Finite sample properties of estimators of spatial autoregressive models with autoregressive disturbances

The article investigates the finite sample properties of estimators for spatial autoregressive models where the disturbance terms may follow a spatial autoregressive process. In particular we investigate the finite sample behavior of the feasible generalized spatial two-stage least squares (FGS2SLS) estimator introduced by Kelejian and Prucha (1998), the maximum likelihood (ML) estimator, as well as that of several other estimators. We find that the FGS2SLS estimator is virtually as efficient as the ML estimator. This is important because the ML estimator is computationally burdensome, and may even be forbidding in large samples, while the FGS2SLS estimator remains computationally feasible in large samples. Received: 20 January 2001 / Accepted: 31 August 2001     

Evaluation of improvement of physical and mechanical properties of bamboo fibers due to alkali treatment

Bamboo strips treated with caustic solutions of different concentrations, e.g., 5%, 10%, 15%, 20%, 25%, and 50%, were subjected to mechanical testing giving stresses on tensile strength, percent elongation at break, flexural strength, flexural modulus, and toughness. The change in average density was ?15%, and the weight loss value shows a maximum of 21.94% at 50% alkali treatment. The mechanical properties of bamboo strips increase steadily with increasing concentration of caustic soda, showing a comparable increased value at 15 and 20%, and then exhibiting a gradual fall. The percent elongation at break corroborates these observations showing a continuous decreasing trend. The properties under investigation exhibit a clear transition in between 15 and 20% alkali concentration. The morphology of strips was studied by scanning electron microscope and polarizing light microscope. The crystal structure of both untreated and treated strips was compared by XRD analysis. In both cases, the breakdown of the crystal structures of the cellulose fibers and the recrystallization or reorientation of the degraded chains that are devoid of hemicellulose are quite apparent. However, at a very high concentration (to the extent of 25%) the breakdown of structure predominates much more over the reorientation or recrystallization. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Chitosan-based magnetic molecularly imprinted polymer: synthesis and application in selective recognition of tricyclazole from rice and water samples

A tricyclazole selective chitosan/Fe₃O₄ magnetic molecularly imprinted polymer (MMIP) was synthesized using non-covalent binding polymerization involving methacrylic acid (MAA) as functional monomer, divinylbenzene (DVB-80) as crosslinker, 2,2'-azobisisobutyronitrile as initiator, acetonitrile/toluene (75:25, v/v) as porogenic solvent and tricyclazole as template. Surface morphology and magnetic characterization of the prepared imprinted and non-imprinted polymers were done using scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectrometry and vibrating sample magnetometry, respectively. The adsorption kinetic data fitted best in pseudo-second-order model. The adsorption equilibrium was achieved in 30 min and the maximum binding capacity was 4579.9 µg/g. The Freundlich isotherm model was found suitable for explaining the binding isotherm data (R² > 0.99). Negative values of thermodynamic parameters ∆G (Gibb’s free energy), ∆H (enthalpy), and ∆S (entropy) revealed exothermic and spontaneous nature of adsorption processes. It also revealed decreased randomness at the solid–liquid interface during sorption. The scatchard plot analysis suggested heterogeneity of binding sites on MMIPs. The molecular recognition selectivity of MMIPs towards tricyclazole was much higher, as compared to its structural analogues, tebuconazole (α = 28.58) and hexaconazole (α = 37.16). The MMIPs were successfully applied to separate and enrich tricyclazole from fortified samples of rice and water, with a recovery percentage of 89.4% and 90.9%, respectively. These reusable imprinted polymers possessing high selectivity and specificity can be utilized as an adsorbent for solid-phase extraction in sample preparation for tricyclazole residue analysis in complex environmental matrices.

