Fractal error for detecting man-made features in aerial images

A technique is proposed for aiding photointerpreters in detecting man-made features in aerial reconnaissance images. The technique, which uses a metric called fractal error, is based on the observed propensity of natural image features to fit a fractional Brownian motion model. Man-made features usually do not fit this model well, and consequently the fractal error metric may be used as a discriminant function for detecting man-made scene features     

Juvenile competence to stand trial evaluations: A survey of current practices and test usage among psychologists.

What is the current standard of practice for evaluations of juvenile competence to stand trial (JCST)? The present study surveyed psychologists regarding the practices used when conducting JCST evaluations. Respondents rated the importance of 17 elements that might be included in a JCST evaluation report. Of these elements, 7 were considered essential by 70% or more of respondents, with 9 additional elements rated as either essential or recommended. A majority of respondents felt that the use of psychological and forensic instruments was important. A list of tests used is provided, and the implications for the development of standards and policy are discussed to provide practitioners with additional knowledge that will help to further the state of the discipline. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Investigation of Arrhenius acceleration factor for integrated circuit early life failure region with several failure mechanisms

Use of the Arrhenius equation for analysis of burn-in and life test data has been called into question in recent years. Validity of the Arrhenius activation energy is asserted to be restricted to only one failure mechanism. Therefore, if multiple failure mechanisms apply to an integrated circuit type, the temperature acceleration factor must be complex. In this study a model is constructed using the Weibull distribution for the failure rate applicable when there are multiple failure mechanisms. In this model a different Arrhenius activation energy corresponds to each failure mechanism. It is shown that under conditions expected to be valid for most integrated circuits, an empirical effective Arrhenius activation energy can be computed that is valid for life test data taken under typical conditions to better than 10%. This provides some justification for the continued usage of a simple Arrhenius equation as an empirical model to analyze life test data.     

THEORETICAL STUDY OF A NEW MATERIAL FOR FILTERS: AEROGELS

Aerogels are highly porous materials made by removing the liquid phase of a dilute suspension of solids by taking off the vapor under super-critical temperature and pressure conditions. The aerogel structure has a skeleton of nanometer-size elements forming pores that are tens of nanometers in dimension. In some cases the structure of the aerogel arises from clusters having fractal geometry. The collection efficiency and pressure drop for such material is predicted here from models in the literature. A quality factor is used to compare aerogel material with other filter materials. The quality factor relating gas filtration efficiency with pressure drop is predicted to be unusually high for these materials in comparison with other common fibrous filter media, predicting lower flow resistance for aerogels at equivalent particle collection efficiency levels.     

Structural and Superconducting Property Variations with Nominal Mg Non‐Stoichiometry in MgxB2 and Its Enhancement of Upper Critical Field

By applying a combination of characterisation tools, changes in structural and superconducting properties with nominal Mg non‐stoichiometry in Mg_xB₂ are found. The non‐stoichiometry produces enhanced in‐field critical current densities (J_c's) and upper critical field / irreversibility field (H_c2/H_irr(T)) values. Upper critical fields of ～ 21 T (4.2 K) were obtained in nominal Mg‐deficient samples compared to ～ 17 T (4.2 K) for near‐stoichiometric samples.     

Performance of natural‐fiber–plastic composites under stress for outdoor applications: Effect of moisture,temperature, and ultraviolet light exposure

The effects of moisture, temperature, and ultraviolet (UV) light on performance of natural‐fiber–plastic composites (NFPC) were assessed. We conducted short‐term tests in the laboratory and long‐term tests under natural exposure and measured changes in mechanical properties and color in samples of the composite. Chemical changes of the composite's materials were measured by X‐ray photoelectron spectroscopy to elucidate the mechanisms of chemical transformations on the material surface. Relative humidity highly affected the modulus of rupture (MOR) and the modulus of elasticity (MOE), and had a greater effect than temperature and UV exposure on performance of the composite. The lightness of the composite was increased by the UV effect in the short‐ and the long‐term tests. The X‐ray photoelectron spectroscopy (XPS) analysis suggested that the composite was protected by the UV absorber. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 2570–2577, 2006     

