Effects of Prior Annealing on the Spark Plasma Sintering of Nanostructured Y2O3 Powders

The effects produced by annealing Y₂O₃ nanopowders on their spark plasma sintering (SPS) behavior are systematically investigated in this work. It is found that the annealed powders display higher sinterability with respect to the as‐received ones. Indeed, the maximum densification level reached from pristine powders is about 97.5%, whereas density decreases when further increasing either the sintering temperature or the dwell time. In contrast, the density of SPS products obtained from pretreated powder monotonically increases with temperature and processing time, thus leading to fully dense materials in 30 min at 1050°C and 60 MPa. Correspondingly, it is found that the annealing treatment markedly inhibits grain coarsening during SPS. Thus, dense translucent samples with grain size below 100 nm can be attained from annealed powders. On the other hand, white‐opaque specimens with significantly coarser microstructures (up to 1‐μm‐sized grains) are obtained when pristine powders are directly processed under the same sintering conditions. Furthermore, it is observed that the annealing treatment of SPS samples in air allows for graphite contamination removal, whereas no improvement in term of light transmittance is produced.     

Electro-copolymerisation of indene and styrene

Electroinitiated cationic copolymerisation of indene and styrene was investigated by constant potential electrolysis. Effects of copolymerisation potential and temperature on the copolymer composition and the reactivity ratios are discussed. The reactivity ratios of the monomers were calculated according to the integrated Lewis-Mayo equation.     

Instructional texts rewritten by five expert teams: Revisions and retention improvements.

700 undergraduates were tested in 3 experiments on original or rewritten versions of 52 instructional texts about Army job tasks, general science, philosophy, and history. Five experts had rewritten various sets of the texts and stated hypotheses about the efficacious features of their revisions. We tested their hypotheses and several others. Recall and recognition tests were given immediately and after a 24-hr delay. Results showed that revisions made by 3 of the 5 experts improved retention of text information. The kind and number of revisions and improvements varied across the text sets. Most expert hypotheses were not supported, and they made many revisions they were declaratively unaware of. Some of our hypotheses about the revision features were supported, but different features were effective for different sets of texts. It was concluded that some experts have effective knowledge about improving instructional text, but it exists primarily in procedural form. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Study of liquid injection impact on the performance of new refrigerant mixtures

In this paper, the test results of liquid injection impact on the performance of new alternative refrigerant mixtures such as: R-410A, R-507, R-407C and R-404A are discussed, analysed and presented. The test results were obtained using an air-source heat pump set-up with enhanced surface tubing under various liquid injection ratios. Performance tests were conducted according to the ARI/ASHRAE standards. The performance data demonstrated that as liquid injection ratio increases, compressor head pressure and discharge temperature decrease. This has a positive effect in protecting the compressor. The effect of liquid injection on mixture behaviour varies from one mixture to another depending upon the mixture's composition. Furthermore, liquid injection appears to have a significant influence on R-410A behaviour compared to the other mixtures in question. Copyright © 2002 John Wiley & Sons, Ltd.     

In vitro cytotoxicity and DNA damage production in Chinese hamster ovary cells and topoisomerase II inhibition by 2-[2''-(dimethylamino)ethyl]-1, 2-dihydro-3H-dibenz[de,h]isoquinoline-1,3-diones with substitutions at the 6 and 7 positions (azonafides)

The p53 tumor suppressor gene encodes a phosphoprotein which when overexpressed can induce growth arrest at the G1 and G2/M phases of the cell cycle, promote differentiation and apoptosis. This paper demonstrates that p53 can associate with trk tyrosine kinase. Expression of a murine temperature-sensitive (ts) p53 mutant in PC12 cells overexpressing trk (a model system to analyse cellular differentiation and signal transduction induced by NGF) induces morphological changes in the absence of NGF stimulation at 32 degrees C but not at 37 degrees C. In cells differentiated by p53, trk, but not EGFr, was hyperphosphorylated on tyrosine. Furthermore trk was not phosphorylated when expressed in Saos-2 cells (human osteosarcoma cells that lack expression of both endogenous trk and p53) at either temperature. However, transfection of ts p53 into these cells induces trk phosphorylation at 32 degrees C in the absence of NGF stimulation. Association of trk and p53 can be detected in NIH3T3 and PC12 cells co-expressing trk and the ts p53 mutant, in NIH3T3 and PC12 cells transfected with trk alone, and in untransfected PC12 cells, showing that overexpressed and/or endogenous trk associates with endogenous, low levels of p53. These data suggest a novel function for p53 which involves the stimulation of signal transduction pathways (mediating morphological properties of cells), possibly through association with and hyperphosphorylation of trk.     

