Use of the Retarded Solution-Reprecipitation Process to Attain a Higher Initial Permeability in MnZn Ferrites

We investigated the effect of various amounts of liquid phase on microstructure development during sintering and the resulting magnetic permeability of MnZn ferrite (MZF) samples. Our results revealed that the microstructure and the final magnetic permeability depend on the thickness of the liquid-phase film during sintering. The solution-reprecipitation (S-R) process, which is associated with an intensive microstructure development in MZF, starts when a continuous liquid-phase film of critical thickness δ_o, which wets the MZF grains, is formed. The solid-state sintering that takes place before the formation of the continuous liquid-phase film is essential for the final microstructure of MZF.     

Application of substituted N-arylpyrroles in the corrosion protection of aluminium in hydrochloric acid

The inhibiting action of N-arylpyrroles on aluminium in 0.17 mol dm^–3 hydrochloric acid solution, in the temperature range 20–60 °C, was studied using potentiodynamic and electrochemical impedence spectroscopy techniques. The inhibiting efficiency of both investigated compounds 1-(2-fluorophenyl)-2,5-dimethylpyrrole (compound A) and 1-(2-fluorophenyl)-2,5-dimethylpyrrole-3-carbaldehyde (compound B) slightly increases with increasing temperature of the corrosive solution. Inhibitor adsorption on the elecrode surface decreases the apparent activation energy of the hydrogen evolution reaction. Compound A follows the Temkin adsorption isotherm, while its carbaldehyde derivative follows the Langmuir isotherm. The results of the apparent energy of activation and the standard free energy of adsorption point to stronger chemisorption of the compound A. However, due to additional condensation of molecules with carbaldehyde groups on the electrode surface, the carbaldehyde derivative exhibits even better inhibiting efficiency than compound A. The kinetic corrosion parameters, analysed in terms of the impedance data, show a satisfactory agreement with those obtained by the potentiodynamic method.     

Passivation and corrosion behaviours of cobalt and cobalt-chromium-molybdenum alloy

Passivation and corrosion behaviour of the cobalt and cobalt-base alloy Co30Cr6Mo was studied in a simulated physiological solution containing chloride and bicarbonate ions and with pH of 6.8. The oxido-reduction processes included solid state transformations occurring at the cobalt/electrolyte interface are interpreted using theories of surface electrochemistry. The dissolution of cobalt is significantly suppressed by alloying it with chromium and molybdenum, since the alloy exhibited “chromium like” passivity. The structural and protective properties of passive oxide films formed spontaneously at the open circuit potential or during the anodic polarization were studied using electrochemical impedance spectroscopy in the wide frequency range.     

Predictive value of biological markers in etiopathogenesis of juvenile diabetes--reviewing the role of insulin antibodies

The lack of complete concordance for diseases in monozygotic twins prevents application of genetic markers for a thorough identification of the subjects who will develop the type I diabetes. Furthermore, the impact of the environmental factors precipitating beta cells destruction in genetically sensitive subjects has not been completely enlightened yet. The identification of high risk markers for the development of diabetes is aimed at detection of the early immune response activation markers. Islet cell antibodies are the most valuable markers, whose presence can be discovered even up to 7-8 years prior to the onset of symptoms. They are found in 50-80% of the newly discovered insulin-dependent diabetics. Their prevalence in the general population is 0.5-2%. These are commonly concomitant with insulin antibodies, found in 20-40% of the newly discovered diabetics, as reported in the literature. In our circumstances it was possible to determine the insulin antibodies only. We have concluded that they appear in 13.6% of children with a newly discovered diabetes, presenting a significant marker for predicting the course of the disease.     

