X-ray microtomography: Application to microstructure analysis of a cementitious material during leaching process

Leaching of cementitious materials leads to an increase in porosity, which has important consequences on transport and mechanical properties. The present study outlines the characterization of microstructural evolution in a mortar subjected to a chemical attack, by means of a powerful non-intrusive experimental method, namely synchrotron X-ray computed microtomography. This innovative method is used to measure the variation of porosity in a leached mortar. Having described the effects of leaching in mortar (influences on microstructure and on mechanical properties), we present the accelerated leaching process and the microtomographic analysis that have been used to monitor it. We then investigate the capacity of this method to quantify the evolution of porosity during the leaching process. The method is validated by comparison of the results obtained with data available in the literature.     

AgNO<Subscript>3</Subscript> spray tests: advantages,weaknesses, and various applications to quantify chloride ingress into concrete. Part 1: Non-steady-state diffusion tests and exposure to natural conditions

Within the framework of the evaluation and the prediction of chloride-induced corrosion risks, simple and rapid AgNO₃ spray tests can be proposed for various issues. This paper forms the first part of a series. In this first part, the Maultzsch procedure (spraying of 0.1-N AgNO₃ solution + K₂CrO₄) as well as the procedure based on the use of a sole AgNO₃ solution have been investigated on a broad range of concretes. These procedures have also been compared to the Collepardi procedure (spraying of 0.1-N AgNO₃ + fluoresceine). The feasibility of these colorimetric techniques on saturated specimens cast in laboratory, after non-steady-state diffusion tests carried out in various conditions, is discussed. In addition, the results obtained from applying such spray tests in field conditions on cores drilled out from various RC test specimens exposed to a marine environment (tidal zone) and to a road and cold environment (freezing-thawing cycles and spraying of deicing salts) are presented. Colorimetric methods have in particular been applied here to the assessment of the average chloride penetration depth and of its evolution versus time (kinetics). Moreover, the detection threshold of these techniques has been investigated in various environments. The possible sources of discrepancy on the results have been analysed.     

DSC and DMTA characterization of ternary blends

The phase behavior of ternary blends made of poly(epichlorohydrin) (PECH), poly(vinyl acetate) (PVAc) and poly(methyl methacrylate) (PMMA) has been investigated by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). DMTA measurements have been shown to be more sensitive than DSC for the detection of a second phase, for the determination of the composition of each phase, and the distribution of PECH in each of them. About 70% PECH was required to obtain a single narrow T_g in the ternary system, which suggests a single homogeneous phase in the limit of sensitivity of DMTA. This study also emphasizes the importance of the composition of the immiscible polymer pair (i.e. the PVAc/PMMA pair in the PECH/PVAc/PMMA system), in addition to the thermodynamic interaction parameters, for controling the phase behavior of ternary systems.     

Crack onset at a v-notch. Influence of the notch tip radius

A criterion to predict crack onset at a sharp notch in homogeneous brittle materials has been presented in a previous paper of one of the authors. It is reviewed and improved herein. It fulfils both the energy and the strength criteria and takes an Irwin-like form involving the generalized intensity factor of the singularity governing the elastic behaviour in the vicinity of a notch tip. The prediction agrees fairly well with the experiments although it slightly underestimates the experimental measures. A cause of this discrepancy can be that a small notch tip radius blunts the sharp corner. It is analysed in this paper by means of matched asymptotics involving 2 small parameters: a micro-crack increment length and the notch tip radius. A correction is brought to the initial prediction and a better agreement is obtained with experiments on PMMA notched specimens. Experiments performed on a stiffer material (Alumina/Zirconia) show that it is less sensitive to small notch tip radii. A remaining small discrepancy between experiments and predictions can be due to some non linear behaviour of the materials near the notch tip. In addition, without new developments, the method allows to determine the stress intensity factor at the tip of a short crack emanating from a sharp or a rounded v-notch.     

Filtres microondes en microruban suspendu

The authors present the design and the development of integrated microwave filters using suspended substrate microstrip, a technology that provides many advantages. Through quasi-static approximation the propagation structure has been treated using integral equations solved with the method of moments. Thanks to this tool of analysis and to an accurate synthesis method, a series of bandpass filters have been designed and manufactured. The results presented validate the accuracy of our design method.     

Multihour engineering and traffic routing optimization in hierarchical telephone networks

Classical hierarchical routing in telephone networks is extended to a wider class called out-of-chain routing in such a way that some useful properties of hierarchical routing are retained. This new routing pattern offers more potential paths than the fixed hierarchical one and can be introduced as a dynamic routing where the fixed alternate sequences change at some predetermined instants during the day. The effect of this new routing pattern on the network performances is examined. The main topic of this paper is to present heuristic methods used to optimise such routings in large networks. We show on artificial networks that the throughput of a given network can be significantly improved by suitable routing choices. We demonstrate that the integration of routing changes within a multihour dimensioning process is possible but the lack of realistic data does not permit at this time to quantify the value of routing optimization on real networks.     

A review of the effects of water transfers in the La Grande Hydroelectric Complex (Québec,Canada)

Construction of the La Grande Complex in Eastern Canada called for complete or partial diversion of six rivers, the mean annual discharge of which varied from 60 to 1600 m³ s^?1, and the transfer of water from two adjoining watersheds (1586m³ s^?1) into La Grande Rivière. Three of these rivers with reduced flow, Eastmain (from 700 to 95m³ s^?1), Opinaca (from 260 to 35m³ s^?1), and Caniapiscau (from 1708 to 960m³ s^?1) and the waterways with increased flows, Boyd-Sakami (from 1 to 811m³ s^?1) and La Grande Rivière (from 1760 to 3400m³ s^?1) were intensively monitored from 1978 to 1988, while the others were surveyed sporadically. Very few modifications were observed, compared to previous conditions, in banks stability, water quality, and aquatic fauna of the affected rivers: those which appeared can be explained by the water level fluctuations, the water quality of the tributaries of the residual drainage basin, and/or by the direct influence of the reservoirs. In James Bay, the areal extent of the Eastmain River and La Grand Rivière plumes varied with discharge in an exponential relation, mostly under ice cover; resources from the coastal environment had not yet undergone any major changes. Because of the very small population dwelling in the area, less than 3000 inhabitants, modifications in the hydrological regime of these rivers did cause relatively few impacts, the main being greater banks instability in specific locations, reduction of the thickness and ice cover on La Grande Rivière, enhancement of navigation constraints on Eastmain River, and higher mercury levels in fish related to operation of the reservoirs.     

Hepatic Δ9 and Δ6 desaturase activities during the recovery period following carbon tetrachloride poisoningdesaturase activities during the recovery period following carbon tetrachloride poisoning

The liver microsomal Δ⁹ and Δ⁶ desaturase activities have been studied in rats with carbon tetrachloride-induced hepatitis. Immediately after poisoning, significant decreases were observed for both types of desaturase activity. However, recovery kinetics were slower for the Δ⁶ desaturase than for the Δ⁹ desaturase. The activities of NADH-ferricyanide and NADH-cytochrome C reductases, proteins involved in the electron transfers associated with microsomal desaturation, were also measured. There was a fall in both activities after poisoning, but this decrease was less than that of the desaturase activities.