Fault tolerance in FFT arrays: Time redundancy approaches

Fault tolerance in VLSI/WSI FFT arrays acquires relevance when defects and run-time faults become significant, due to large dimensions of processors and arrays. Then, both restructuring to overcome end-of-production defects and reconfiguration to overcome run-time faults are required, to achieve the dual purposes of higher yield and higher reliability.Adopting as basic FFT network the two-dimensions array that directly corresponds to the FFT flow graph, the usual structure redundancy techniques tailored for two-dimensions arrays reconfiguration are not well applicable, since the limited locality of this network leads to relevant area increase due to the augmented interconnection structure.In this paper,time redundancy is suggested as a viable alternative for the two-dimensions FFT array; two different solutions are presented, one based oninter-stage reconfiguration, the other one adoptingintra-state reconfiguration, both allowing for survival to multiple faults with limited increase of network complexity and very small hard-core sections. As usual in many time redundancy methods, both approaches result in a processing speed equal to half the processing speed granted by an ideal, fault-free device.Reliability and survival ratios to multiple faults are evaluated for the two cases, taking into account also the area increments necessary for fault tolerance. The reliability evaluations allow for a direct comparison of the two solutions.     

Manganese Distribution between FeO‐MnO‐SiO2–CaO–MgO‐Al2O3 Slags and Molten Iron

Pretreatment of high manganese hot metal is suggested to produce hot metal suitable for further processing to steel in conventional LD converter and rich manganese slags satisfy the requirements for the production of silicomanganese alloys. Manganese distribution between slag and iron represents the efficiency of manganese oxidation from hot metal. The present study has been done to investigate the effect of temperature, slag basicity and composition of oxidizer mixture on the distribution coefficient of manganese between slag and iron. Ferrous oxide activity was determined in molten synthetic slag mixtures of FeO‐MnO‐SiO₂–CaO–MgO‐Al₂O₃. The investigated slags had chemical compositions similar to either oxidizer mixture or slags expected to result from the treatment of high manganese hot metal. The technique used to measure the ferrous oxide activity in the investigated slag systems was the well established one of gas‐slag‐metal equilibration in which molten slags contained in armco iron crucibles are exposed to a flowing gas mixture with a known oxygen potential until equilibrium has been attained. After equilibration, the final chemical analysis of the slags gave compositions having a particular ferrous oxide activity corresponding to the oxygen potential of the gas mixture. The determined values of ferrous oxide activity were used to calculate the equilibrium distribution of manganese between slag and iron. Higher manganese distribution between slag and iron was found to be obtained by using oxidizer containing high active iron oxide under acidic slag and relatively low temperature of about 1350°C.     

Multi-User MIMO Mobile CDMA Uplink System Employing Turbo Coding and Joint Detection Through a Multipath Rayleigh Fading Channel

In this paper, a generalized multiple-input multiple-output (MIMO) antenna system that can be fitted to the uplink of a wireless communication system is considered for the general case of multi-user. At the transmitter, the information bits are Turbo coded, then interleaved and passed through a serial-to-parallel converter. The channel is assumed bad urban suffering from multipath Rayleigh fading resulting in inter-symbol and multiple access interferences (ISI and MAI). At the front-end of the receiver, a number of receiving antennas are used followed by a joint multi-user estimator based on the Minimum Mean Square Error Block Linear Equalizer (MMSE-BLE).Computer simulations demonstrate a significant performance improvement in both single user and multi-user cases.This paper depends in parts on that presented at the 11th European Wireless Conference, Cyprus, Nicosia, pp. 187–192, April 2005. Yasmine A. Fahmy was born in Guiza, Egypt, on June 4, 1976. She received the B.Sc., M.Sc. and Ph.D. degrees in Communication and Electronics engineering from Cairo University, Egypt on 1999, 2001 and 2005 respectively. She is presently an assistant professor at Cairo University, Egypt. Her current field of interest is wireless communication and channel estimation. Hebat-Allah M. Mourad received her B.Sc., M. Sc. and Ph.D. degrees in electrical communication engineering from Cairo University, Egypt, in 1983, 1987 and 1994 respectively. Since 1983, she has been with the Department of Electronics and Communications, Faculty of Engineering, Cairo University, and is currently associate professor there. Her research interests include optical fiber communications, mobile and satellite communications. Emad K. Al-Hussaini received his B.Sc degree in Electrical Communication Engineering from Ain-Shams University, Cairo, Egypt, in 1964 and his M.Sc and Ph.D. degrees from Cairo University, Giza, Egypt, in 1974 and 1977, respectively. From 1964 to 1970, he was with the General Egyptian Aeroorganization. Since 1970, he has been with the Department of Electronics and Communications, Faculty of Engineering, Cairo University, and is currently professor there. He was a research fellow at Imperial College, London, UK, and at the Moore School of Electrical Engineering, University of Pennsylvania, Philadelphia, PA, USA, in the academic years 1976/1977 and 1981/1982, respectively. In 1990, he received the Egyptian national encouragement award for outstanding engineering research. He has written several papers for technical international journals and conferences. His research interests include signal processing, fading channel communication, modulation, and cellular mobile radio systems. Dr Al-Hussaini is a senior member of IEEE. He is listed in Marquis Whos Who in the World and in the IBC (International Biographical Center, Cambridge) for outstanding people of the 20th century.