On minimum cost isolated failure immune networks

A telecommunications network is isolated failure immune (IFI) if and only if communication between operative sites can be completed as long as network failures are isolated. It is known that the class of minimal IFI networks is equivalent to the class of spanning 2-trees. To the best of our knowledge, this work is the first computational study dealing with the construction of a minimum cost IFI network. The problem is known to be NP-complete. We develop a tabu search based heuristic for solving the minimum cost spanning 2-tree (MCS2T) problem. The complex structure of 2-trees makes the tabu search heuristic highly dependent on the starting solution. We develop four heuristic algorithms to obtain diversified good starting solutions. They are: completion of a 2-tree from a spanning tree, two greedy approaches, and a method based on the recursive definition of a 2-tree. We also formulate an integer programming problem (IP) whose objective function value is a lower bound to the MCS2T problem. We solve the IP by developing a constraint generation scheme. The algorithms were tested on complete random graphs with Euclidean distances and on two real data sets (Civil Aeronautics Board) with instances of 10, 15, 20 and 25 nodes. As a result of this research for small problems (10 and 15 nodes), the heuristic solutions are on average within 0.8% from the optimal solution and for large problems (20 and 25 nodes), the average error is less than 2.8%.     

A quantitative analysis of the unit verification perspective on fault distributions in complex software systems: an operational replication

Unit verification, including software inspections and unit tests, is usually the first code verification phase in the software development process. However, principles of unit verification are weakly explored, mostly due to the lack of data, since unit verification data are rarely systematically collected and only a few studies have been published with such data from industry. Therefore, we explore the theory of fault distributions, originating in the quantitative analysis by Fenton and Ohlsson, in the weakly explored context of unit verification in large-scale software development. We conduct a quantitative case study on a sequence of four development projects on consecutive releases of the same complex software product line system for telecommunication exchanges. We replicate the operationalization from earlier studies, analyzed hypotheses related to the Pareto principle of fault distribution, persistence of faults, effects of module size, and quality in terms of fault densities, however, now from the perspective of unit verification. The patterns in unit verification results resemble those of later verification phases, e.g., regarding the Pareto principle, and may thus be used for prediction and planning purposes. Using unit verification results as predictors may improve the quality and efficiency of software verification.     

Simple and efficient ion imprinted polymer for recovery of uranium from environmental samples

Ion imprinted polymer material (IIP) was prepared by forming ternary complexes of uranyl imprint ion with 1-(prop-2-en-1-yl)-4-(pyridin-2-ylmethyl)piperazine and methacrylic acid followed by thermal copolymerization with ethylene glycol dimethacrylate as the cross-linking monomer in the presence of 1,1'-azobis(cyclohexanecarbonitrile) initiator and 2-methoxy ethanol porogenic solvent. HCl solution (5 mol/L) was used to leach out the uranyl template ion from the IIP particles. Similarly, the control polymer (CP) material was also prepared exactly under the same conditions as the IIP but without the uranyl ion template. Various parameters such as solution pH, initial concentration, aqueous phase volume, sorbent dosage, contact time and leaching solution volumes were investigated. SEM, IR and BET-surface area and pore size analysis were used for the characterization of IIP and CP materials. The extraction efficiency of the IIP and CP was compared using a batch and SPE mode of extraction. The optimal pH for quantitative removal is 4.0-8.0, sorbent amount is 20 mg, contact time is 20 min and the retention capacity is 120 mg of uranyl ion per g of IIP. The IIP prepared demonstrated superior selectivity towards coexisting cations and therefore it can be used for selective removal of uranium from complex matrices.     

A novel split-and-merge algorithm for hierarchical clustering of Gaussian mixture models

The paper presents a novel split-and-merge algorithm for hierarchical clustering of Gaussian mixture models, which tends to improve on the local optimal solution determined by the initial constellation. It is initialized by local optimal parameters obtained by using a baseline approach similar to k-means, and it tends to approach more closely to the global optimum of the target clustering function, by iteratively splitting and merging the clusters of Gaussian components obtained as the output of the baseline algorithm. The algorithm is further improved by introducing model selection in order to obtain the best possible trade-off between recognition accuracy and computational load in a Gaussian selection task applied within an actual recognition system. The proposed method is tested both on artificial data and in the framework of Gaussian selection performed within a real continuous speech recognition system, and in both cases an improvement over the baseline method has been observed.