Relaxations in semicrystalline polyethyleneterephthalate using thermally stimulated currents

Relaxation processes at temperatures above 20 °C in semicrystalline polyethylene-terephthalate have been studied using thermally stimulated depolarization currents (TSDC). The discharge curve shows three relaxation peaks (c, c and *) whose positions and intensities depend on the polarization conditions and the crystallinity. Relaxations c and c are heteropolar, while * may be homopolar or heteropolar according to the polarization temperature used. The effect of the crystallinity on these relaxations has been analysed by the thermal steps stimulation (TSS) method applied to an amorphous sample. Results show that c is fundamentally a dipolar relaxation associated with the amorphous interlamellar zone. The relaxation c is associated with the release of a free charge trapped in the amorphous regions, and * is a Maxwell–Wagner–Sillars relaxation associated with crystalline – amorphous interphases. For polarization temperatures above 150 °C, two relaxations are observed only as a consequence of overlapping C and * relaxations. © 1998 Chapman & Hall     

Behavior of a periodic chromatic test with an achromatic Ronchi grating as a background

The aim of this article is to study the influence of an achromatic Ronchi grating (white and black stripes) used as a background, over a periodic chromatic test (red or green). Depending on the grating frequency, two parameters were used to study this influence: modulation ratio and grating contrast. © 2011 Wiley Periodicals, Inc. Col Res Appl, 2012     

Addition of a reactive diluent to a catalyzed epoxy-anhydride system. I. Influence on the cure kinetics

The effect of a reactive diluent (RD) on the kinetics of the curing of an epoxy resin, based on diglycidyl ether of bisphenol A (DGEBA), with a carboxylic anhvdride derived from methyl-tetrahydrophthalic anhydride (MTHPA) catalyzed by a tertiary amine has been studied. The reactive diluent was a low-viscosity aliphatic diglycidyl ether, and the compositions per 100 parts by weight (pbw) of DGEBA were 10, 30, and 50 pbw of RD with the stoichiometric quantity of MTHPA and 1 pbw of catalyst. The curing kinetics was monitored by differential scanning calorimetry (DSC), and the kinetic parameters were determined from the nonisothermal DSC curves by the method described by Málek. The kinetic analysis suggests that the two-parameter autocatalytic model is the more appropriate to describe the kinetics of the curing reaction of this epoxy-anhydride system. The kinetic parameters thus derived satisfactorily simulate both the nonisothermal DSC curves and the isothermal conversion-time plots. Increasing the RD content leads to a small increase in both the nonisothermal and the isothermal heats of curing and has a slight effect on the kinetic parameters E, ln A, m, and n, and, consequently, on the overall reactivity of the system. On the other hand, the increase of the RD content significantly affects the structure of the crosslinked epoxy. It is confirmed that the introduction of aliphatic chains in the structure of the epoxy increases the mobility of the segmental chains in the glass transition region. The consequence of this chemical modification is a decrease of the glass transition temperature, T_g. © 1996 John Wiley & Sons, Inc.     

Tape casting of strontium and cobalt doped lanthanum chromite suspensions

Lanthanum chromite (LaCrO₃) is currently the most widely studied material as interconnector layers for solid oxide fuel cells (SOFC). The complexity of microstructures and geometries of SOFC devices, which are usually built-up by lamination of the different constitutive layers, make it necessary a precise control of processing parameters to achieve the desired combination of properties. Much effort has been devoted to the processing of electrodes and electrolytes but the other layers, such as that of interconnecting material, have received scarce attention. This work deals with the preparation and optimisation of the rheological behaviour of concentrated suspensions of Sr- and Co-doped LaCrO₃ and the subsequent tape casting to produce homogeneous thin sheets to be used in the SOFC stack.The starting powder was produced by combustion synthesis from the corresponding nitrates and urea as a fuel, and had a final composition of La_0.80Sr_0.20Cr_0.92Co_0.08O₃. These powders were dispersed in ethanol with commercial copolymers (Hypermer, KD6) to solids loading of up to 58 wt%. The binding system (BS) consisted of a mixture of a binder, polyvinyl butyral-co-vinyl alcohol-co-vinyl acetate (PVA-PVAc), and two plasticizers, polyethyleneglycol (PEG400) and benzylbutylphthalate (BBP). The effect of the binding system content and the binder-to-plasticizer ratio on the tape casting performance and the characteristics of the green and the sintered tapes, were studied, as well as the influence of the casting parameters (casting speed and blades height).     

Huntingtin-associated protein 1 (HAP1) interacts with the p150Glued subunit of dynactin

Huntington's disease (HD) is an inherited neurodegenerative disease caused by expansion of a polyglutamine repeat in the HD protein huntingtin. Huntingtin's localization within the cell includes an association with cytoskeletal elements and vesicles. We previously identified a protein (HAP1) which binds to huntingtin in a glutamine repeat length-dependent manner. We now report that HAP1 interacts with cytoskeletal proteins, namely the p150 Glued subunit of dynactin and the pericentriolar protein PCM-1. Structural predictions indicate that both HAP1 and the interacting proteins have a high probability of forming coiled coils. We examined the interaction of HAP1 with p150 Glued . Binding of HAP1 to p150 Glued (amino acids 879-1150) was confirmed in vitro by binding of p150 Glued to a HAP1-GST fusion protein immobilized on glutathione-Sepharose beads. Also, HAP1 co-immunoprecipitated with p150 Glued from brain extracts, indicating that the interaction occurs in vivo . Like HAP1, p150 Glued is highly expressed in neurons in brain and both proteins are enriched in a nerve terminal vesicle-rich fraction. Double label immunofluorescence experiments in NGF-treated PC12 cells using confocal microscopy revealed that HAP1 and p150 Glued partially co-localize. These results suggest that HAP1 might function as an adaptor protein using coiled coils to mediate interactions among cytoskeletal, vesicular and motor proteins. Thus, HAP1 and huntingtin may play a role in vesicle trafficking within the cell and disruption of this function could contribute to the neuronal dysfunction and death seen in HD.     

Severe and mild forms of nemaline myopathy: a report of three cases

Three new cases of two different forms of congenital nemaline myopathy are reported. Two of them represent a severe neonatal form. These cases were presented as a floppy infant syndrome. Although neither of them needed intensive care, they had feeding difficulties and one needed a feeding-tube for a period of time. Both of the patients showed a very severe motor delay and neither could manage to walk independently. During their lives, they suffered from repeated pneumonias, which was the cause of death in both cases before the age of two years. The mild congenital type represents a more benign form. Although hypotonic and weak, the patient managed to walk independently before two years of age. The weakness was spread all over, but was focused in the face, extensors of the neck and axial muscles. At 9 years of age, the patient has not experienced any respiratory trouble. The CK (creatine kinase) test were normal in all patients, but the EMG (electromyogram) showed different electromyographic patterns. The rods were in subsarcolemic positions, cytoplasmic positions or in both positions.