Alarm pheromone system of leaf-footed bugLeptoglossus zonatus (Heteroptera: Coreidae)

The alarm pheromone system ofLeptoglossus zonatus (Dallas) adults was shown to be composed of hexyl acetate, hexanol, hexanal, and hexanoic acid. Single components tested in the field elicited dispersive behavior of over 70% of adults. 2-(E)-Hexenal, found in the secretion of nymphs, but not in the exudates of adults, was also active against adults. In addition, first-instar nymphs responded to the four components of the alarm pheromone of adults as well as to 2-(E)-hexenal, a component of their own alarm pheromone system. Adults and nymphs possess different alarm pheromone systems, which are not specific to their own life stage. That hemipteran alarm pheromone systems are not species-specific was supported by the fact that both adult and nymphL. zonatus responded to butanoic acid, an alarm pheromone of Alydidae, which was not found in this Coreidae species.     

Distributed Control Strategy with Smith's Predictor in a Pilot-Scale Diabatic Distillation Unit

Intrinsic characteristics of distillation such as dead time and high nonlinearities do not allow the complete elimination of transient times when any external disturbance or set-point change occurs. Thus, aiming at the use of easy-tuning systems, a distributed-action control in trays of a diabatic distillation unit with Smith's predictor was implemented in the Simulink environment to further reduce transient times and out-of-specification product. The distributed-action strategy with Smith's predictor led to a reduction of 33.3 min (33 %) in the transient time of the top temperature control loop and 66 % in out-of-specification product, when compared with the conventional strategy, and thus is shown to be an efficient approach to increasing the productivity of distillation plants.     

Survey and comparison of message authentication solutions on wireless sensor networks

Security is an important concern in any modern network. This also applies to Wireless Sensor Networks (WSNs), especially those used in applications that monitor sensitive information (e.g., health care applications). However, the highly constrained nature of sensors imposes a difficult challenge: their reduced availability of memory, processing power and energy hinders the deployment of many modern cryptographic algorithms considered secure. For this reason, the choice of the most memory-, processing- and energy-efficient security solutions is of vital importance in WSNs. To date, a number of extensive analyses comparing different encryption algorithms and key management schemes have been developed, while very little attention has been given to message authentication solutions. In this paper, aiming to close this gap, we identify cipher-based Message Authentication Codes (MACs) and Authenticated Encryption with Associated Data (AEAD) schemes suitable for WSNs and then evaluate their features and performance on a real platform (TelosB). As a result of this analysis, we identify the recommended choices depending on the characteristics of the target network and available hardware.     

Nanofluid Flow and Heat Transfer in Boundary Layers: The Influence of Concentration Diffusion on Heat Transfer Enhancement

ABSTRACT

The present work uses a perturbation procedure to deduce the small perturbation differential equations for velocity, temperature, and the diffusion equation for nanoparticle volume concentration. Thermophysical variables are obtained from conventional means (e.g., mixture and field theory estimates) for nanofluids consisting of alumina nanoparticles dispersed in water (alumina–water nanofluid) and gold nanoparticles dispersed in water (gold–water nanofluid), and, in the case of gold–water nanofluid, molecular dynamics results are used to estimate such properties, including the transport coefficients. The very thin diffusion layer, at large Schmidt numbers, is found to have a great impact on the velocity and temperature profiles, owing to the transport property dependency and has a profound influence on surface conduction heat transfer rate enhancement and skin friction suppression for the case of nanofluid concentration withdrawal at the wall. In this case, the diffusional heat transfer rate is negligible, again, owing to the large Schmidt numbers encountered. Possible experiments directed at this interesting phenomenon are discussed.     