     

Studies on engineering properties of PVC–PMMA semi‐interpenetrating polymer networks

Semi1 and semi2 interpenetrating polymer networks (IPNs) of PVC and in situ formed PMMA have been synthesized using diallyl phthalate and ethylene glycol dimethacrylate as the crosslinkers of PVC and PMMA, respectively. These two types of IPNs have been compared w.r.t their physical, mechanical, and thermal properties and an endeavor has been made to find a correlation of these properties with the morphology generated in these systems. The semi1 IPNs displayed a decrease in their mechanical parameters and the physical properties as well, while in contrast, the semi2 IPNs exhibited a marginal increase in the corresponding values after an initial drop upto about 15% of crosslinked PMMA incorporation when compared to the crosslinked PVC in the case of semi1 IPN and linear PVC in the case of semi2 IPN. The various samples of semi1 and semi2 IPNs showed a two‐stage degradation typical of PVC, while confirming the increased stability with the samples having higher percentages of PMMA. The influence of crosslinking of the major matrix in semi1 IPN was almost counterbalanced by the influence of crosslinking in the dispersed PMMA phase in the case of semi2 IPN. The softening characteristics as detected by the extent of penetration of the probe, as has been detected by thermomechanical analysis, are in conformity with their mechanicals. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1725–1735, 2005     

Development,optimization, and characterization of a novel tea tree oil nanogel using response surface methodology

Purpose: To develop and optimize nanoemulsion (NE)-based emulgel (EG) formulation as a potential vehicle for topical delivery of tea tree oil (TTO).

Methodology: Central composite design was adopted for optimizing the processing conditions for NE preparation by high energy emulsification method viz. surfactant concentration, co-surfactant concentration, and stirring speed. The optimized NE was developed into emulgel (EG) using pH sensitive polymer Carbopol 940 and triethanolamine as alkalizer. The prepared EG was evaluated for its pH, viscosity, and texture parameters, ex vivo permeation at 37?°C and stability. Antimicrobial evaluation of EG in comparison to conventional gel and pure TTO was also carried out against selected microbial strains.

Results and discussion: Optimized NE had particle size and zeta potential of 16.23?±?0.411?nm and 36.11?±?1.234?mV, respectively. TEM analysis revealed the spherical shape of droplets. The pH of EG (5.57?±?0.05?) was found to be in accordance with the range of human skin pH. EG also illustrated efficient permeation (79.58?μL/cm²) and flux value (J_SS) of 7.96?μL cm²/h through skin in 10?h. Viscosity and texture parameters, firmness (9.3?±?0.08?g), spreadability (2.26?±?0.06?mJ), extrudability (61.6?±?0.05?mJ), and adhesiveness (8.66?±?0.08?g) depict its suitability for topical application. Antimicrobial evaluation of EG with same amount of TTO as conventional gel revealed broader zones of growth inhibitions against all the selected microbial strains. Moreover, EG was also found to be nonirritant (PII 0.0833). These parameters were consistent over 90 d.

Conclusion: TTO EG turned out to be a promising vehicle for the topical delivery of TTO with enhanced therapeutic efficacy.     

Impact of network effects and diffusion channels on home computer adoption

Researchers have identified network effects as one of the major drivers for the adoption and diffusion of household technologies. However, the mechanisms and social contexts through which network effects induce technology adoption are unclear. In this paper, we investigate the adoption of household computers using the dataset from the 1989-2003 Computer and Internet Supplement to the Current Population Surveys (CPS). We argue that social influence and learning play a dominant role in inducing the adoption of home computers, and workplaces and schools are important channels through which network effects take place. We find that recent adopters have a stronger impact than distant adopters on future computer adoptions. When the adoption rate is low, channels play a more important role, but their effects diminish as the adoption rate grows. We also find that diffusion channels are more effective for first-time adoption than for repeat purchases. Overall, our study provides important theoretical, policy, and managerial implications.     

