Design of an antibacterial gelatin based on a covalent protein–protein coupling

An antibacterial peptide (AMP), i.e., nisin, was covalently bound to gelatin through a protein–protein coupling. Various reaction conditions were tested to study and optimize parameters of grafting e.g., orientation and density of AMP, which could impact the final antibacterial activity of the modified biopolymer. Modification was investigated by Fourier transform infrared (FT‐IR) spectroscopy and zeta potential. The antibacterial activity of the nisin‐enriched gelatin was evaluated against two staphylococci bacterial strains, i.e., Staphylococus epidermidis and Staphylococcus aureus. A higher activity was found for gelatin modified at pH = 7.4 revealing an influence of the nisin orientation on the protein antibacterial property. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41825.     

Food recognition using neural network classifier and multiple hypotheses image segmentation

ABSTRACT

This paper proposes the multiple-hypotheses image segmentation and feed-forward neural network classifier for food recognition to improve the performance. Initially, the food or meal image is given as input. Then, the segmentation is applied to identify the regions, where a particular food item is located using salient region detection, multi-scale segmentation, and fast rejection. Then, the features of every food item are extracted by the global feature and local feature extraction. After the features are obtained, the classification is performed for each segmented region using a feed-forward neural network model. Finally, the calorie value is computed with the aid of (i) food volume and (ii) calorie and nutrition measure based on mass value. The experimental results and performance evaluation are validated. The outcome of the proposed method attains 0.947 for Macro Average Accuracy (MAA) and 0.959 for Standard Accuracy (SA), which provides better classification performance.     

Sensory-specific satiety: comparison of taste and texture effects

The respective contributions of taste (saltiness and sweetness) and texture (the hardness dimension) to sensory-specific satiety (SSS) were compared. Sixteen male and 16 female, young, normal-weight adults rated the pleasantness of taste, pleasantness of texture and desire to eat on visual analog scales for eight test foods, were then given one of the foods to eat ad libitum for lunch, and re-rated the same parameters for the eight foods 2 and 20 min after the end of the meal. The experimental sets of eight test foods and four lunch foods were balanced for taste quality (salty vs. sweet) and texture quality (hard vs. soft). Lunch foods were the hard and soft versions of a salty food (ham and cheese sandwich on baguette vs. white bread) or of a sweet food (apples vs. applesauce). Sensory-specific satiety was observed for both saltiness and sweetness (e.g. pleasantness of the taste of, and desire to eat sweet test foods decreased significantly after eating a sweet lunch food and similarly for salty foods), and to a lesser extent for texture (e.g. pleasantness of the texture of, and desire to eat hard test foods decreased after eating a hard lunch food and similarly for one of the soft foods). The authors conclude texture-specific satiety may be a significant component of satiety.     

A Sketch-Based Interface for Clothing Virtual Characters

This interactive system for garment creation determines a garment's shape and how the character wears it based on a user-drawn sketch. The system then uses distances between the 2D garment silhouette and the character model to infer remaining distance variations in 3D     

Complete oxidation of methane at low temperature over Pt and Pd catalysts for the abatement of lean-burn natural gas fuelled vehicles emissions: influence of water and sulphur containing compounds

The catalytic activity of fresh Pd and Pt catalysts supported on γ-alumina in the complete oxidation of CH₄ traces under lean-burn conditions was studied in the presence or the absence of water or H₂S. Steam-aged catalysts were also studied in order to simulate long-term ageing in real lean-burn natural gas fuelled vehicles (NGVs) exhaust conditions. Without water or H₂S added to the feed, Pd catalysts exhibit a superior catalytic activity in methane oxidation compared to Pt ones, whatever the catalysts were fresh or aged. The addition of 10 vol.% water vapour to the feed strongly affects the activity of the fresh Pd catalyst, thus being only slightly more efficient than the fresh Pt one. H₂S has a strong poisoning effect on the catalytic activity of Pd catalysts, while Pt catalysts are more resistant. The fresh H₂S-poisoned Pd/Al₂O₃ catalyst was studied by TPD in O₂/He. Poisoning species decompose above 873 K as SO₂ and O₂ in relative concentrations consistent with the decomposition of surface sulphate species. However, a treatment in O₂/He at temperatures as high as 923 K does not allow the complete regeneration of the catalytic activity of H₂S-poisoned Pd/Al₂O₃. A mechanism involving the poisoning of PdO by sulphate species is proposed. Different diffusion processes by which these sulphate species can migrate back and forth between PdO and the support, depending on the experimental conditions, are suggested.     

Combined PIXE and SEM study of the behaviour of trace elements in gel formed around implant coated with bioactive glass

Bioactive glasses are used as coating biomaterials to facilitate anchorage of metallic prostheses implanted into the body. The aim of this work is to study the behavior of gel formed in contact with alloys and BVA and BVH bioactive glasses implanted. Cylinders of metallic implants composed by Ti, Al and V, are coated with bioactive glass. Three sheep were implanted for different time length: 3, 6 and 12 months in the femoral epiphysis. Results obtained with particle induced X-ray emission and scanning electron microscopy show that BVA coating induces a better contact between the metallic implant and bone. On the other hand, BVH coating prevents corrosion from the metallic implant.     

Fourier-transform-limited pulses from gain-switched distributed-Bragg-reflector lasers using simultaneous modulation of gain and phase sections

Fourier-transform-limited pulses ( Delta tau . Delta nu approximately=0.35) have been obtained from a microwave-modulated DBR laser at 1.56 mu m. The chirp of the gain-switched pulse is compensated for by applying a fraction of the microwave signal to the phase section, thereby creating an instantaneous frequency shift of opposite sign. The generation of short coherent pulses from such a monolithic source can be of great interest for long haul soliton transmission.<>     

Golden interfaces: The Surface of Self-Assembled Monolayers

Self-assembled monolayers (SAMs) of alkanethiols and disulfides on gold form organic interfaces with properties largely controlled by the end groups of the molecules composing the film. SAMs provide a unique link between the science of organic surfaces and technologies that seek to exploit their adaptable character. Many techniques are useful for probing the structure of SAMs although only scanning tunneling microscopy (STM) at picoamperes reveals the details of the packing of their end groups at the sub-angstrom level. This review demonstrates that STM effectively tests new types of control over the microscopic structure–property relationships characteristic of SAMs on gold that should prove useful to their application.     

Part II: An example of the use of the comsis software: simulation of an optical network which uses wavelength multiplexing,fsk modulation format and direct detection

This second article deals with using the Comsis software for a particular application. Simulation is used to determine the maximum channel density in presence of crosstalk. In a first part, the modelling of the system is described. The simulation parameters of different optical elements are given. The results show that in the case of channels modulated at 500 Mbitls using fsk modulation format, and a direct detection operation at 1,5 μm, a minimum spacing of 6 GHz can be obtained with a 2 dB penalty. Thus if only the bandwidth of the erbium doped fibre amplifier is taken into account, the maximum number of channels which can be used is 250. However if the fsr (free spectral range) of optical filter is taken into account, the maximun number of channels is limited to 30.