Afterburner [network-independent card for protocols]

Many current implementations of protocols such as the Transmission Control Protocol/Internet Protocol (TCP/IP) are inefficient because data are often accessed more frequently than necessary. Three techniques that reduce the need for memory bandwidth are proposed. The techniques are copy-on-write, page remapping, and single-copy. Afterburner, a network-independent card that provides the services that are necessary for a single-copy protocol stack, is described. The card has 1 MByte of local buffers and provides a simple interface to a variety of network link adapters, including HIPPI and asynchronous transfer mode (ATM). Afterburner can support transfers to and from the link adapter card at rates up to 1 Gbit/s. An implementation of TCP/IP that uses the features provided by Afterburner to reduce the movement of data to a single copy is discussed. Measurements of the end-to-end performance of Afterburner and the single-copy implementation of TCP/IP are presented     

Internet robots: a new robotics niche

Web robots are a concept that has captured the interest of researchers and developers. Their potential is being investigated at the University of Western Australia, where a six-axis robot has been made teleoperable over the World Wide Web. The site has been active since September 1994 and the robot has also been exhibited at the Australian National Science and Technology Centre in Canberra. Someone considering offering services with this technology will be interested in which groups of people find it attractive, the level of commitment that operators show, and how the robot users behave. These questions are addressed in the article with some demographic data on operators, an analysis of how long they remain interested, and an examination of how long they will wait to access the service. The user interface affects operator behavior, so some interface variations and their effect on operator actions are considered. The opportunities presented, likely application areas, and the potential for generating an income are examined     

Electrochemically Tuned Properties for Electrolyte‐Free Carbon Nanotube Sheets

Injecting high electronic charge densities can profoundly change the optical, electrical, and magnetic properties of materials. Such charge injection in bulk materials has traditionally involved either dopant intercalation or the maintained use of a contacting electrolyte. Tunable electrochemical charge injection and charge retention, in which neither volumetric intercalation of ions nor maintained electrolyte contact is needed, are demonstrated for carbon nanotube sheets in the absence of an applied field. The tunability of electrical conductivity and electron field emission in the subsequent material is presented. Application of this material to supercapacitors may extend their charge‐storage times because they can retain charge after the removal of the electrolyte.     

40-GHz polymer electrooptic phase modulators

A broad-band high-frequency traveling wave electrooptic phase modulator made from stable nonlinear optical polymers has been tested. Using a 1.319-μm light source, single-mode operation was achieved with high-input optical power, resulting in improved modulation depths and signal-to-noise ratios. The high-frequency optical modulation was observed up to 40 GHz using external microwave mixers. Direct optical-heterodyne detection of electrooptic phase modulation has also been demonstrated with high sensitivity at 40 GHz. The devices were tested with 10⁵ W/cm² power density for 21 hours, and have showed no observable decay in nonlinearity     

为在巴西引入数字电视提交的"公开咨询报告"文稿第291号

1 引言 由"国家电信局"(National Telecommunications Agency,Anatel)主持的数字电视在巴西的首次"公开咨询报告"(Public Consultation)的一年后,我们注意到:在这种技术的领域内,已经出现很多不同的显著事实.除了"CPqD基金会"报告以外,新的对比性测试曾经在美国(ATSC对DVB-T)和中国香港(ATSC,DVB-T和ISDB-T)都进行过.还有一些报道表明:中国台湾也进行了对比性测试,目的是确立自己的数字电视标准.     

Sub-1 V band-gap based and MOS threshold-voltage based voltage references in 0.13 µm CMOS

Portable and implantable device applications require low supply voltage reference circuits due to increasing trend for lower power requirements. Voltage references have been proposed for operation below 1 V for CMOS and a comprehensive analysis of the behavior of the different topologies is needed for ultra-low power designs, in order to select the right circuit topology for a given requirement. This work compares two major classes of voltage reference topologies: threshold voltage (V_T0)-based and (V_G0) bandgap voltage-based reference circuits. Four different topologies of voltage-reference designs with 1-V supply were designed and fabricated in 130 nm CMOS process. Monte Carlo analysis shows the variability of the references and of their temperature coefficients (TC), and the results are compared to measured samples. Simulations and measurements show that the threshold voltage-based references are more susceptible to the variations in the CMOS fabrication process.     

Hierarchical Self‐Assembly of Peptide‐Coated Carbon Nanotubes

Numerous applications, from molecular electronics to super‐strong composites, have been suggested for carbon nanotubes. Despite this promise, difficulty in assembling raw carbon nanotubes into functional structures is a deterrent for applications. In contrast, biological materials have evolved to self‐assemble, and the lessons of their self‐assembly can be applied to synthetic materials such as carbon nanotubes. Here we show that single‐walled carbon nanotubes, coated with a designed amphiphilic peptide, can be assembled into ordered hierarchical structures. This novel methodology offers a new route for controlling the physical properties of nanotube systems at all length scales from the nano‐ to the macroscale. Moreover, this technique is not limited to assembling carbon nanotubes, and could be modified to serve as a general procedure for controllably assembling other nanostructures into functional materials.     

