Electrophoretic deposition of graphene oxide on carbon brush as bioanode for microbial fuel cell operated with real wastewater

Microbial fuel cell (MFC) is a promising technology for simultaneous wastewater treatment and energy harvesting. The properties of the anode material play a critical role in the performance of the MFC. In this study, graphene oxide was prepared by a modified hummer's method. A thin layer of graphene oxide was incorporated on the carbon brush using an electrophoretic technique. The deoxygenated graphene oxide formed on the surface of the carbon brush (RGO-CB) was investigated as a bio-anode in MFC operated with real wastewater. The performance of the MFC using the RGO-CB was compared with that using plain carbon brush anode (PCB). Results showed that electrophoretic deposition of graphene oxide on the surface of carbon brush significantly enhanced the performance of the MFC, where the power density increased more than 10 times (from 33 mWm^?2 to 381 mWm^?2). Although the COD removal was nearly similar for the two MFCs, i.e., with PCB and RGO-CB; the columbic efficiency significantly increased in the case of RGO-CB anode. The improved performance in the case of the modified electrode was related to the role of the graphene in improving the electron transfer from the microorganism to the anode surface, as confirmed from the electrochemical impedance spectroscopy measurements.     

GaAs/AlGaAs grating surface-emitting diode lasers on Si substrates

A monolithic grating surface-emitting, GaAs/AlGaAs, separate-confinement-heterostructure, single-quantum-well diode laser has been fabricated on a Si substrate using a single-step metalorganic chemical vapour deposition process. An output power of 30 mW has been obtained under pulsed operation with a peak emission wavelength of 885 nm.<>     

Dynamic mechanical and tensile properties of poly(N-vinyl pyrrolidone)-poly(ethylene glycol) blends

Mechanical properties of miscible blends of high molecular weight poly(N-vinyl pyrrolidone) (PVP) with a short-chain, liquid poly(ethylene glycol) (PEG) of molecular weight 400 g/mol have been examined as a function of PVP-PEG composition and degree of hydration. The small-strain behavior in the linear elastic region has been evaluated with the dynamic mechanical analysis and compared with the viscoelastic behavior of PVP-PEG blends under large strains in the course of uniaxial drawing to fracture and under cyclic extension. A strong decoupling between the small-strain and the large strain properties of the blends has been observed, indicative of a pronounced deviation from rubber elasticity in the behavior of the blends. This deviation, also seen on tensile tests under fast drawing, is attributed to the peculiar phase behavior of the blends and the molecular mechanism of PVP-PEG interaction. Nevertheless, for the PVP blend with 36% PEG, under comparatively low extension rates, the reversible contribution to the total work of deformation up to ε=300% has been found to be maximum at around 70%, while the blends containing 31 and 41% PEG behave rather as an elastic-plastic solid and a viscoelastic liquid, respectively.     

A vision towards Scientific Communication Infrastructures

The two pillars of the modern scientific communication are Data Centers and Research Digital Libraries (RDLs), whose technologies and admin staff support researchers at storing, curating, sharing, and discovering the data and the publications they produce. Being realized to maintain and give access to the results of complementary phases of the scientific research process, such systems are poorly integrated with one another and generally do not rely on the strengths of the other. Today, such a gap hampers achieving the objectives of the modern scientific communication, that is, publishing, interlinking, and discovery of all outcomes of the research process, from the experimental and observational datasets to the final paper. In this work, we envision that instrumental to bridge the gap is the construction of “Scientific Communication Infrastructures”. The main goal of these infrastructures is to facilitate interoperability between Data Centers and RDLs and to provide services that simplify the implementation of the large variety of modern scientific communication patterns.     

Broccoli leaf powder as an attractive by-product ingredient: effect on batter behaviour,technological properties and sensory quality of gluten-free mini sponge cake

Broccoli by-products, in particular leaves, are rich sources of nutritional and bioactive components thus could constitute a valuable food additive. Although an upsurge in quantity of gluten-free products is observed further studies are required on improvement of their nutritional quality and palatability. This study aimed to investigate the influence of broccoli leaf powder (BLP) on dough behaviour, and technological characteristics and sensory quality of gluten-free mini sponge cake (GFS). Broccoli leaf powder replaced an equivalent amount (2.5%, 5%, 7.5%; w/w) of corn and potato starches in GFS formulation. Applied BLP increased the instrumental firmness of GFS but sensorial attributes (elasticity, crustiness, mastication and adhesiveness) were similar to the control. All broccoli GFS were vividly green, had small size pores properly distributed. Among them, sample with 2.5% BLP was distinguished for its desirable sensory quality, despite a slightly perceived cabbage aroma and taste. Moderate amount of BLP allows to preserve a good quality GFS improving its attractiveness and palatability.     

Assessment of intradialysis calcium mass balance by a single pool variable‐volume calcium kinetic model

Introduction: A reliable method of intradialysis calcium mass balance quantification is far from been established. We herein investigated the use of a single‐pool variable‐volume Calcium kinetic model to assess calcium mass balance in chronic and stable dialysis patients. Methods: Thirty‐four patients on thrice‐weekly HD were studied during 240 dialysis sessions. All patients were dialyzed with a nominal total calcium concentration of 1.50 mmol/L. The main assumption of the model is that the calcium distribution volume is equal to the extracellular volume during dialysis. This hypothesis is assumed valid if measured and predicted end dialysis plasma water ionized calcium concentrations are equal. A difference between predicted and measured end‐dialysis ionized plasma water calcium concentration is a deviation on our main hypothesis, meaning that a substantial amount of calcium is exchanged between the extracellular volume and a nonmodeled compartment. Findings: The difference between predicted and measured values was 0.02 mmol/L (range ?0.08:0.16 mmol/L). With a mean ionized dialysate calcium concentration of 1.25 mmol/L, calcium mass balance was on average negative (mean ± SD ?0.84 ± 1.33 mmol, range ?5.42:2.75). Predialysis ionized plasma water concentration and total ultrafiltrate were the most important predictors of calcium mass balance. A significant mobilization of calcium from the extracellular pool to a nonmodeled pool was calculated in a group of patients. Discussion: The proposed single pool variable‐volume Calcium kinetic model is adequate for prediction and quantification of intradialysis calcium mass balance, it can evaluate the eventual calcium transfer outside the extracellular pool in clinical practice.     

An Innovative Science Gateway for the Cherenkov Telescope Array

The Cherenkov Telescope Array (CTA) is currently building the next generation, ground-based, very high-energy gamma-ray instrumentation. CTA is expected to collect very large datasets (in the order of petabytes) which will have to be stored, managed and processed. This paper presents a graphical user interface built inside a science gateway aiming at providing CTA-users with a common working framework. The gateway is WS-PGRADE/gUSE workflow-oriented and is equipped with a flexible SSO (based on SAML) to control user access for authentication and authorization. An interactive desktop environment is provided, called Astronomical & Physics Cloud Interactive Desktop (ACID). Users are able to exploit the graphical interface as provided natively by the tools included in ACID. A cloud data service shares and synchronizes data files and output results between the user desktop and the science gateway. Our solution is a first attempt towards an ecosystem of new technologies with a high level of flexibility to suit present and future requirements of the CTA community.