Comparison of single-fiber and macro electrode recordings: relationship to motor unit action potential duration

The factors contributing to the duration of a motor unit action potential (MUAP) are believed to be well known, with both manual measurements and computer simulations agreeing with respect to MUAP durations approaching 10 ms. In this investigation, it is clearly demonstrated that use of a wide-open amplifier bandpass combined with signal-to-noise ratio enhancement results in MUAP durations approaching 30 ms recorded with either a macro or single-fiber electrode. Why the clinically recorded MUAP duration differs significantly from these physiologic durations is discussed. A hypothesis is presented whereby the major contributing factor toward MUAP duration is the total time of action potential transmembrane current flow along the muscle fiber from end-plate zone to musculotendinous junction.     

Online grid measurement and ENS detection for PV inverter running on highly inductive grid

Photovoltaic (PV) and other sources of renewable energy are being used increasingly in grid-connected systems, for which stronger power quality requirements are being issued. Continuous grid monitoring should be considered so as to provide safe connections and disconnections from the grid. This letter gives an overview of the methods used for online grid measurement with PV inverters. Emphasis is placed on a method based on the injection of a noncharacteristic harmonic in the grid. Since this injection is regarded as a disturbance for the grid, different issues, i.e., the influence on total harmonic distortion (THD), the accuracy of line impedance measurement and the ENS (German abbreviation of Main Monitoring units with allocated Switching Devices) detection are studied. Laboratory results conducted on an existing PV inverter are presented to demonstrate the behavior of the PV inverter under different grid conditions. Some of the injection parameters are tuned in order to get an accurate measurement of line impedance.     

An efficient numerical algorithm for the study of time fractional Tricomi and Keldysh type equations

Engineering with Computers - This work addresses a hybrid scheme for the numerical solutions of time fractional Tricomi and Keldysh type equations. In proposed methodology, Haar wavelets are used...     

Pulsed laser deposition of silicon nitride thin films by laser ablation of a Si target in low pressure ammonia

We report the deposition of Si-N films by multipulse excimer laser ( = 308 nm, _FWHM = 30 ns) ablation of Si wafers placed in a slow flow of NH₃ in the pressure range (1 bar-1 mbar). The films are deposited on to a Si collector placed parallel to the Si target. We succeeded in depositing pure amorphous Si₃N₄ films at a pressure of 1 mbar of NH₃. The deposition rate reached a maximum value of 0.2–0.3 nm per pulse. At lower pressures, the deposited films consist of a fine mixture of three amorphous phases (amorphous stoichiometric silicon nitride, amorphous non-stoichiometric silicon nitride and amorphous silicon). The amorphous silicon is prevalent in films deposited at a pressure of several to several tens of bars. Droplets of polycrystalline -Si are sometimes visible on the film surface. The experimental evidence, is analysed with a view to elucidating the participation in the chemical synthesis of the three main stages of the process: the substance expulsion from the target by laser ablation, the transition through the gas of the expulsed substance and it's final impact on the collector. We conclude that silicon nitride is mostly synthesized during the impact on the collector of the flow of the ablated substance.     

Fractional wavelet transform for the quantitative spectral resolution of the composite signals of the active compounds in a two-component mixture

Fractional calculus is a powerful tool that has been applied successfully for the analysis of the complex systems. One interesting example of a complex mixture is given by the multicomponent pharmaceutical samples having constant matrix content. The main aim of this study is to develop a new approach based on the combined use of the fractional wavelet transform (FWT) and the continuous wavelet transform (CWT) in order to quantify atorvastatin (ATO) and amlodipine (AML) in their mixtures without requiring a chemical pretreatment. In the first step, the absorption spectra of the compounds and their samples were processed by the FWT method. In the next step, the CWT approach was applied to the fractional wavelet spectra obtained in the above step. The aim of the application of FWT is data reduction corresponding to the spectra of compounds and their commercial samples. In the following step, the CWT was used for the quantitative resolution of the composite signals of the analyzed compounds. After method validation, the proposed signal processing methods based on the combined use of the FWT and the CWT were successfully applied to the resolution of the composite spectra for the quantitation of atorvastatin (ATO) and amlodipine (AML) in tablets.     

InSAR validation based on GNSS measurements in Bucharest

This research aims to complex validate radar displacement products over Bucharest based on Global Navigation Satellite System or GNSS. Validation was represented by the comparison of the recent TerraSAR-X (TSX) displacement results with field GNSS data. For this purpose, 24 and 27 high-resolution images acquired from the TSX satellite between 2011 and 2014 were processed by Permanent Scatterer Inteferometry (PSI) and Small BASeline Subset (SBAS) – interferometric techniques using synthetic aperture radar (SAR) images. The images were selected from a larger pool of SAR images, after consulting weather databases, which helped eliminate the images acquired under adverse weather conditions. GNSS locations were cross-checked on high-resolution optical images and 21 ground points (including three permanent stations) were selected. All these points were (1) characterized by high coherence on radar images; (2) were on the ground; (3) were situated in large vacant spaces; and (4) far away from radar obstacles such as trees. A major challenge in achieving the research goal was to overcome the lack of permanent stations at the ground level within the area of Bucharest. Instead of permanent stations, our team designed and installed forced centring systems that remained stable over time, eliminating the instalment errors of GNSS receivers. The line-of-site (LOS) components derived from GNSS data have been compared with those of the SAR scatterers closest to the GNSS markers (never coinciding). For each location, the vertical reading was projected in the LOS of the SAR sensor. These readings were compared with the displacement values determined at the locations of permanent scatterers (PSs) within 100 m from the GNSS nodes, by eliminating all scatterers on buildings. The comparison has shown a good agreement.     

SEM investigations of iron surface ion erosion as a function of specimen temperature and incidence angle

Ion bombardment of iron surfaces produced an ion eroded surface microtopography strongly dependent on the incidence angle and specimen temperature. For bombardment temperatures exceeding the self-diffusion temperature, T _d, a microstructural smoothing process due to the thermally activated diffusion effects, assisted by ion bombardment, can be observed by SEM. The role of migrational processes which should be taken into account for a correct interpretation of the final surface topography formed by hot sputtering, was also considered.     

Dense Plasma Injection Experiment at MCX

We present preliminary results of the High Density Plasma Injection Experiment at the Maryland Centrifugal Experiment (MCX). HyperV Technologies Corp. has designed, built, and installed a prototype coaxial gun to drive rotation in MCX. This gun has been designed to avoid the blow-by instability via a combination of electrode shaping and a tailored plasma armature. An array of diagnostics indicates the gun is capable of plasma jets with a mass of 160 μg at 70 km/s with an average plasma density above 10¹⁵ cm⁻³. Preliminary measurements are underway at MCX to understand the penetration of the plasma jet through the MCX magnetic field and the momentum transfer from the jet to the MCX plasma. Data will be presented for a wide range of MCX field parameters, and the prospects for future injection experiments will be evaluated.     

Knowledge-Guided Data-Driven Model With Transfer Concept for Battery Calendar Ageing Trajectory Prediction

<正>Dear Editor, Lithium-ion(Li-ion) battery has become a promising source to supply and absorb energy/power for many energy-transportation applications. However, Li-ion battery capacity would inevitably degrade over time, making its related ageing prediction necessary.