Insulator‐Conductor Type Transitions in Graphene‐Modified Silver Nanowire Networks: A Route to Inexpensive Transparent Conductors

Silver nanowire coatings are an attractive alternative to indium tin oxide for producing transparent conductors. To fabricate coatings with low sheet resistance required for touchscreen displays, a multi‐layer network of silver nanowires must be produced that may not be cost effective. This problem is counteracted here by modifying the electrical properties of an ultra‐low‐density nanowire network through local deposition of conducting graphene platelets. Unlike other solution‐processed materials, such as graphene oxide, our pristine graphene is free of oxygen functional groups, resulting in it being electrically conducting without the need for further chemical treatment. Graphene adsorption at inter‐wire junctions as well as graphene connecting adjacent wires contributes to a marked enhancement in electrical properties. Using our approach, the amount of nanowires needed to produce viable transparent electrodes could be more than 50 times less than the equivalent pristine high density nanowire networks, thus having major commercial implications. Using a laser ablation process, it is shown that the resulting films can be patterned into individual electrode structures, which is a pre‐requisite to touchscreen sensor fabrication.     

Pregnancy outcomes are not improved by administering gonadotropin-releasing hormone at initiation of a 5-day CIDR-Cosynch resynchronization protocol for lactating dairy cows

Using a 5-d controlled internal drug-release (CIDR)-Cosynch resynchronization protocol, the objective of this study was to determine the effect of the initial GnRH injection on pregnancy per artificial insemination (P/AI) to the second artificial insemination in lactating Holstein dairy cows. On 37 ± 3 d (mean ± standard deviation) after the first artificial insemination, and upon nonpregnancy diagnosis (d 0 of the experiment), lactating cows eligible for a second artificial insemination (n = 429) were enrolled in a 5-d CIDR-Cosynch protocol. On d 0, all cows received a CIDR insert and were assigned randomly to receive the initial GnRH injection (GnRH; n = 226) of the protocol or no-GnRH (n = 203). Blood samples were collected from a sub-group of cows (n = 184) on d 0 and analyzed for progesterone (P4) concentration. On d 5, CIDR inserts were removed, and all cows received 1 injection of PGF_2α. On d 6 and 7, cows were observed once daily by employees for tail-chalk removal, and cows detected in estrus on d 6 or 7 received artificial insemination that day (EDAI), and did not receive the final GnRH injection. The remaining cows not detected in estrus by d 8 received GnRH and timed artificial insemination (TAI). Pregnancy status was confirmed by transrectal palpation of uterine contents at 37 ± 3 d (mean ± standard deviation) after the second artificial insemination. Eliminating the initial GnRH injection had no effect on P/AI compared with cows receiving GnRH (27 vs. 21%), respectively. Similarly, method of insemination (EDAI vs. TAI) and its interaction with treatment had no effect on P/AI. Primiparous cows had greater P/AI than multiparous cows (31 vs. 21%). Mean P4 concentrations (n = 184) at the initiation of the protocol did not differ between treatments (4.51 ± 0.35 ng/mL no-GnRH vs. 3.96 ± 0.34 ng/mL of GnRH). When P4 concentrations were categorized as high (≥1 ng/mL) or low (<1 ng/mL), P/AI tended to be greater for high P4 concentrations (n = 136) compared with low (n = 48) P4 concentrations (26 vs. 16%, respectively). No differences were observed in the proportion of cows with high or low P4 between treatments. Collectively, these results provide evidence that eliminating the initial GnRH in a 5-d CIDR-Cosynch resynchronization protocol for lactating dairy cows did not reduce P/AI in this study.     

Enhancing the fraction of grafted polystyrene on silica hybrid nanoparticles

Polymer-grafted inorganic nanoparticles are being developed for a diverse array of applications, ranging from drug delivery to multifunctional composites. In many instances, performance of these core-shell hybrids is limited by relatively broad distributions of size and composition, as well as the presence of impurities, such as unattached polymer chains. Herein, further synthetic improvements, and associated characterization techniques, to enhance the fraction of the grafted polystyrene shell on silica hybrid nanoparticles are discussed. We found that during surface-initiated atom transfer radical polymerization (SI-ATRP) from the silica nanoparticles, thermal self-initiation of styrene produces unattached polymer chains. Size exclusion chromatography afforded a facile approach to quantify the mass of the unattached polymer, and provide a substantial refinement to estimates of chain graft density beyond traditionally-used approaches, such as thermogravimetry. This fraction of unattached polymer is still present even after post-polymerization work-up via precipitation and re-dissolution. Removal necessitates additional procedures, such as high speed centrifugation. Selection of a lower polymerization temperature, in concert with a more reactive Cu complex, significantly reduces the amount of unattached polystyrene impurity. The improved polymerization conditions and post-polymerization purification provide more refined polystyrene-grafted silica nanoparticles to clarify structure-property relationships of these core-shell hybrids.