Effects of upholstery materials on the burning behavior of real‐scale residential upholstered furniture mock‐ups

Fire spread and growth on real‐scale four cushion mock‐ups of residential upholstered furniture (RUF) were investigated with the goal of identifying whether changes in five classes of materials (barrier, flexible polyurethane foam, polyester fiber wrap, upholstery fabric, and sewing thread), referred to as factors, resulted in statistically significant changes in burning behavior. A fractional factorial experimental design plus practical considerations yielded a test matrix with 20 material combinations. Experiments were repeated a minimum of two times. Measurements included fire spread rates derived from video recordings and heat release rates (HRRs). A total of 13 experimental parameters (3 based on the videos and 10 on the HRR results), referred to as responses, characterized the measurements. Statistical analyses based on Main Effects Plots (main effects) and Block Plots (main effects and factor interactions) were used. The results showed that three of the factors resulted in statistically significant effects on varying numbers of the 13 responses. The Barrier and Fabric factors had the strongest main effects with roughly comparable magnitudes. Foam was statistically significant for fewer of the responses and its overall strength was weaker than for Barrier and Fabric. No statistically significant main effects were identified for Wrap or Thread. Multiple two‐term interactions between factors were identified as being statistically significant. The Barrier*Fabric interaction resulted in the highest number of and strongest statistically significant effects. The existence of two‐term interactions means that it will be necessary to consider their effects in approaches designed to predict the burning behavior of RUF.     

Evaluating the Use of Daily Care Notes Software for Older People with Dementia

There has been little research to investigate the impact of software to support the care for older people with dementia care. This article reports the evaluation of software adapted to support one key person-centered task for the care of older residents with dementia – recording and sharing daily care notes. The evaluation on the dementia wing of 1 residential home for over 6 months revealed that use of the software on mobile devices carried by the carers increased the number and volume of daily care notes recorded, but only for the types of content that were already being recorded by carers. Carers reported more advantages that resulted from daily care notes once in digital form than from the documenting task, as well as barriers to the use of mobile digital software to record daily care notes.     

Solution for M/G/1 queues

M/G/1 type queueing systems are frequently found in the performance evaluation of communication systems. The authors develop a new solution method for these queues: their results are an alternative to both standard forms of exact analysis, and to diffusion approximations, while offering comparable computational complexity to the latter     

Buffering packetised data: an examination of the crossover effect

Buffer analysis has traditionally relied heavily on the use of traffic models with short range (exponentially decaying) autocorrelation, e.g. Poisson and Markov modulated Poisson processes. Recent literature has suggested the presence of traffic with slowly (hyperbolically) decaying autocorrelation functions; these sources collectively and individually seem to be exhibiting the phenomenon of long range dependence (LRD). Furthermore, it has been claimed that this sort of traffic may exhibit behaviour, when buffered, that is advantageous in that a smaller buffer may be required than would be the case with non-LRD traffic. This phenomenon has been named the crossover effect, and the authors quantify its relevance to ATM networking, using simulation studies of a homogenous mix of chaotic sources. These show that there is a crossover effect, but the key finding is that this effect is much nearer to a buffer length of zero than was predicted by previous theoretical studies, actually occurring at a value so low that it has no practical significance     

Multifunctional hydrogels that promote osteogenic hMSC differentiation through stimulation and sequestering of BMP2

The extracellular environment controls many cellular activities thereby linking external material cues to internal cell function. By better understanding these processes, synthetic extracellular material niches can be tailored to present cells with highly regulated physical and/or chemical cues that promote or suppress selected cell functions. Here, poly(ethylene glycol) (PEG) hydrogels were functionalized with fluvastatin-releasing grafts and growth factor binding heparin domains to enable the dynamic exchange of information between the material and cells from the outside-in and inside-out (i.e., bidirectional signaling). By incorporating a fluvastatin-releasing graft and carefully controlling the dose and temporal release, materials were designed to promote bone morphogenic protein (BMP2) and alkaline phosphatase (ALP) production by human mesenchymal stem cells (hMSCs). When the release of fluvastatin was controlled to occur over 2 weeks, BMP2 and ALP production was increased 2.2-fold and 1.7-fold, respectively, at day 28 compared to hMSCs cultured in the absence of fluvastatin. By introducing a heparin functionality into the gel to sequester and localize the hMSC-produced BMP2, the osteogenic differentiation of hMSCs was further augmented over fluvastatin delivery alone. Osteopontin and core binding factor α1 gene expression was 6-fold and 4-fold greater for hMSCs exposed to fluvastatin in the presence of the heparin functionalities, respectively. These results demonstrate how multifunctional gels that interact with cells in a bidirectional manner can efficiently promote selected cell functions, such as the osteogenic differentiation of hMSCs.     

A New Approach to Abstract Syntax with Variable Binding

The permutation model of set theory with atoms (FM-sets), devised by Fraenkel and Mostowski in the 1930s, supports notions of ‘name-abstraction’ and ‘fresh name’ that provide a new way to represent, compute with, and reason about the syntax of formal systems involving variable-binding operations. Inductively defined FM-sets involving the name-abstraction set former (together with Cartesian product and disjoint union) can correctly encode syntax modulo renaming of bound variables. In this way, the standard theory of algebraic data types can be extended to encompass signatures involving binding operators. In particular, there is an associated notion of structural recursion for defining syntax-manipulating functions (such as capture avoiding substitution, set of free variables, etc.) and a notion of proof by structural induction, both of which remain pleasingly close to informal practice in computer science. Received October 2000 / Accepted in revised form April 2001     

A review of the effects of water transfers in the La Grande Hydroelectric Complex (Québec,Canada)

