Phase-Structural and Electrochemical Properties of La2MgNi9 Alloys

Powder Metallurgy and Metal Ceramics - Multiphase La 2 MgNi 9 alloys are synthesized by induction melting. The crystalline structures of all phases in the alloys are determined with X-ray...     

High‐performance thermosets with tailored properties derived from methacrylated eugenol and epoxy‐based vinyl ester

A renewable chemical, eugenol, is methacrylated to produce methacrylated eugenol (ME) employing the Steglich esterification reaction without any solvent. The resulting ME is used as a low‐viscosity co‐monomer to replace styrene in a commercial epoxy‐based vinyl ester resin (VE). The volatility and viscosity of ME and styrene are compared. The effect of ME loading and temperature on the viscosity of the VE–ME resin is investigated. Moreover, the thermomechanical properties, curing extent and thermal stability of the fully cured VE–ME thermosets are systematically examined. The results indicate that ME is a monomer with low volatility and low viscosity, and therefore the incorporation of ME monomer in VE resins allows significant reduction of viscosity. Moreover, the viscosity of the VE–ME resin can be tailored by adjusting the ME loadings and processing temperature to meet commercial liquid molding technology requirements. The glass transition temperatures of VE–ME thermosets range from 139 to 199 °C. In addition, more than 95% of the monomer is incorporated and fixed in the crosslinked network structure of VE–ME thermosets. Overall, the developed ME monomer exhibits promising potential for replacing styrene as an effective low‐viscosity co‐monomer. The VE–ME resins show great advantages for use in polymer matrices for high‐performance fiber‐reinforced composites. This work is of great significance to the vinyl ester industry by providing detailed experimental support. © 2018 Society of Chemical Industry     

Determination du coefficient d'extinction molaire de OH− dans les verres fluores a base de metaux lourds

The extinction coefficient ? at 2.9 μm for OH in fluoride glasses is measured by determining the amount of HF evolved during heating of the glass under steam and the corresponding intensity of the OH absorption band. This coefficient is respectively equal to 31 litre mole^?1 cm^?1 for BTYbZ glass (15 BaF₂ - 29 ThF₄ - 28 YbF₃ - 28 ZnF₂) and 19.5 litre mole^?1 cm^?1 for BALLA glass (34 BaF₂ - 57 ZrF₄ - 4 AlF₃ - 5 LaF₃).     

Electrochemical Faceting of polycrystalline platinum in HF solutions

The electrochemical faceting of polycrystalline (pc) platinum yielding a (100)-preferred oriented electrode surface was accomplished in HF solutions by applying to the pc platinum electrode a square wave potential perturbation at 1 kHz in the 0.2 to 1.3 V range (vs rhe). SEM patterns of the resulting surfaces were also obtained. For HF concentrations up to 2 M no appreciable influence of the electrolyte concentration on the electrochemical faceting was noticed. Otherwise, the voltammetric response of the (100)-type preferred oriented platinum surface in the H-adatom potential range when compared to previously reported data resulted remarkably sensitive to the electrolyte composition. The discussion of results was based on the non-equilibrium adsorption conditions for anions under the periodic perturbation.     

A logical approach to program analysis

This paper describesMicroScope, a framework for developing analysis tools for Lisp programs. MicroScope uses a knowledge-intensive approach for program representation and analysis. The analysis tools share a common object oriented program database, and a common Prolog inference engine. The use of Prolog and a declarative representation for programs permits sharing of information, and provides high bandwidth communication between diverse analysis tools. It also supports program specification and debugging activities in the same framework. Extensions to Prolog to support analysis are described, and two tools, theCritic and theExpector, are presented.This work supported in part by Hewlett-Packard Company, the National Science foundation Under Grant Number MCS81-21750 and the Defense Advanced Research Projects Agency under contract number DAAK11-84-K-0017.     

Phase I trial of inhaled natural interleukin 2 for treatment of pulmonary malignancy: toxicity, pharmacokinetics, and biological effects

Safety, local and systemic immunomodulation, and tumor response to treatment with aerosolized natural interleukin 2 (nIL-2) applied five times a day were studied in a Phase I trial in 16 patients with pulmonary malignancies refractory to conventional therapy. The toxicity of inhaled nIL-2 was different from that observed after systemic administration. Reversible airway irritation causing a nonproductive cough represented the dose-limiting toxicity. Mild to moderate reduction of the vital capacity and forced expiratory volume (FEV1) with minor effects on relative FEV1, peak expiratory flow, airway resistance, and PaO2 was experienced by individual patients. In 14 patients suffering from pulmonary metastases due to renal cell cancer, one durable complete response, one partial response, and one mixed response were observed. Inhalation of nIL-2 aerosol resulted in a dose-dependent expansion of pulmonary immunocompetent cells in bronchoalveolar lavage fluid. Posttreatment bronchoalveolar lavage showed an activated lymphocyte phenotype with increased HLA-DR expression. The only systemic biological effect detectable in peripheral blood was a marked increase of soluble interleukin 2 receptor serum levels. We conclude that treatment with aerosolized nIL-2 is an effective means for site-specific immunomodulation and deserves further investigation for the treatment of malignant and inflammatory lung disease.