Die zweite Phase der Feldbusentwicklung

The past decade may be regarded as the phase of the fundamental developments in fieldbus systems that were based on the OSI model. Today we are entering a second stage. It is the objective of this issue to present the current state and where the further developments will lead to. This introductory article is intended to give an overview on the subject.     

Transport properties of oxygen-deficient YBa2Cu3O7−x thin films

We report on measurements of the in-plane resistivityρ and Hall coefficientR _H (B∥c) of various oxygen-deficient epitaxial films of YBa₂Cu₃O_7?x in the normal state. The superconducting transition temperaturesT _c of the samples vary from 14 to 90 K. Both the resistivity and the Hall coefficient exhibit a strong dependence on the oxygen content and the temperature. Asx increases,T _c decreases continuously, whileρ andR _H gradually increase in magnitude. Furthermore, also the characteristic linear dependences ofραT andR _Hα T ^?1 of the highly doped compounds changes to a nonlinear behavior for the samples withT _c lower than 60 K. The unusual doping and temperature dependence ofR _H will be compared to the predictions of our calculations, based on a two-dimensional tight-binding model using the relaxation-time approximation. The model considers also the next-nearest-neighbor hopping, which strongly influences the predicted Hall coefficient. Additionally, the cotangent of the Hall angle cot(Θ _H ) is discussed in the framework of the two-dimensional Luttinger liquid theory.     

Clinical and economic impact of implementing a comprehensive diabetes management program in managed care

Diabetes mellitus places a significant burden on the U.S. healthcare system. Because of the potential to reduce diabetic complications and costs through intensive management, diabetes has become a primary target for disease management programs. We performed a retrospective analysis of short-term baseline and follow-up clinical, economic, and member and provider satisfaction data from approximately 7,000 people with diabetes being treated through seven managed care plans using Diabetes Treatment Centers of America's Diabetes NetCare, (Nashville, TN), a comprehensive diabetes management program. Our analysis indicates that Diabetes NetCare achieved gross economic adjusted savings of $50 per diabetic member per month (12.3%), with gross unadjusted savings of $44 (10.9%) per diabetic member per month. Hospital admissions per 1,000 diabetic member years decreased by 18%, and bed days fell by 21%. Patients with diabetes were more likely to get HbAlc tests, foot exams, eye exams, and cholesterol screenings while enrolled in the program. These data suggest that implementation of a comprehensive healthcare management program for people with diabetes can lead to substantial improvements in costs and clinical outcomes in the short-term. It is expected that improvements will increase over time, with continuing improvements in health status and a reduction in the number of future diabetic complications.     

Low-power low-noise active mixers for 5.7 and 11.2 GHz usingcommercially available SiGe HBT MMIC technology

The authors demonstrate the application of a commercially available SiGe heterojunction bipolar transistor monolithic microwave integrated circuit technology to active mixers in future communication systems at 5.7 GHz and above. This technology can be used to realise circuits with less than 50 mW power consumption, conversion gains above 15 dB and small double sideband noise figures of 3.6 and 9.4 dB for 5.7 and 11.2 GHz Gilbert cell mixer circuits, respectively     

A survey on the occurrence of Fusarium mycotoxins in Bavarian cereals from the 1987 harvest

Summary Bavarian cereals and wheat flour from the 1987 harvest were analysed for nivalenol (NIV) and deoxynivalenol (DON) using high performance liquid chromatography (HPLC) and for T-2 toxin and zearalenone (ZEA) by enzyme-linked-immunosorbent as say (ELISA). The study included 190 field samples of wheat, barley, rye and oat with visibly damaged ears, 45 samples of wheat intended for feed production and two series of wheat flour (type 550) and whole wheat flour collected in October 1987 and June 1988. The field samples examined showed a high DON contamination of wheat (87%) with an average of 3.96 mg/kg and a maximum of 43.8 mg/kg. Mean levels between 0.33 mg/kg and 0.27 mg/kg DON could be detected in barley, rye and oat. Of the wheat samples, 58% contained ZEA with a maximum of 1.560 mg/kg. The highest levels of ZEA were detected in samples which also showed high concentrations of DON. The NIV and T-2 toxin levels were comparatively low. Thirty percent of the samples showed NIV concentrations between 0.04 mg/kg and 0.29 mg/kg and 38% contained between 0.005 and 0.60 mg/kg of T-2. In the wheat samples for feed production, only DON was detected with an average of 0.190 mg/kg and a maximum of 0.75 mg/kg. The highest DON levels (0.58 mg/kg) from October 1987 were found in the wheat flour samples which were lower than the highest DON concentration (3.24 mg/kg) detected in the samples collected during June 1988. This fact was probably due to a substantial amount of non-contaminated wheat from 1986. The toxin concentrations in the whole wheat flour were not higher than in the type 550 flour. The regional distribution of the mean DON concentrations showed the highest levels in Middle and Lower-Franconia.

