Effect of temperature on raw whole milk density and its potential impact on milk payment in the dairy industry

The objective of this study was to determine the effect of temperature on whole milk density measured at four different temperatures: 5, 10, 15, and 20 °C. A total of ninety-three individual milk samples were collected from morning milking of thirty-two Holstein Friesian dairy cows, of national average genetic merit, once every two weeks over a period of 4 weeks and were assessed by Fourier transform infrared spectroscopy for milk composition analysis. Density of the milk was evaluated using two different analytical methods: a portable density meter DMA35 and a standard desktop model DMA4500M (Anton Paar GmbH, UK). Milk density was analysed with a linear mixed model with the fixed effects of sampling period, temperature and analysis method; triple interaction of sampling period x analysis method x temperature; and the random effect of cow to account for repeated measures. The effect of temperature on milk density (ρ) was also evaluated including temperature (t) as covariate with linear and quadratic effects within each analytic method. The regression equation describing the curvature and density–temperature relationship for the DMA35 instrument was ρ = 1.0338−0.00017T−0.0000122T² (R² = 0.64), while it was ρ = 1.0334 + 0.000057T−0.00001T² (R² = 0.61) for DMA4500 instrument. The mean density determined with DMA4500 at 5 °C was 1.0334 g cm⁻³, with corresponding figures of 1.0330, 1.0320 and 1.0305 g cm⁻³ at 10, 15 and 20 °C, respectively. The milk density values obtained in this study at specific temperatures will help to address any bias in weight–volume calculations and thus may also improve the financial and operational control for the dairy processors in Ireland and internationally.     

Hydrolysis of fats and oils with moist oat caryopses

To improve the economic feasibility of hydrolyzing fats and oils with moist oat caryopses, various factors affecting the efficiency of the process were studied. Caryopses produced with an impact-type dehuller exhibited greater lipase activity than those produced by a wringer-type dehuller. Abrasion of oat caryopses against each other in a fluidized bed released particles rich in lipase. Such lipase concentrates could be added to moist caryopsis reactors to speed fat hydrolysis. Beef tallow, lard, soybean oil and crambe oil were hydrolyzed more efficiently than corn oil, castor oil and milk fat. The poor hydrolysis of castor oil was attributed to the formation of esters with the hydroxy group of ricinoleic acid, and the hydrolysis of castor oil was increased by dilution of the substrate with hexane. Diglycerides inhibited the hydrolysis and accounted for the slower hydrolysis of corn oil. Hydrolysis of milk fat by moist oat caryopses resulted in preferential hydrolysis of C₆ to C₁₀ acids. Erucic acid was released from crambe oil at significantly slower rates than the other acyl groups. High conversions of fats and oils to free fatty acids could be attained by (i) exposing the fats and oils to two to three lots of moist caryopses, (ii) the use of special oat varieties with elevated lipase content, (iii) the addition of oat lipase concentrates to moist caryopsis reactors, and (iv) dilution of the substrate with hexane. Estimates of the cost of producing free fatty acids with these processes indicated that the first three should be profitable. Growth ofClostridium sporogenes spores could not be demonstrated in caryopsis reactors. During the incubation of moist oat caryopses immersed in oil, the free fatty acid content of the internal caryopsis lipid increased only slightly, but there were changes in its fatty acid composition.     

The importance of axial misalignment on the long term strength of polyethylene pipe butt fusion joints

The importance of axial misalignment at polyethylene pipe butt fusion joints has been assessed by undertaking elevated temperature lifetime tests. Both medium and high density polyethylene pipes were fusion joined to give aligned and controlled misaligned butt joints. These were tested under either a constant or fluctuating internal pressure loading using conditions that induced failure by slow, stable crck growth. It was observed that the lifetime of a butt joined system depends upon both the internal pressure or pressure range applied and the level of misalignment at the butt fusion joint. Increasing either the internal pressure (range) or the misalignment reduced system performance. These two variables of misalignment and internal pressure (range) may be incorporated into a single parameter, the amplified axial stress (or stress range) at the butt joint. This amplified or butt joint axial stress (or stress range) may be derived by considering the additional bending stresses introduced at the butt joint by virtue of misalignment combined with the axial stress loading.     

Metronidazole-loaded nanostructured lipid carriers to improve skin deposition and retention in the treatment of rosacea

The objective of the present investigation was to improve the skin deposition and retention of metronidazole (MTZ) in rosacea therapy by incorporating it into nanostructured lipid carriers (NLCs). The main challenge in this endeavor was the partial hydrophilicity of MTZ, which mandated careful selection of excipients, including solid and liquid lipids, surfactants, and their ratios in combination. NLCs were produced by the phase inversion temperature method and finally converted into a gel for topical application. The prepared nanoparticles were evaluated for their particle size, zeta potential, entrapment efficiency, solid-state characteristics, surface morphology, in vitro drug release, and permeation through excised skin. The gel was additionally characterized for its pH, drug content, viscosity, and spreadability. The prepared nanoparticles were spherical in shape and of size less than 300?nm. Incorporation of judiciously chosen excipients made possible a relatively high entrapment efficiency of almost 40%. The drug release was found to be biphasic, with an initial burst release followed by sustained release up to 8?hours. In comparison to the plain drug gel, which had a tissue deposition of 11.23%, the NLC gel showed a much superior and desirable deposition of 26.41%. The lipophilic nature of the carrier, its size, and property of occlusion enabled greater amounts of drug to enter and be retained in the skin, simultaneously minimizing permeation through the skin, i.e. systemic exposure. The results of the study suggest that NLCs of anti-rosacea drugs have the potential to be used in the therapy of rosacea.     

