Breakdown characteristics of oil and paper insulation for a very fast transient voltage

This paper describes the dielectric breakdown characteristics of oil and oil‐impregnated paper for very fast transient (VFT) voltages. Blumlein circuits generate VFT voltages of 60 and 300 ns in a pulse width that simulates disconnecting switching surges in gas‐insulated switch gears. We measured the breakdown voltages of needle‐to‐plane, plane‐to‐plane oil gaps and several pieces of paper between plane electrodes for VFT and lightning impulse voltages. The measured data were formulated in V‐t characteristics and Weibull probability distributions. The inclination n of V‐t characteristics of insulating paper is 150, which is less than n = 13.7 of the plane‐to‐plane oil gap in the VFT time range. The shape parameters of Weibull distribution obtained in this study show that the scattering of breakdown voltages of paper is much less than that of oil. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(4): 16–24, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10043     

The short-term effect of a smoking prevention program for the upper graders of elementary schools--the results of intervention study for two years with quasi-experimental design

The purpose of this study was to evaluate the short-term effect of a smoking prevention program for Japanese elementary school-children in the fifth and sixth grades. The program was developed with concepts found in the Know Your Body Program and the conclusions of a National Cancer Institute-convened Expert Advisory Panel, and focused on teaching about the short-term effects of smoking and on resistance to social pressures to smoke. The study was conducted with a quasi-experimental design. An intervention group (52 boys and 54 girls) received three sessions for both the fifth grade in 1992 and the sixth grade in 1993. Moreover, the intervention group received a pre-test before the first session and a post-test after the third session in each grade. A comparison group (102 boys and 91 girls) received the same tests at the same time as the intervention group, but did not receive any program on smoking prevention. The short-term effect of the program were evaluated using the results of the pre-test in the fifth grade and of the post-test in the sixth grade in both groups. The results were as follows: 1) Remarkable short-term effects of the intervention were seen in respect to awareness of the importance of not smoking in girls, and also in the knowledge of the short-term effects of smoking in both sexes. 2) The intervention was not effective with respect to intention to smoke at the age of 20 and self-efficacy of refusing to smoke in both sexes. 3) The short-term effects were not clear in the smoking behavior in both sexes because the rates of ever smokers and of monthly smokers were almost the same for two years between the intervention group and the comparison group. 4) The smoking behaviors of children, their parents and their best friends had little influence on the results of the post-test in the sixth grade.     

Au/Pt/Ti/Ni ohmic contacts to p-ZnTe

Ohmic contacts of Au/Pd/Ti/Ni to p-ZnTe show a minimum specific contact resistance of 10^-6 Ωcm² for a p-type doping level of 3×10¹⁹ cm^-3 and at an annealing temperature of 300°C. The Ni and Ti layers are very effective in improving the electrical properties of these contact     

TRVs and fault clearing stresses in extra-high-voltage radial networks

To cope with the high rate of increase of power demand in the main industrialized districts in Japan, 550-kV transmission systems covering the districts have been reinforced, with most of the main power plants connected directly to these systems. Through 550-/300-kV substations, the majority of power to the districts is supplied by 300-kV systems. To limit the excess short-circuit capacity in the 300-kV systems, they tend to be reconstructed as so-called radial networks. In radial networks with high short-circuit capacity and relatively small number of transmission lines connected to the substation busbars, the rate of rise of TRV can be far higher than standard value. This paper analyzes the transient recovery voltages (TRV) in such extra-high-voltage radial networks in Japan, together with the relevant stresses to circuit-breakers during fault clearings. Future system conditions have also been introduced. As the typical rate of rise of the TRV values, more than twice that of today's standard ones are probable.     

Planar AlGaAs/GaAs heterojunction bipolar transistors fabricatedusing selective W-CVD

The authors describe a planar process for the AlGaAs/GaAs HBTs in which collector vias are buried selectively, even to the base layers, with chemical vapor deposited tungsten (CVD-W) films. By using WF₆ /SiH₄ chemistry, W could be deposited on Pt films, which were overlapped 50 nm thick on the AuGe-based collector electrodes, without depositing W on the surrounding SiO₂ layers. Current gains of planar HBTs with 3.5-μm×3.5-μm emitters were up to 150, for a collector current density of about 2.5×10⁴ A/cm²     

