Finite sample properties of estimators of spatial autoregressive models with autoregressive disturbances

The article investigates the finite sample properties of estimators for spatial autoregressive models where the disturbance terms may follow a spatial autoregressive process. In particular we investigate the finite sample behavior of the feasible generalized spatial two-stage least squares (FGS2SLS) estimator introduced by Kelejian and Prucha (1998), the maximum likelihood (ML) estimator, as well as that of several other estimators. We find that the FGS2SLS estimator is virtually as efficient as the ML estimator. This is important because the ML estimator is computationally burdensome, and may even be forbidding in large samples, while the FGS2SLS estimator remains computationally feasible in large samples. Received: 20 January 2001 / Accepted: 31 August 2001     

Electrical properties of N2O/NH3 plasma grownoxynitride on strained-Si

Growth of ultrathin (<100 Å) oxynitride on strained-Si using microwave N₂O and NH₃ plasma is reported. X-ray photoelectron spectroscopy (XPS) results indicate a nitrogen-rich layer at the strained-Si/SiO₂ interface. The electrical properties of oxynitrides have been characterized using a metal-insulator-semiconductor (MIS) structure. A moderately low value of insulator charge density (6.1×10¹⁰ cm^-2) has been obtained for NH₃ plasma treated N₂O oxide sample. Nitrided oxide shows a larger breakdown voltage and an improved charge trapping properties under Fowler-Nordheim (F-N) constant current stress     

Bending and free vibration analysis of shear deformable laminated composite beams by finite element method

In the present investigation a higher-order shear deformation theory and the conventional first-order theory are used to develop a finite element method to analyse accurately the bending and free vibration behaviour of laminated composite beams, using nine-noded isoparametric elements. The higher-order theory assumes all the displacement components, u, v and w, which contain variation up to a cubic power of z. The effects of various parameters such as fibre orientation, stacking sequence, span-to-thickness ratio and support condition on the non-dimensionalised deflections, stresses and fundamental frequencies are investigated. Cases where only the higher-order theory is likely to yield accurate results are highlighted.     

Furnace grown gate oxynitride using nitric oxide (NO)

Gate oxynitride was grown in NO for the first time. This approach can provide a tight N accumulation near the Si/SiO₂ interface. Much lower thermal budget is required for an NO process than for an N₂O process to produce an oxynitride with useful properties. Submicron MOSFET's with NO oxynitride showed superior current drive characteristics and comparable hot carrier immunity to those with N₂O oxynitride     

The polar cluster like behavior in Ti substituted BaZrO3 ceramics

In this paper we report the evolution of the polar cluster like behavior with the incorporation of Ti⁴⁺ ion in BaZrO₃ Ceramics. Dielectric behavior of BaZr_xTi_(1−x)O₃ (x = 1.00, 0.95, 0.90, 0.85) ceramics is studied in the temperature range from 300 to 30 K. Polar cluster like behavior becomes more prominent with the increase in content of Ti⁴⁺ ion. The dielectric relaxation is analyzed by Vogel–Fulcher relation and Arrhenius law. Frequency dependence of dielectric constant and low loss tangent of these materials can be useful for the potential applications at low temperature.     

Evaluation of improvement of physical and mechanical properties of bamboo fibers due to alkali treatment

Bamboo strips treated with caustic solutions of different concentrations, e.g., 5%, 10%, 15%, 20%, 25%, and 50%, were subjected to mechanical testing giving stresses on tensile strength, percent elongation at break, flexural strength, flexural modulus, and toughness. The change in average density was ?15%, and the weight loss value shows a maximum of 21.94% at 50% alkali treatment. The mechanical properties of bamboo strips increase steadily with increasing concentration of caustic soda, showing a comparable increased value at 15 and 20%, and then exhibiting a gradual fall. The percent elongation at break corroborates these observations showing a continuous decreasing trend. The properties under investigation exhibit a clear transition in between 15 and 20% alkali concentration. The morphology of strips was studied by scanning electron microscope and polarizing light microscope. The crystal structure of both untreated and treated strips was compared by XRD analysis. In both cases, the breakdown of the crystal structures of the cellulose fibers and the recrystallization or reorientation of the degraded chains that are devoid of hemicellulose are quite apparent. However, at a very high concentration (to the extent of 25%) the breakdown of structure predominates much more over the reorientation or recrystallization. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Finite element computation of the strain energy release rate for kinking of a crack

The approximate energy release rate for a crack which extends, or kinks, away from its original direction has been computed by finite element analysis using three different methods: stiffness derivative procedure, J integral method and crack closure integral procedure. A case study is presented to compare the computational accuracies. It suggests that a satisfactory approximation can be obtained provided that the ratio of kink length to original crack length, l(0)/a0.04, despite the interaction of the crack tip and knee stress singularities.

---

Résumé En utilisant trois méthodes différentes (dérivation de la raideur, intégrale J et intégrale de fermeture de la fissure), on a calculé par éléments finis la vitesse approchée de relaxation de l'energie dans le cas d'une fissure qui diverge ou qui part en arborescence par rapport à sa direction initiale.On présente une étude de cas de manière à comparer les précisions respectives obtenus dans les calculs.Cette étude suggère qu'une approximation satisfaisante peut être obtenue, pour autant que le rapport de la longueur déviée à la longueur initiale de la fissure soit inférieure ou égale à 0,04, en dépit de l'interaction entre l'extrémité de la fissure et la singularité de la contrainte.

     

Prediction of mode I fracture toughness of unidirectional fibre composites with arbitrary crack fibre orientation from its lowest or matrix fracture tougness

Corrigendum

Prediction of mode I fracture toughness of unidirectional fibre composites with arbitrary crack fibre orientation from its lowest or matrix fracture tougnessby P.K. Sarkar and S.K. Maiti