Synthesis and characterization of cellulose acetate from royal palm tree agroindustrial waste

This study provides a novel value‐added utilization of the agroindustrial waste of royal palm tree leaf sheath to produce cellulose acetate. One of the motivations of this work was the fact that Brazil is one of the largest heart of palm producers in the world. However, as a result of extraction and processing, tons of waste are generated and discharged to the environment. Such waste is rich in lignocellulosic material, which could be reused to obtain derivatives of interest and commercial value. The synthesis of cellulose acetate was performed through a homogeneous acetylation reaction. Three different conditions were tested for delignification of the raw material, which resulted in a reduction in lignin content from 17.75 to 7.72%. The highest yield of cellulose acetate reached 99.5%, with degree of substitutions ranging between 2.08 and 2.82, which indicates satisfactory conversion. The Fourier transform infrared spectrum showed that practically all hydroxyl groups were replaced by acetate groups; this was also confirmed by nuclear magnetic resonance analysis. X‐ray diffraction analysis showed that the cellulose acetate crystallinity index was 8.9%. This demonstrates the viable potential of cellulose acetate production with low cost and use of highly available agroindustrial waste. POLYM. ENG. SCI., 59:891–898, 2019. © 2018 Society of Plastics Engineers     

Prediction and comparison of textural properties of magnetic copolymer supports for enzyme immobilization

Magnetic polymers supports have proven to be valuable materials for enzyme immobilization, as they allow recovering the catalyst by magnetic separation, precluding the need for costly and time-consuming separation steps. In this study, magnetic copolymer supports were synthesized using styrene (STY) and different crosslinking agents (divinylbenzene, ethylene glycol dimethacrylate, or triethylene glycol dimethacrylate) and initiators (azobisisobutyronitrile or benzoyl peroxide) and used to immobilize Candida antarctica lipase B (CALB). The aim was to obtain biocatalysts with high enzymatic activity and satisfactory morphological properties for use in biotransformation reactions. Two morphological properties known to influence the immobilization yield were taken into consideration, specific surface area, and swelling index. Experimental data were compared to the predictions of a model based on molar balance, method of moments, numerical fractionation, and elementary gel structures. The high correlation (R² = 0.9974) between experimental and predicted values demonstrated the suitability of the model for estimating the textural properties of enzyme supports. CALB was successfully immobilized, showing high hydrolytic activity (500–700 U g⁻¹) and good thermal stability at 50°C. CALB/STY-EGDMA-M was 14 times more stable than free CALB. The results confirm the efficiency of the immobilization method and the suitability of the copolymers for enzyme immobilization.     

Femtosecond Ti: Sa ultra short-pulse laser irradiation effects on the properties and morphology of the zirconia surface after ageing

Femtosecond pulses from a Ti:Sapphire laser were used to irradiate specimens of yttria-stabilised (35% mol) tetragonal zirconia (Y-TZP) with the purpose of studying the effects of the irradiations on their surface properties and morphology after ageing. Zirconia disks were divided into eight groups (n = 32) according to their surface treatment and subsequent ageing: Control: no treatment; sandblasting: Al₂O₃ sandblasting 50 μm; and ultrashort laser pulses irradiation with 25 μJ pulses, considering two different scanning steps based on the width between two grooves. These groups were duplicated and submitted to ageing. The surfaces were analysed using scanning electron microscopy (SEM), and X-ray diffraction. A finite element analysis, a biaxial flexure test, as well as fractographic and Weibull analyses, were performed. The strengths of the disks were statistically different for the treatment factor, and the principal stresses seemed to be concentrated at the centre of the specimens, as predicted by the computer simulations. Ageing decreased the strengths for all groups and increased the Weibull modulus for the laser group with the 40 μm-width between two grooves. The sandblasting group presented the highest monoclinic phase peak. Although the most significant strength was found within the sandblasting group, the phase transformation was favourable to the laser groups. The Weibull modulus was higher for the laser group with the 60 μm-width between two grooves, confirming the highest homogeneity of its failure distribution. Regardless of the surface treatment, strength was decreased with ageing in all groups. The femtosecond Ti:Sa ultra-short pulse laser irradiation can be suggested as an alternative to the gold standard sandblasting in long-term Y-TZP zirconia rehabilitations, such as crowns and veneers.     

Synthesis of Isopropyl Palmitate by Lipase Immobilized on a Magnetized Polymer Matrix

Penicillium camemberti lipase immobilized on a magnetized poly(styrene-co-divinylbenzene) was used as a biocatalyst for isopropyl palmitate synthesis. The reaction conditions were determined by 2² factorial central composite design. A mathematical model based on a simplified kinetic approach was developed to describe the system and validated with the experimental data. An assay carried out in a stirred-tank reactor confirmed the proposed model. The ester was purified and the properties such as density and water content were similar to those found in commercially available isopropyl palmitate.