Microstructural Aspects and Optimization of Thin Slab Direct Rolling of Steels

By using a thin slab casting simulator combined with the hot deformation simulator WUMSI, laboratory tests were performed to investigate the microstructure processes and mechanical properties in the process of thin slab direct rolling (TSDR). The paper shows the possibilities to improve the initial as‐cast state of microstructure prior to hot rolling (microvoids, dendritic structure, austenite grain size, state of precipitation). The main part of the study is dedicated to the role of microalloying and sulphur for the austenite grain control and for the precipitation hardening in the final structure. On examples of selected low carbon steel grades the effect of the variation of the process parameters of hot rolling and cooling on the microstructure and mechanical properties is presented.     

An interdisciplinary heuristic evaluation method for universal building design

This study highlights how heuristic evaluation as a usability evaluation method can feed into current building design practice to conform to universal design principles. It provides a definition of universal usability that is applicable to an architectural design context. It takes the seven universal design principles as a set of heuristics and applies an iterative sequence of heuristic evaluation in a shopping mall, aiming to achieve a cost-effective evaluation process. The evaluation was composed of three consecutive sessions. First, five evaluators from different professions were interviewed regarding the construction drawings in terms of universal design principles. Then, each evaluator was asked to perform the predefined task scenarios. In subsequent interviews, the evaluators were asked to re-analyze the construction drawings. The results showed that heuristic evaluation could successfully integrate universal usability into current building design practice in two ways: (i) it promoted an iterative evaluation process combined with multi-sessions rather than relying on one evaluator and on one evaluation session to find the maximum number of usability problems, and (ii) it highlighted the necessity of an interdisciplinary ad hoc committee regarding the heuristic abilities of each profession. A multi-session and interdisciplinary heuristic evaluation method can save both the project budget and the required time, while ensuring a reduced error rate for the universal usage of the built environments.     

The effect of banner animation on fixation behavior and recall performance in search tasks

Previous findings suggested that banner ads have little or no impact on perceptual behavior and memory performance in search tasks, but only in browsing paradigms. This assumption is not supported by the present eye-tracking study. It investigates whether task-related selective attention is disrupted depending on the animation intensity of banner ads when users are in a search mode as well as the impact of banner animation on perceptual and memory performance.     

Approximation of graph edit distance based on Hausdorff matching

Graph edit distance is a powerful and flexible method for error-tolerant graph matching. Yet it can only be calculated for small graphs in practice due to its exponential time complexity when considering unconstrained graphs. In this paper we propose a quadratic time approximation of graph edit distance based on Hausdorff matching. In a series of experiments we analyze the performance of the proposed Hausdorff edit distance in the context of graph classification and compare it with a cubic time algorithm based on the assignment problem. Investigated applications include nearest neighbor classification of graphs representing letter drawings, fingerprints, and molecular compounds as well as hidden Markov model classification of vector space embedded graphs representing handwriting. In many cases, a substantial speedup is achieved with only a minor loss in accuracy or, in one case, even with a gain in accuracy. Overall, the proposed Hausdorff edit distance shows a promising potential in terms of flexibility, efficiency, and accuracy.     

Safety approach for composite pressure vessels for road transport of hydrogen. Part 1: Acceptable probability of failure and hydrogen mass

Hydrogen is a promising alternative for current energy carriers. Compressed gas cylinders are the storage systems closest to the commercialization of hydrogen in vehicles. The safety factors in current standards are seen as restrictive for further growth and competitiveness of hydrogen infrastructure. A probabilistic approach can be employed in order to give a rational background to the safety factors. However, an acceptable probability of failure needs to be estimated before calculating the safety factors. The discussion of determining the acceptable probability must include the mass of hydrogen since this determines the consequences of an accident. It is concluded that an annual probability of failure of 10⁻⁷ would be appropriate for small pressure vessels containing a few kilograms of hydrogen. Larger pressure vessels of a few hundred kilograms or more should be designed for an annual probability 10⁻⁸.     

Water Sorption and Diffusion in (Reduced) Graphene Oxide‐Alginate Biopolymer Nanocomposites

The water sorption and diffusion in (reduced) graphene oxide‐alginate composites of various compositions is analyzed. Water sorption of sodium alginate can be significantly reduced by the inclusion of graphene oxide sheets due to the formation of an extensive hydrogen bonding network between oxygenated groups. Crosslinking alginate with divalent metal ions and the presence of reduced graphene oxide can further improve the swelling resistance due to the strong interactions between metal ions, alginate, and filler sheets. Depending on conditions and composition, the overall water barrier properties of alginate composites improve upon (reduced) graphene oxide filling, making them attractive for moisture barrier coating applications. Water sorption kinetics in all alginate composites indicate a non‐Fickian diffusion process that can be accurately described by the Variable Surface Concentration model. In addition, the water barrier properties of sodium alginate‐graphene oxide composites can be adequately predicted using a simple model that takes the orientational order of filler sheets and their effective aspect ratio into account.

