A Survey on Advanced Multiple Access Techniques for 5G and Beyond Wireless Communications

Wireless Personal Communications - This paper summarizes the ongoing research initiatives based on the advanced multiple access techniques towards the fifth generation (5G) wireless communication...     

Finite-element grid improvement by minimization of stiffness matrix trace

A new and simple method of finite-element grid improvement is presented. The objective is to improve the accuracy of the analysis. The procedure is based on a minimization of the trace of the stiffness matrix. For a broad class of problems this minimization is seen to be equivalent to minimizing the potential energy. The method is illustrated with the classical tapered bar problem examined earlier by Prager and Masur. Identical results are obtained.     

Deposition of thin film silicon using the pulsed PECVD and HWCVD techniques

We report on the use of pulsed plasma-enhanced chemical vapor deposition (P-PECVD) technique and show that “state-of-the-art” amorphous silicon (a-Si:H) materials and solar cells can be produced at a deposition rate of up to 15 Å/s using a modulation frequency in the range 1–100 kHz. The approach has also been developed to deposit materials and devices onto large area, 30 cm×40 cm, substrates with thickness uniformity (<5%), and gas utilization rate (>25%). We have developed a new “hot wire” chemical vapor deposition (HWCVD) method and report that our new filament material, graphite, has so far shown no appreciable degradation even after deposition of 500 μm of amorphous silicon. We report that this technique can produce “state-of-the-art” a-Si:H and that a solar cell of p/i/n configuration exhibited an initial efficiency approaching 9%. The use of microcrystalline silicon (μc-Si) materials to produce low-cost stable solar cells is gaining considerable attention. We show that both of these techniques can produce thin film μc-Si, dependent on process conditions, with 1 1 1 and/or 2 2 0 orientations and with a grain size of approx. 500 A. Inclusion of these types of materials into a solar cell configuration will be discussed.     

Micromanipulation and cloning studies on buffalo oocytes and embryos using nucleus transfer

1. Nine male volunteers were exposed to the pyrethroid insecticide cyfluthrin. The study was performed in an exposure room, where an aerosol containing cyfluthrin was sprayed to obtain atmospheres with mean cyfluthrin concentrations of 160 and 40 micrograms/m3. Four volunteers were exposed for 10, 30 and 60 min at 160 micrograms/m3 and another five volunteers were exposed for 60 min at 40 micrograms/m3. For 160 micrograms/m3 exposure urine samples were collected before and immediately after exposure as well as for the periods 1-2, 2-3, 3-4, 4-5, 5-6, 6-12 and 12-24 h after exposure. For 40 micrograms/m3 exposure urine samples were collected before and 2 h after exposure. 2. The main urinary cyfluthrin metabolites, cis-/trans-3-(2,2-dichlorovinyl)-2,2-dimethylycyclopropane carboxylic acid (DCCA) and 4-fluoro-3-phenoxybenzoic acid (FPBA), were determined. The limit of detection (LOD) for all metabolites was 0.0025 microgram in an urine sample of 5 ml (0.5 microgram/l). After inhalative exposure of 40 micrograms cyfluthrin/m3 air for 60 min, the amount of metabolites in urine collected in the first 2 h after exposure was less than the LOD, namely 0.14 microgram for cis-DCCA, 0.15-0.28 microgram for trans-DCCA and 0.12-0.23 microgram for FPBA. 3. Of the metabolites, 93% was excreted within the first 24 h (peak excretion rates between 0.5 and 3 h) after inhalative exposure of 160 micrograms/m3. The mean half-lives were 6.9 h for cis-DCCA, 6.2 h for trans-DCCA and 5.3 h for FPBA. 4. The mean trans-:cis-DCCA ratio was 1.9 for the time course as well as for each subject. 5. The amount of metabolites in urine depends on the applied dose, on the exposure time and shows interindividual differences.     

印度水电方面的技术成就

大型水电工程需要大量的开挖隧洞，作者是负责印度国家水电公司（NHPC）所属的Tessta Ⅱ级水电工程的总工程师，现对印度在水电开发中的最新隧洞开挖工程做了一个展望。     

Component fatty acids of Cladosporium herbarum fat

Cladosporium herbarum grown as a surface culture in a chemically defined medium of sucrose and inorganic salts gave a high yield of fat (29.2%). The component acids of this fat have been found to be palmitic (34.2%); oleic (15.9%); linoleic (34.2%) and linolenic (15.7%). The combined proportion of linoleic and linolenic acids being about 50 per cent, the fat will be of great value for the manufacture of oil-modified resins as the films produced by such resins do not become yellow with age.     

A matching game framework for users clustering and resource allocation with wireless power transfer in a CR-NOMA network

This paper investigates the resource allocation in a massively deployed user cognitive radio enabled non-orthogonal multiple access (CR-NOMA) network considering the downlink scenario. The system performance deteriorates with the number of users who are experiencing similar channel characteristics from the base station (BS) in NOMA. To address this challenge, we propose a framework for maximizing the system throughput that is based on one-to-one matching game theory integrated with the machine learning technique. The proposed approach is decomposed to solve users clustering and power allocation subproblems. The selection of optimal cluster heads (CHs) and their associated cluster members is based on Gale-Shapley matching game theoretical model with the application of Hungarian method. The CHs can harvest energy from the BS and transfer their surplus power to the primary user (PU) through wireless power transfer. In return, they are allowed to access the licensed band for secondary transmission. The power allocation to the users intended for power conservation at CHs is formulated as a probabilistic constraint, which is then solved by employing the support vector machine (SVM) algorithm. The simulation results demonstrate the efficacy of our proposed schemes that enable the CHs to transfer the residual power while ensuring maximum system throughput. The effects of different parameters on the performance are also studied.     

Boundary-Conforming Discontinuous Galerkin Methods via Extensions from Subdomains

A new way of devising numerical methods is introduced whose distinctive feature is the computation of a finite element approximation only in a polyhedral subdomain D{\mathsf{D}} of the original, possibly curved-boundary domain. The technique is applied to a discontinuous Galerkin method for the one-dimensional diffusion-reaction problem. Sharp a priori error estimates are obtained which identify conditions, on the subdomain D{\mathsf{D}} and the discretization parameters of the discontinuous Galerkin method, under which the method maintains its original optimal convergence properties. The error analysis is new even in the case in which D=W{\mathsf{D}}=\Omega . It allows to see that the uniform error at any given interval is bounded by an interpolation error associated to the interval plus a significantly smaller error of a global nature. Numerical results confirming the sharpness of the theoretical results are displayed. Also, preliminary numerical results illustrating the application of the method to two-dimensional second-order elliptic problems are shown.