Finding a minimal cover for binary images: An optimal parallel algorithm

Given a black-and-white image, represented by an array of n × n binary-valued pixels, we wish to cover the black pixels with aminimal set of (possibly overlapping) maximal squares. It was recently shown that obtaining aminimum square cover for a polygonal binary image with holes is NP-hard. We derive an optimal parallel algorithm for theminimal square cover problem, which for any desired computation timeT in [logn,n] runs on an EREW-PRAM with (n/T) processors. The cornerstone of our algorithm is a novel data structure, the cover graph, which compactly represents the covering relationships between the maximal squares of the image. The size of the cover graph is linear in the number of pixels. This algorithm has applications to problems in VLSI mask generation, incremental update of raster displays, and image compression.The research reported here forms part of the author's doctoral dissertion, submitted to Cornell University in May 1989. This work was partially supported by NSF Grant DC1-86-02256, IBM Agreement 12060043, and ONR Contract N00014-83-K-0640. A preliminary version of this paper was presented at the 26th Annual Allerton Conference on Communications, Control, and Computing, Monticello, IL, September 28–30, 1988.     

Finding a minimal cover for binary images: An optimal parallel algorithm

Given a black-and-white image, represented by an array of √n × √n binary-valued pixels, we wish to cover the black pixels with aminimal set of (possibly overlapping) maximal squares. It was recently shown that obtaining aminimum square cover for a polygonal binary image with holes is NP-hard. We derive an optimal parallel algorithm for theminimal square cover problem, which for any desired computation timeT in [logn,n] runs on an EREW-PRAM with (n/T) processors. The cornerstone of our algorithm is a novel data structure, the cover graph, which compactly represents the covering relationships between the maximal squares of the image. The size of the cover graph is linear in the number of pixels. This algorithm has applications to problems in VLSI mask generation, incremental update of raster displays, and image compression.     

A comparative study of SiAlON ceramics

Two different varieties of Si₃N₄ powders were used to prepare SiAlON ceramics. 100% β-Si₃N₄ was used from refractory grade powders (B1) and another purer 98% α-Si₃N₄ (50A) powder was used to prepare the SiAlON samples. Since SiC + SiAlON composites reportedly perform better, batches were prepared with 15% SiC addition to the refractory powders (B1) and 17.5% SiC was added to the other SiAlON composition (50A). The samples were gas pressure sintered at 1840 °C and at 22 bar with 1 h dwelling time. Thereby, we could achieve 97–98% theoretical density. The hardness was recorded 14–17 GPa while fracture toughness varied from 4.3 to 5 MPa m^1/2. Fretting experiments showed initial running-in period of 300 cycles for all the tribo-couples. After which, the steady state coefficient of frictions (COF) were achieved. Steel ball of 10 mm diameter, fretting against 50A composition, showed 0.6 average steady state COF while the same composition while fretting against alumina ball of the same diameter, showed 0.57 average steady state COF. Results have been compared with SiAlON composition derived from refractory powder (B1) and found that the 50A composition performs better under identical test conditions. Moreover, cytocompatibility study also suggests that the investigated 50A composition can be used as substrate to support cell adhesion and proliferation of L929 mouse fibroblast cell lines whereas B1 composition derived from refractory powders are toxic in nature.     

Combustion analysis of the diesel–biogas dual fuel direct injection diesel engine – the gas diesel engine

In this investigation, biogas (BG) was used as an alternative fuel in a single-cylinder, four-stroke, air-cooled, direct injection (DI) diesel engine that was operated on a dual fuel mode. Biogas was produced from a non-edible seed de-oiled cake-pongamia pinnata (Karanja), which was collected from the biodiesel industries. The BG was inducted along with the air in suction of the engine at four different flow rates varying from 0.3?kg/h to 1.2?kg/h in steps of 0.3?kg/h. The investigation results revealed that BG inducted at a flow rate of 0.9?kg/h gives better combustion characteristics of engine behaviour than those of other flows throughout the engine operation. The ignition delay (ID) and combustion duration of the engine run by dual fuel operation at a BG flow rate of 0.9?kg/h were found to be longer by about 2 °CA and 2.9 °CA, respectively, in comparison with diesel at full load. The cylinder peak pressure was found to be overall higher by about 11?bar than that of diesel at full load.