     

Optimizing PSMA Radioligand Therapy for Patients with Metastatic Castration-Resistant Prostate Cancer. A Systematic Review and Meta-Analysis

The aim of the review was to evaluate patient and treatment characteristics for patients with metastatic castration-resistant prostate cancer (mCRPC) treated with PSMA radioligand therapy (PRLT) associated with above-average outcome. The systematic review and meta-analysis followed recommendations by the Preferred Reporting Items for Systematic reviews and Meta-Analysis (PRISMA). We searched for publications in PubMed, Embase, and ClinicalTrials.gov up to 31 September 2020. Thirty-six publications and four duplicates reported 2346 patients. Nearly two-thirds of the patients had bone metastases. Median overall survival (OS) was 16 months. Asymptomatic patients and patients with only lymph node metastases lived longer than symptomatic patients and patients with more extensive metastases. Patients treated with an intensified schedule of ¹⁷⁷Lu PRLT lived longer than those treated with a conventional schedule. Half of the patients obtained a PSA decline ≥ 50% and these patients lived longer than those with less PSA decline. Approximately 10% of the patients developed hematologic toxicity with anemia grade 3 as the most severe adverse effect. Characteristics for patients, cancer, restaging, and PRLT predict above average overall survival following treatment with PRLT.     

Phase behavior,density, and crystallization of polyethylene in n‐pentane and in n‐pentane/CO2 at high pressures

The phase behavior and volumetric properties of polyethylene (PE) in solutions of n‐pentane and n‐pentane/CO₂ were studied in a temperature (T) range of 370–440 K at pressures up to 60 MPa. Measurements were conducted with a variable‐volume view‐cell system equipped with optical sensors to monitor the changes in the transmitted light intensity as the P or the T of the system was changed. Lower‐critical‐solution‐temperature‐type behavior was observed for all of the liquid–liquid (L–L) phase boundaries, which shifted to higher pressures in solutions containing CO₂. The solid–fluid (S–F) phase boundaries were investigated over a P range of 8–54 MPa and took place in a narrow T range, from 374 to 378 K in this P interval. The S–F phase boundary showed a unique feature in that the demixing temperatures showed both increasing and decreasing trends with P depending on the P range. This was observed in both the PE/n‐pentane and PE/n‐pentane/CO₂ mixtures. The density of these solutions were measured as a function of P at selected temperatures or as a function of T at selected pressures that corresponded to the paths followed in approaching the phase boundaries (S–F or L–L) starting from a homogeneous one‐phase condition. The data showed a smooth variation of the overall mixture density along these paths. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2201–2209, 2003     

Quantitative proof of liquid penetration-involved granule formation in a high shear mixer

Previous work of the authors [K. van den Dries, H. Vromans, Qualitative proof of liquid penetration-involved nucleation in a high shear mixer, Eur. J. Pharm. Sci. 58 (2004), 551–559.] revealed that the granule formation in a high shear mixer depends on a balance between the rate of liquid penetration and binder dispersion. Three distinct nucleation mechanisms could be qualified; (I) granule formation by liquid penetration followed by granule breakage or (II) absence of granule breakage and (III) complete dispersion of the binder liquid. The aim of this study was to quantify the mechanisms of granule formation. A substandard amount (1.5% w/w) of binder liquid was added to a lactose mixture, while the mixer was operating. The powder mixture was frozen with liquid nitrogen after 15 s and analysed by sieving. The results show that, despite the minimal liquid amount, granules are formed under most conditions. It is argued granules are being formed by a liquid penetration process. These freshly formed granules are broken down at low viscosity (< 1 Pa s) and remain intact at higher viscosity (> 1 Pa s). Only at extreme conditions (viscosity > 30 Pa s) hardly any granules are formed. In this case penetration of the liquid becomes practically impossible and the binder is completely dispersed. A model based on the processes of liquid penetration, binder dispersion and granule breakage, confirms the observed nucleation behaviour. It is conclusively shown that an increase in viscosity results in a transition from nucleation mechanism I→II→III.     

Gold recovery from dilute gold solutions using DEAE-cellulose

The present work investigates gold recovery using DEAE-cellulose, a common biopolymer derivative, from synthetically prepared diluted gold-bearing solutions of 50 ppm. The effects of different recovery parameters on gold recovery efficiency were studied in detail. It was demonstrated that gold recovery efficiency increased with an increasing amount of sorbent, as well as increasing contact time. A gold recovery efficiency of 99% was attained under conditions of 20–40 g DEAE-cellulose per liter at a shaking rate of 130 rpm for 30 min at room temperature. On the other hand, with smaller amounts of sorbent (6 g/l), it was also possible to recover gold from the solution with 99% efficiency when the reaction temperature was increased to 60 °C. The shaking rate and temperature were demonstrated to play a vital role in the recovery process. It was also found that gold recovery by DEAE-cellulose is an intermediate-controlled process with an activation energy of 37.11 kJ/mol. The XRD pattern and SEM images revealed that the recovered gold was in the metallic form.