The outlook of zeolite-Y hampered metal–ligand framework as heterogeneous catalysts: synthesis,spectral account and catalytic features

Zeolite-Y enslaved complexes were prepared by the Flexible ligand method. Synthesized materials were characterized by various spectral tools like powder X-ray diffraction, spectral studies (UV–Vis and FT-IR), chemical analysis (ICP-OES and elemental), scanning electron microscopy, AAS and ¹H-NMR techniques. Further, BET and thermogravimetric (TG) analysis were also done for characterization of surface area, pore volume, thermal behavior, and related parameters. Baeyer–Villiger oxidation of cyclohexanone was carried out over Zeolite-Y enslaved complexes using hydrogen peroxide (H₂O₂) as an oxidant. The performance of the heterogeneous system with the homogeneous system was compared to determine the protection effect of the zeolitic matrix over the active center on the catalytic properties. In addition, the effect of experimental variables (various solvents, amount of catalyst, the mole ratio of substrate and oxidant, temperature, and reaction time) was examined in order to get absolute reaction conditions. Under the optimized reaction conditions, [Fe(nbab)₂]-Y was found to be a potential candidate, achieving 70 % ?-caprolactone selectivity.     

Measurement of the mass transfer coefficient and sherwood number for carbon spheres burning in a bubbling fluidized bed

A freely moving, machined sphere of graphite (or a rounded particle of a coal char) attached to a very thin, flexible thermocouple has been burnt in a bed of silica sand fluidized by air. Simultaneous measurements were made of [CO] and [CO₂] in the off-gases, as well as of the temperature of the burning particle. Each sphere of carbon was large enough (>2 mm) for its burning to be controlled by external mass transfer. These measurements, together with the relative rates of formation of CO and CO₂ obtained previously, enabled mass transfer coefficients and Sherwood numbers to be derived. Such measurements were made for different temperatures in the bed, sizes of sand, superficial velocities, and initial diameters of a graphite sphere. Only a slight decrease in Sh was found when the bed’s temperature was raised; this was accounted for by changes in the following physical properties: the density of the fluidizing gas, the diffusivity of O₂, the viscosity, and minimum fluidizing velocity of the air. There was no clear trend of Sh with the actual superficial velocity of the fluidizing air. On the other hand, Sh was increased significantly by using larger sand particles, mainly as a consequence of increasing the gas velocity in the interstices between the sand particles. All the measurements were correlated best by:

Full-size image

where

Full-size image

The first correlation gives Sh mid-way between all those from previous expressions in the literature. It holds only when the reacting particle is much larger than the fluidized inert particles of sand. An almost equally good correlation, but only for reacting spheres above a certain size, is:

Full-size image

     

Cobalt catalyzed hydroformylation of higher olefins in the presence of chemically modified cyclodextrins

The cobalt catalyzed hydroformylation of higher olefins in the presence of chemically modified cyclodextrins was investigated in an aqueous biphasic system. The effect of various parameters, such as the nature of the cyclodextrin and olefin, the temperature, the CO/H₂ pressure, the concentration of the cyclodextrin and TPPTS was studied. The results demonstrate that the partially methylated β-cyclodextrin gives good conversion (>92%) and selectivity (>92%) for the hydroformylation of higher olefins without impeding the recovery of the catalytic system.     

Role of microorganisms in improving nutritional status of the poor

The intestinal microflora as well as bacteria involved in fermentation of foods ordinarily consumed in India may contribute substantially for the improvement of nutritional status of poor Indians.     

Oxygen Deficiency and Hydrogen Turn ZnO Red

The effect of hydrogen on ZnO while annealing at 1370 K under oxygen-poor conditions with excess Zn vapor or Ti metal is studied. ZnO turns red only when hydrogen is present in a complex with oxygen vacancies. A practical method is described to remove hydrogen from ZnO in a sealed ampoule and to bind it to Ti metal. Hydrogen coupled to an oxygen vacancy is the simplest defect to explain the observations. The coloration is reversible at 1370 K by adding or removing hydrogen, consistent with an activation energy >1.5 eV. In red ZnO Hall data show a shallow donor level around 45 meV.     

Thiocompounds as simulants of sulphur mustard for testing of protective barriers

The protective potential of protective devices such as respirators, suits, gloves, and overboots is widely evaluated using the standard colorimetric test (spot disc breakthrough time test, also called SD BTT) involving sulfur mustard (SM) as the challenge chemical. The vesicant nature of SM makes the test inconvenient and poses stringent safety demands. Moreover, such tests are allowed only at a limited number of facilities, causing delay in product development and supply. This prompted the present study on the search for suitable SM simulant responsive to SD BTT test. The diffusivities at BTT (D_BTT) of 10 commercially available thiocompounds through butyl rubber (IIR) were compared vis‐a‐vis D_BTT of SM. For three representative thiocompounds, namely methyl (phenyl thio)acetate, 2‐chloroethyl phenyl sulfide (2‐CEPS) and phenyl‐n‐propyl sulfide (PNPS), the transport parameters through IIR were obtained. PNPS and 2‐CEPS were further compared with respect to D_BTT in elastomers such as IIR, ethylene–propylene–diene methylene rubber, polydimethylsiloxane, nitrile rubber, polybutadiene, and natural rubber. 2‐CEPS showed generally same order of D_BTT as SM implying its potential use as a simulant. The transport parameters for various 2‐CEPS/elastomer systems were also determined. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009