Effect of temperature on the strength and conductivity of a deformation processed Cu-20%Fe composite

The high temperature (22–600 °C) properties were evaluated for a Cu-20%Fe composite deformation processed from a powder metallurgy compact. The ultimate tensile strengths decreased with increasing temperature but were appreciably better than those of similarly processed Cu at temperatures up to 450 °C. At 600 °C, the strength of Cu-20%Fe was only slightly better than that of Cu as a result of the pronounced coarsening of the Fe filaments. However, at temperatures of 300 and 450 °C, the strength of Cu-20%Fe is about seven and six times greater, respectively, than that of Cu, as compared to about a two fold advantage at room temperature. Therefore, Cu-20%Fe composites made by deformation processing of powder metallurgy compacts have mechanical properties much superior to those of similarly processed Cu at room temperature and at temperatures up to 450 °C. The pronounced decrease in electrical conductivity of deformation processed Cu-20%Fe as compared to Cu is attributed to the appreciable dissolution of Fe into the Cu matrix which occurred during the fabrication of the starting compacts where temperatures up to 675 °C were used. While the powder metallurgy compacts used for the starting material for deformation processing in this study did not lead to a high conductivity composite, the powder metallurgy approach should still be a viable one if processing temperatures can be reduced further to prevent the dissolution of Fe into the Cu matrix.     

Effect of oestradiol on ovarian oxytocin secretion rate and luteolysis in the ewe after ovarian auto-transplantation

The release of ovarian oxytocin and uterine prostaglandin (PG)F2alpha in response to an oestradiol stimulus was investigated. On Day 15 post-oestrus, ten ewes with ovarian auto-transplants (n=5 per group) received an intra-muscular injection of either oestradiol benzoate (50 microg) or vehicle. Blood samples were collected from the ovarian and jugular veins at 30 and 0 min before, and at 15-min intervals up to 540 min after, injection. The secretion rate of ovarian progesterone remained elevated in four of five treated ewes and in all control ewes, indicating the presence of a functional corpus luteum. Peripheral oestradiol concentrations were significantly (P < 0.001) higher in treated than in control ewes. The number of ewes that released pulses of ovarian oxytocin > or =240 min following oestradiol benzoate injection was significantly (P < 0 05) greater than that in control ewes. Mean amplitude and area under both ovarian-vein oxytocin and jugular-vein 15 keto-13,14 dihydro prostaglandin F2alpha (PGFM) pulses were significantly increased in the treated ewes. These findings demonstrate that the administration of exogenous oestrogen provides a positive stimulus for the release of ovarian oxytocin and uterine PGF2alpha in the ovarian auto-transplanted ewe.     

Some aspects of the analysis of coal by X-ray fluorescence spectroscopy

Bituminous coal samples from 84 distinct sources were analysed by conventional British Standards (BS) methods for phosphorus, sulphur, chlorine, ash and the ash-forming elements (calcium, silicon, aluminium, iron, sodium, magnesium, potassium, titanium and manganese). In most cases four determinations were made per element per source. Samples were crushed to ?212 μm (72 BS mesh) and pressed into aluminium cups at 20 t in^?2 (309 MPa) without binder or backing. Two pellets from each sample were analysed by wave-length dispersive X-ray fluorescence techniques, using a spectrometer equipped with a rhodium rube; the X-ray count took 60 s. The X-ray results were calibrated against the conventional results using multiple regression. The accuracy obtained was comparable with routine ‘wet chemical’ techniques. The X-ray technique is suitable for the routine determination of large numbers of samples.     

Development of a high‐resolution RGBW flexible display using a white organic light‐emitting diode with microcavity structure and that of a side‐roll touch panel

In this study, white organic electroluminescent devices with microcavity structures were developed. A flexible high‐resolution active‐matrix organic light‐emitting diode display with low power consumption using red, green, blue, and white sub‐pixels formed by a color‐filter method was fabricated. In addition, a side‐roll touch display was developed in combination with a capacitive flexible touch screen.     

Kinetics of Thermal Dehydroxylation and Carbonation of Magnesium Hydroxide

The kinetics of simultaneous dehydroxylation and carbonation of precipitated Mg(OH)₂ were studied using isothermal and nonisothermal thermogravimetric analyses. Specimens were analyzed using X-ray diffraction, transmission electron microscopy, and through measurements of the volume of carbon dioxide evolved in a subsequent reaction with hydrochloric acid. From 275° to 475°C, the kinetics of isothermal dehydroxylation in helium were best fit to a contracting-sphere model, yielding an activation energy of 146 kJ/mol, which was greater than values reported in the literature for isothermal dehydroxylation under vacuum (53–126 kJ/mol). The carbonation kinetics were complicated by the fact that dehydroxylation occurred simultaneously. The overall kinetics also could be fit to a contracting-sphere model, yielding a net activation energy of 304 kJ/mol. The most rapid carbonation kinetics occurred near 375°C. At this temperature, Mg(OH)₂ underwent rapid dehydroxylation and subsequent phase transformation, whereas thermodynamics favored the formation of carbonate. During carbonation, MgCO₃ precipitated on the surface of disrupted Mg(OH)₂ crystals acting as a kinetic barrier to both the outward diffusion of H₂O and the inward diffusion of CO₂.     

Repeatedly foldable AMOLED display

In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10^?6 g/m²?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three.     

The Effect of Subfilter-Scale Physics on Regularization Models

The subfilter-scale (SFS) physics of regularization models are investigated to understand the regularizations’ performance as SFS models. Suppression of spectrally local SFS interactions and conservation of small-scale circulation in the Lagrangian-averaged Navier-Stokes α-model (LANS-α) is found to lead to the formation of rigid bodies. These contaminate the superfilter-scale energy spectrum with a scaling that approaches k ⁺¹ as the SFS spectra is resolved. The Clark-α and Leray-α models, truncations of LANS-α, do not conserve small-scale circulation and do not develop rigid bodies. LANS-α, however, is closest to Navier-Stokes in intermittency properties. All three models are found to be stable at high Reynolds number. Differences between L ² and H ¹ norm models are clarified. For magnetohydrodynamics (MHD), the presence of the Lorentz force as a source (or sink) for circulation and as a facilitator of both spectrally nonlocal large to small scale interactions as well as local SFS interactions prevents the formation of rigid bodies in Lagrangian-averaged MHD (LAMHD-α). LAMHD-α performs well as a predictor of superfilter-scale energy spectra and of intermittent current sheets at high Reynolds numbers. It may prove generally applicable as a MHD-LES.     

Unsupervised Extraction of Structural Information from High Dimensional Visual Data

We present three unsupervised artificial neural networks for the extraction of structural information from visual data. The ability of each network to represent structured knowledge in a manner easily accessible to human interpretation is illustrated using artificial visual data. These networks are used to collectively demonstrate a variety of unsupervised methods for identifying features in visual data and the structural representation of these features in terms of orientation, temporal and topographical ordering, and stereo disparity.