Association of the glycogen synthase locus on 19q13 with NIDDM in Pima Indians

Skeletal muscle glycogen synthase (encoded by GYS1 on chromosome 19q13.3) is the rate-limiting enzyme in insulin-mediated non-oxidative glucose disposal. Our previous studies have demonstrated an impairment of insulin-stimulated GYS1 activities in insulin-resistant Pima Indians, and associations of non-insulin-dependent diabetes mellitus (NIDDM) with the GYS1 locus were reported recently in Finnish and Japanese populations. We have performed linkage and association analyses of GYS1 and seven additional DNA markers on 19q with NIDDM, and with parameters of insulin action in the Pima Indians. We have found a significant association of NIDDM with GYS1 genotypes (p = 0.009), and with common GYS1 alleles (p = 0.022) in the Pima Indians. We have performed a detailed comparative analysis of the GYS1 gene, mRNA, and protein product in insulin-sensitive and insulin-resistant Pima Indians. No mutations in GYS1 coding sequences were detected; nor did we find alterations of GYS1 mRNA expression or of its basal enzymatic activity in insulin-resistant Pima Indians. These results contrasted with a 25% reduction of immunoreactive protein in insulin-resistant subjects as detected by Western blotting with an antibody specific for the C-terminal end of GYS1 (t-test p = 0.024; Wilcoxon's rank-sum test, p = 0.04). Because no mutations were detected in the DNA encoding this epitope, the difference in immunoreactivity may reflect post-translational modification(s) of the protein rather than a difference in the gene itself, or it could have occurred by chance. We conclude that our data do not indicate alterations in the GYS1 gene as the cause for the observed association, and that a different locus near GYS1 may be the contributing genetic element.     

Ring hydrogenation of naphthalene and 1-naphthol over supported metal catalysts in supercritical carbon dioxide solvent

Catalytic ring hydrogenations of naphthalene and 1-naphthol were studied over several supported metal catalysts in supercritical carbon dioxide solvent at low temperature. Higher concentration of hydrogen in supercritical carbon dioxide and lower reaction temperature were responsible for higher catalyst activity and selectivities to the desired partial ring hydrogenated products as compared with those observed in organic solvent for the same catalyst.     

Hydrolysis of human horny cells by alkaline protease: Morphological observation of the process

The interaction of highly purified alkaline protease fromBacillus sp. KSM-K16 with the horny cells of human skin contained in skin grime was directly visualized by electron microscopy. It became clear that the protease first penetrates the horny cells and then adsorbs, mainly onto the internal structure of the cells at the initial stage of hydrolysis, and directly hydrolyzes the keratin filaments, though the marginal band surrounding them retains its original shape. Then, hydrolysate produced from the keratin filaments flows out of the cell, and early in the hydrolysis process keratin filaments decrease and then disappear, leaving a marginal band, i.e., the cell turns to a hollow state. As a result, the remaining marginal band loses support from inside the cell, thus promoting cleavage and dispersion. Until this stage in the protease reaction, the remarkable liberation of hydrolysis products as water-soluble protein does not occur.     

Novel method of preparing Ag–Hg alloy on polyacrylamide films and their structure

A novel method is proposed of preparing thin Ag–Hg alloy on PAAm film surface at room temperature: The film of interest is formed by holding PAAm aqueous solution with AgNO₃ in Hg-saturated atmosphere. Two kinds of films, one of which is a conductor and the other an insulator, can be selectively formed with pH-controlled PAAm solution by ammonia. The conducting surface is assigned to the α phase of Ag–Hg alloy by means of X-ray analysis. Potentiometric titration and IR spectral studies suggest the existence of PAAm–Ag⁺ complexes. On the basis of their structure and the oxidation and reduction potential of Ag⁺ and Hg²⁺, the mechanism of film formation is also discussed.     

Applying MHD technology to the continuous casting of steel slab

The application of magnetohydrodynamics (MHD) in the continuous casting process started with the electromagnetic stirring of the stand pool with a traveling magnetic field. It has now advanced to the electromagnetic stirring of molten steel in the mold and the control of molten steel flow by an in-mold direct current magnetic field brake. These applied MHD techniques are designed to further improve the continuous casting process capability. They improve the surface quality of cast steel by homogenizing the meniscus temperature, stabilizing initial solidification, and cleaning the surface layer. They also improve the internal quality of cast steel by preventing inclusions from penetrating deep into the pool and promoting the flotation of argon bubbles. Applied MHD technology is still advancing in scope and methods in addition to the improvement of conventional continuously cast slab qualities. The continuous casting of bimetallic slab by suppressing mixing in the pool is one example of this progress.