Effects of Surface Concentration on Drying Behavior of Carbohydrate Solutions

As the surface properties of the drying materials are very important not only for the drying rate but also for the quality change during drying, the effects of surface concentration on the drying behavior of liquid foods (sugar solutions) were investigated by isothermal drying experiments and by numerical calculation experiments. The isothermal drying experiments with gelled sugar solution systems (sucrose and maltodextrin) were carried out at various relative humidity (RH) values (RH = 0 to 84%). Separate experiments were carried out for determination of the desorption isotherms.

The isothermal drying curves of sugar solutions at RH = 0 to 51% were very similar. Numerical simulations also showed that the drying curves of these sugars at the surface concentration = 0 and 0.1 are almost the same, although the concentration distributions are different.

When a small amount of gelatin was added to sugar solutions, the drying rate decreased remarkably as the gelatin might form a thin film (skin) near the surface, and consequently the retention of ethanol increased.     

A light refractory concrete for thermal insulation

Compositions have been developed for nonshrinking vibrocast thermally insulating light refractory concretes with densities of 1.0, 1.3, 1.5, and 1.8 g/cm³ for temperatures of use up to 1400°C. The structure and properties have been examined for the concrete of density 1.3 g/cm³. __________ Translated from Novye Ogneupory, No. 4, pp. 29–32, April, 2008.     

Turbulent flow of a chemically reactive gas suspension in a channel with a blow

The influence of the chemical reactions occurring in the gas phase of a gas suspension flowing in a channel with penetrable walls and the combustion of the condensed-impurity particles in this flow on its gasdynamic structure has been investigated. It is shown that the order of the system of equations defining a flow of a chemically reactive gas suspension with a homogeneous exothermic reaction proceeding at a definite rate and a heterogeneous combustion of the condensed-phase particles can be decreased if certain assumptions are mode. The distributions of the parameters of the gas and dispersed phases were calculated as functions of the rate of blow and the sizes of the particles. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 80, No. 4, pp. 91–98, July–August, 2007.     

Distance spectrum analysis of space-time trellis-coded Modulations in quasi-static Rayleigh-fading channels

In this correspondence, we propose an algorithm for computing the distance spectrum of a space-time trellis code achieving maximal diversity gain in quasi-static fading channels. We further present a state reduction technique for trellis codes that can reduce the complexity of the distance spectrum computation. We provide numerical results supporting the empirical evidence that a truncated union bound obtained from the distance spectrum provides an accurate characterization of the relative performance ordering of different space-time trellis codes and, therefore, it offers a tool for better space-time trellis code design.     

The inositol-1,4,5-trisphosphate system is involved in rapid effects of aldosterone in human mononuclear leukocytes

There is increasing evidence for rapid steroid action on electrolyte transport in human mononuclear leukocytes (HML). In HML, aldosterone stimulates the Na+/H+ antiporter within a few minutes. Because a variety of hormones and growth factors activate the Na+/H+ antiporter via protein kinase C and inositol phospholipids, a possible involvement of inositol-1,4,5-trisphosphate (IP3) in the rapid effects of aldosterone in HML was investigated. The stimulation of IP3 generation was started by the addition of aldosterone, concanavalin A, or other steroids. A significant increase in IP3 levels by aldosterone (1 nmol/L, P < 0.05) was found after 1 min, similar to that found after concanavalin A (25 micrograms/mL). Aldosterone caused a concentration-dependent elevation of IP3 levels, with an apparent EC50 of approximately 0.1 nmol/L. Fludrocortisone stimulated IP3 generation at similar concentrations, whereas a weaker IP3 stimulation by glucocorticoids (hydrocortisone, dexamethasone) occurred at micromolar concentrations only. Canrenone, a potent inhibitor of classical aldosterone action, was not effective up to a concentration of 100 nmol/L. These findings show kinetic and pharmacological similarities with both the functional data on Na+/H+ antiport stimulation by aldosterone and the studies of 125I-aldosterone binding to plasma membranes of HML. Thus, these data are the first to indicate an involvement of the phosphoinositide pathway in the rapid membrane effects of aldosterone.     

Measurement of forming trajectories during drilling

Results are provided for an experimental study of forming trajectories during drilling and the effect on them of cutting speed and drilling depth. __________ Translated from Izmeritel’naya Tekhnika, No. 8, pp. 31–33, August, 2006.     

Numerical simulation of developing natural convection in an enclosure due to rapid heating

Effects of thermoacoustic wave motion on the developing natural convection process in a compressible gas-filled square enclosure were investigated numerically. In the cases considered, the left wall temperature is raised rapidly (impulsively or gradually) while the right wall is held at a specified temperature. The top and the bottom walls of the enclosure considered are thermally insulated. The numerical solutions of the full Navier-Stokes equations were obtained by employing a highly accurate flux-corrected transport algorithm for the convection terms and by a central differencing scheme for the viscous and diffusive terms. The strength of the pressure waves associated with the thermoacoustic effect and resulting flow patterns are found to be strongly correlated to the rapidity of the wall heating process. Fluid thermal diffusivity was found to affect the strength of the thermoacoustic waves and the resulting interaction with the buoyancy-induced flow.     

Effect of coke quality on blast-furnace performance indices

The quality of coke has a strong effect on the performance indices of a blast furnace. For a furnace to operate with high productivity and a low coke rate, it is necessary to use coke with high strength characteristics. The Novolipetsk Metallurgical Combine has conducted studies of the effect of coke quality on the operation of blast furnaces of different sizes. The quality of the coke was evaluated on the basis of the following indices: CSR, CRL, the cold-strength indices M₁₀ and M₂₅, and the integral coke-quality index I_g.c used by the Sidmar company. Furnace productivity, coke rate, and the totterman index (DMI) were also used for the sake of comparison.