---

Vorkommen von Fusarium Mykotoxinen in bayerischem Getreide der Ernte 1987

Zusammenfassung Cerealien und Weizenmehle der bayerischen Ernte 1987 wurden mittels hochauflösender Flüssigchromatographie (HPLC) auf Nivalenol (NIV) und Deoxynivalenol (DON) Bowie mit Enzymimmunoassay auf T-2 Toxin und Zearalenon (ZEA) analysiert. Die Untersuchungen umfaßten 190 Feldproben von Weizen, Gerste, Roggen und Hafer, die alle optisch erkennbaren Fusarienbefall aufwiesen, 45 Futterweizenproben Bowie zwei Probenserien von Weizenmehlen der Type 550 und Vollkornweizenmehlen, die im October 1987 und im Juni 1988 gezogenwurden. — Die Untersuchungen der Feldproben ergaben eine hohe DON-Kontamination des Weizens (87%) mit einem durchschnittlichen Gehalt von 3,96 mg/kg und einem Maximalgehalt von 43,8 mg/kg. In Gerste, Roggen und Hafer konnten durchschnittlich zwischen 0,33 mg/kg und 0,27 mg/kg DON-nachgewiesen werden. 58% der Winterweizenproben wiesen Zearalenon mit einem Maximalgehalt von 1,56 mg/kg auf. Die höchsten ZEA-Werte wurden in Proben ermittelt, die gleichzeitig einen hohen DON-Gehalt aufwiesen. Die Konzentrationen von NIV und T-2 Toxin waren vergleichsweise niedrig. 30% der Proben hatten NIV-Gehalte zwischen 0,04 mg/kg und 0,29 mg/kg und 38% enthielten T-2 Toxin zwischen 0,005 mg/kg und 0,06 mg/kg. In den Futterweizenproben konnte DON als einziges Toxin mit einem Gehalt von durchschnittlich 0,19 mg/kg und maximal 0,75 mg/kg festgestellt werden. Die Weizenmehle, die im October 1987 gezogen wurden, wiesen maximal 0,58 mg/kg DON auf. Die Gehalte lagen damit medriger als die der Mehlproben vom Juni 1988, die maximal 3,24 mg/kg und durchschnittlich 0,26 mg/kg DON enthielten. Dieser Sachverhalt könnte auf Anteile von nicht kontaminiertem Weizen der Ernte 86 an den im October gezogenen Mehlproben zurückgeführt werden. Die Toxingehalte der Vollkornmehle waren nicht höher als die der Weizenmehle der Type 550. Die höchsten Durchschnittsgehalte von DON wurden in Mittel- und Unterfranken festgestellt.

     

Human-centred appraoches to control and information technology: European experiences

In this paper, the concept of Human-Centred Technology will be described with regard to the different dimensions of workplace, groupwork and networks and in terms of the frameworks of both society and the natural environment. These different aspects of Human-Centred Systems will be illustrated by a series of case studies representing several European countries. The report covers a wide range of research fields. The emphasis is on technology: the roles of control and information technology in enterprises today — including issues of applying AI — and the strategies of designing and implementing technology taking into account the specific aspects which characterize human-centred systems.     

Energy Metabolites as Biomarkers in Ischemic and Dilated Cardiomyopathy

With more than 25 million people affected, heart failure (HF) is a global threat. As energy production pathways are known to play a pivotal role in HF, we sought here to identify key metabolic changes in ischemic- and non-ischemic HF by using a multi-OMICS approach. Serum metabolites and mRNAseq and epigenetic DNA methylation profiles were analyzed from blood and left ventricular heart biopsy specimens of the same individuals. In total we collected serum from n = 82 patients with Dilated Cardiomyopathy (DCM) and n = 51 controls in the screening stage. We identified several metabolites involved in glycolysis and citric acid cycle to be elevated up to 5.7-fold in DCM (p = 1.7 × 10⁻⁶). Interestingly, cardiac mRNA and epigenetic changes of genes encoding rate-limiting enzymes of these pathways could also be found and validated in our second stage of metabolite assessment in n = 52 DCM, n = 39 ischemic HF and n = 57 controls. In conclusion, we identified a new set of metabolomic biomarkers for HF. We were able to identify underlying biological cascades that potentially represent suitable intervention targets.     

Numerical characterization and experimental verification of an in-plane MEMS-actuator with thin-film aluminum heater

In this paper, a novel concept of a thermo-mechanical MEMS actuator using aluminum thin-film heaters on a thermal oxide for electrical insulation is presented. The actuator is part of an universal tensile testing platform for thermo-mechanical material characterization of one dimensional materials on a micro- and nano-scopic scale under different environmental conditions, as varying temperatures, pressure, moisture or even vacuum and is realised in BDRIE technology. It is shown, that the actuator concept fulfills the requirements for the use in a tensile loading stage along with heterogeneously integrated nanofunctional elements, following a specimen centered approach in line with bottom-up self-assembly processes. Simulation and experiment agree very well in the thermal and mechanical domain and allow subsequent optimisation of the actuator performance.