Food aversion conditioned in anesthetized sheep

We discovered that a food aversion could be conditioned in anesthetized sheep. Sheep were allowed to eat a familiar food (alfalfa-grain pellets) for 30 min, and 90 min later they were given either an intraruminal (IR) injection of water (C), an IR injection of LiCl (L), anesthesia followed by an IR injection of water (A), or anesthesia followed by an IR injection of LiCl (A+L). Induction of anesthesia was by an intravenous injection of pentobarbitone sodium, and maintenance of deep anesthesia was by halothane. Sheep were maintained in deep anesthesia for 2 h to ensure that the effects of LiCl on the acquisition of a food aversion, which occur within about 1 h, were completed before they awakened. When tested 5 days later, sheep that received LiCl (treatments L and A+L) consumed less alfalfa-grain pellets than sheep that did not receive LiCl (treatments C and A) (241 g vs. 306 g; p = 0.057). Intake of sheep that were anesthetized (treatments A and A+L) did not differ from that of sheep that were not anesthetized (treatments C and L) (295 g vs. 252 g; p = 0.183). Nor was there an interaction between LiCl and anesthesia (p = 0.423). Thus, we conclude that changes in preferences for foods caused by postingestive feedback occur automatically every time food is ingested (i.e., they are noncognitive), and the kind and amount of feedback is a function of the match between the food's chemical characteristics and its ability to meet the animal's current demands for nutrients.     

Concordance between ANSI occupational back injury codes and claim form diagnoses and a lower bound estimate of the fraction associated with disc displacement/herniation

The current BLS Annual Survey of Occupational Illnesses and Injuries and several recent analyses of factors affecting missed worktime in occupational back injuries rely on ANSI-based injury codes derived from injury narratives to classify occupational injuries and estimate incidence and outcome. No population-based studies of the concordance between back injury codes and clinical diagnoses have been reported. Back injury cases were identified in two large work-injured populations totaling almost 80,000 cases in the states of Michigan and Minnesota. In both populations, cases had been coded by the single nature-of-injury and part-of-body-injured codes assigned by an ANSI-based injury-coding system and by as many as four (Michigan) or three (Minnesota) clinical diagnoses according to the International Classification of Diseases-Clinical Modification, 9th Revision. Concordance was measured by the sensitivity and predictive value positive (PVP, aka PV+ or PPA) of the injury coding scheme for related diagnostic groups. We also used an algorithm based on the limited clinical information available to corroborate the diagnosis of displaced/herniated disc for cases that underwent spinal surgery. Cases identified by the algorithm were then used to obtain a lower bound estimate of the fraction with disc injury. The injury coding scheme had PVPs of 82.9-90.1% and overall sensitivities of 69.7-75.9%. Sensitivities for individual diagnostic groups show that their distribution in ANSI-coded injury groups is skewed slightly toward cases with sprain and disc displacement/herniation, but these shifts are modest. The lower bound estimate of the fraction of cases with disc displacement/herniation in a population of cases with back injuries producing at least 1 day of missed worktime is 5.8%. The demographic comparisons indicate that, as the time between injury and cohort ascertainment increases during the first 8 days of missed worktime following injury, the proportion of younger workers in an injury cohort decreases. The relationship between increasing age and increasing missed worktime disability, reported in various outcome studies, is also present during the first few days following injury. The use of ANSI injury codes underestimates the contribution of back injuries to missed worktime because 24-30% of cases are missed by the ANSI coding system. However, the distribution of diagnostic groups in the injury-coded groups approximates that observed with all diagnosed cases and supports the use of such data to study outcome. Our estimate, and one from Quebec, suggest that disc displacement/herniation occurs more frequently in the subset of occupational back injuries compared to the set of back injuries from all sources.