Electrical,thermal and microwave shielding properties of printable silver nanowires

Silver nanowires find use in a myriad of applications, including communication systems, sensors, medical devices and electrical equipment. Temperature-dependent electrical and thermal properties of chemically derived silver nanowires are rarely explored. In the present work, seed-mediated synthesis of silver nanowires has been carried out, and their electrical and thermal conductivity at 300 K is found to be 1.848?×?10⁷ S/m and 64.8 W/mK, respectively. A screen-printable ink of silver nanowires is formulated and printed on low-cost and widely used substrates like paper and cotton fabrics. Flexible printed electrodes could be made possible with uniform printed structures obtained in cotton fabric and paper substrate. The printed pattern exhibited sheet resistance of 0.7 Ω/sq. Screen-printed silver nanowires on paper show shielding efficiency of 99.9% in X band, which promotes them as excellent candidates in fabricating lightweight electronic devices by a one-step printing process.

Graphical abstract

     

Reinforcement of ball shaped MoS2 nanoparticles in epoxy resin

The present work involves the synthesis of molybdenum disulfide (MoS2) nanoparticles by annealing the precursor obtained from simple reflux method. XRD, FESEM and HRTEM confirmed the formation of 2H-MoS2 with ball shaped particles, where some of them possess coalesced dumbbell morphology. The reinforcement of polysulphide modified epoxy resin (PSER) by MoS2 with varying amounts from 0.150 to 0.200 wt% provides unique combination of the improved thermal stability, tribological and mechanical properties. XRD studies indicate interaction between the sulphur containing nanoparticles and the epoxy resin. Maximum improvements in tensile strength (440%) and toughness (534%) are observed with ball shaped MoS2 nanoparticles (0.150 wt%)/PSER composite. Also the coefficient of friction and wear resistance show improvements of 60 and 78% respectively for 0.175 wt% loading in PSER compared to the neat resin matrix. Thermal stability is found to be improved maximum by 23 degrees C, when 5% weight loss is taken as a point of comparison. Similar studies on synthetic microcrystalline MoS2 filled PSER show that improvements in all these properties are very inferior.     

Preparation and properties of in‐situ polymerized polyurethane/stearate intercalated layer double hydroxide nanocomposites

The present work deals with the effect of stearate intercalated layered double hydroxide (St‐LDH) loadings on the morphological, mechanical, thermal, adhesive and flame retardant properties of polyurethane (PU)/St‐LDH nanocomposites prepared by the in situ polymerization method. X‐ray diffraction and transmission electron microscopy studies confirmed that exfoliation takes place at 3 wt% loading followed by intercalation at higher filler loadings in the PU matrix. The exfoliated structure has been further verified by atomic force microscopy. The measurements of stress‐strain, thermogravimetric analysis, dynamic mechanical analysis, lap shear strength and peel strength analysis showed that the nanocomposites containing 3 wt% St‐LDH exhibit excellent improvement in tensile strength (ca 175%) and log storage modulus (ca 14%), while PU/St‐LDH (5 wt%) possesses optimum improvement in glass transition temperature (ca 6 °C), lap shear strength (200%) and peel strength (130%) over neat PU. In addition, the gradual improvements in limiting oxygen index value with St‐LDH loading indicated the higher effectiveness in providing better barrier properties as well as better flame retardant behavior. Copyright © 2012 Society of Chemical Industry