Construction of the La Grande Complex in Eastern Canada called for complete or partial diversion of six rivers, the mean annual discharge of which varied from 60 to 1600 m³ s^?1, and the transfer of water from two adjoining watersheds (1586m³ s^?1) into La Grande Rivière. Three of these rivers with reduced flow, Eastmain (from 700 to 95m³ s^?1), Opinaca (from 260 to 35m³ s^?1), and Caniapiscau (from 1708 to 960m³ s^?1) and the waterways with increased flows, Boyd-Sakami (from 1 to 811m³ s^?1) and La Grande Rivière (from 1760 to 3400m³ s^?1) were intensively monitored from 1978 to 1988, while the others were surveyed sporadically. Very few modifications were observed, compared to previous conditions, in banks stability, water quality, and aquatic fauna of the affected rivers: those which appeared can be explained by the water level fluctuations, the water quality of the tributaries of the residual drainage basin, and/or by the direct influence of the reservoirs. In James Bay, the areal extent of the Eastmain River and La Grand Rivière plumes varied with discharge in an exponential relation, mostly under ice cover; resources from the coastal environment had not yet undergone any major changes. Because of the very small population dwelling in the area, less than 3000 inhabitants, modifications in the hydrological regime of these rivers did cause relatively few impacts, the main being greater banks instability in specific locations, reduction of the thickness and ice cover on La Grande Rivière, enhancement of navigation constraints on Eastmain River, and higher mercury levels in fish related to operation of the reservoirs.     

Synthesis and structure-activity study of quaternary ammonium functionalized beta-cyclodextrin-carboxymethylcellulose polymers

Carboxymethylcellulose (CMC) and beta-cyclodextrin (beta-CD)-based polymers functionalized with two types of quaternary ammonium compounds (QACs), the alkaquat DMB-451 (N-alkyl (50% C14, 40% C12, 10% C10) dimethylbenzylammonium chloride) (DMD-451) named polymer DMB-451, and FMB 1210-8 (a blend of 32 w% N-alkyl (50% C14, 40% C12, 10% C10) dimethylbenzylammonium chloride and 48 w% of didecyldimethylammonium chloride) named polymer FMB 1210-8, were synthethized and characterized by Fourier transform infrared spectroscopy. The antimicrobial activities of these polymers against Eschericia coli were also evaluated at 25 degrees C in wastewater. The results have indicated that the polymer FMB 1210-8 possesses a high-affinity binding with bacterial cells that induces a rapid disinfection process. Moreover, in the same experimental conditions of disinfection (mixture of 1.0 g of polymer and 100 mL of wastewater), the polymer FMB 1210-8 has a higher antimicrobial efficiency (99.90%) than polymer DMB-451 (92.8%). This phenomenon might be associated to a stronger interaction with bacterial cells due to stronger binding affinity for E. coli cells and greater killing efficiency of the C10 alkyl chains QAC of polymer FMB 1210-8 to disrupt the bacterial cell membrane as compared to N-alkyl (50% C14, 40% C12, 10% C10) dimethylbenzylammonium chloride. Together, these results suggest that the polymer FMB 1210-8 could constitute a good disinfectant against Escherichia coli, which could be advantageously used in wastewater treatments due to the low toxicity of beta-CD and CMC, and moderated toxicity of FMB 1210-8 to human and environment.     

Critical thinking in E-learning environments

One of the primary aims of higher education in today’s information technology enabled classroom is to make students more active in the learning process. The intended outcome of this increased IT-facilitated student engagement is to foster important skills such as critical thinking used in both academia and workplace environments. Critical thinking (CT) skills entails the ability(ies) of mental processes of discernment, analysis and evaluation to achieve a logical understanding. Critical thinking in the classroom as well as in the workplace is a central theme; however, with the dramatic increase of IT usage the mechanisms by which critical thinking is fostered and used has changed. This article presents the work and results of critical thinking in a virtual learning environment. We therefore present a web-based course and we assess in which parts of the course, and to what extent, critical thinking was perceived to occur. The course contained two categories of learning modules namely resources and interactive components. Critical thinking was measured subjectively using the ART scale. Results indicate the significance of “interactivity” in what students perceived to be critical-thinking-oriented versus online material as a resource. Results and opportunities that virtual environments present to foster critical thinking are discussed.     

The changing face of bullying: An empirical comparison between traditional and internet bullying and victimization

Electronic aggression, or cyberbullying, is a relatively new phenomenon. As such, consistency in how the construct is defined and operationalized has not yet been achieved, inhibiting a thorough understanding of the construct and how it relates to developmental outcomes. In a series of two studies, exploratory and confirmatory factor analyses (EFAs and CFAs respectively) were used to examine whether electronic aggression can be measured using items similar to that used for measuring traditional bullying, and whether adolescents respond to questions about electronic aggression in the same way they do for traditional bullying. For Study I (n = 17 551; 49% female), adolescents in grades 8-12 were asked to what extent they had experience with physical, verbal, social, and cyberbullying as a bully and victim. EFA and CFA results revealed that adolescents distinguished between the roles they play (bully, victim) in a bullying situation but not forms of bullying (physical, verbal, social, cyber). To examine this further, Study II (n = 733; 62% female), asked adolescents between the ages of 11 and 18 to respond to questions about their experience sending (bully), receiving (victim), and/or seeing (witness) specific online aggressive acts. EFA and CFA results revealed that adolescents did not differentiate between bullies, victims, and witnesses; rather, they made distinctions among the methods used for the aggressive act (i.e. sending mean messages or posting embarrassing pictures). In general, it appears that adolescents differentiated themselves as individuals who participated in specific mode of online aggression, rather than as individuals who played a particular role in online aggression. This distinction is discussed in terms of policy and educational implications.