Dynamical modelling of an activated sludge system of a petrochemical plant operating at high temperatures.

The Mexican petrochemical industry, Morelos S.A. de C.V., is one of the biggest and more important petroleum industries in Mexico and Latin America. It has an activated sludge system to treat its wastewater flow, which is approximately 7,000 m3/d. The wastewater contains volatile organic carbon substances classified as toxics. The old surface aeration system was changed for fine bubble diffusers; however, one major drawback of the new aeration system is that the temperature in the bioreactor has increased due to the compression of the air, which at the compressor exit reaches 85 degrees C. This effect results in the temperature in the bioreactor attaining 32 degrees C during the fall, whereas in the spring and summer, the bioreactor temperature reaches higher values than 40 degrees C. The high temperatures reduce the microorganism activity and cause a higher volatilisation rate of volatile compounds, among other effects, which affect the performance of the biological treatment. This work was performed to obtain a better modelling of the wastewater treatment from the petrochemical industry. The model describes the effect of the temperature on the performance of the biological treatment. The model was obtained from tests that were carried out in laboratory reactors with 14 L capacity, which were operated at different temperatures (from 30 to 45 degrees C), with the same wastewater and conditions as the actual system.     

Temperature effects on the mass flow rate in the SBI and similar heat‐release rate test equipment

In various medium‐to‐large‐scale fire test equipments like the ISO room corner test (RC), and more recently, the single burning item test (SBI) the mass flow rate measurement of the combustion gases plays a key role in the determination of the heat‐release rate and smoke‐production rate. With the knowledge of the velocity profile and the temperature of the flow, the mass flow rate is obtained by measuring the velocity on the axis of the duct. This is done by means of a bi‐directional probe based on the pitot principle. However, due to the variation of the mean temperature and the temperature gradient in any cross section of the duct, introduced by ever changing combustion gas temperatures, the velocity nor the density profile are constant in time. This paper examines the resulting uncertainty on the mass flow rate. Copyright © 2006 John Wiley & Sons, Ltd.     

Complement resistance of capsulated strains of Aeromonas salmonicida

1. We investigated the effect of exercise on plasma adrenomedullin, atrial natriuretic peptide (ANP) and brain natriuretic peptide (BNP) concentrations and studied the relationship between these peptides and haemodynamic parameters in nine patients with old myocardial infarction (MI) and in eight normal subjects. 2. The exercise protocol consisted of two fixed work loads (40 and 80 W) for 4 min each and venous blood samples were taken at rest, during each exercise stage and after exercise while monitoring the mean arterial pressure (MAP) and heart rate (HR). In MI, pulmonary arterial pressure (PAP), pulmonary capillary wedge pressure (PCWP), left ventricular end-diastolic pressure (LVEDP) and cardiac output (CO) were measured throughout exercise. 3. Adrenomedullin levels did not significantly increase with exercise. Adrenomedullin levels correlated with PAP and PCWP at rest (P < 0.05). Atrial natriuretic peptide levels correlated with PAP, PCWP and LVEDP throughout exercise (P < 0.05) but, on multiple regression analysis, PCWP correlated only with ANP (P < 0.01). Brain natriuretic peptide levels correlated with LVEDP throughout exercise (P < 0.01) and its increment correlated closely with basal BNP levels at rest (P < 0.01). 4. These results suggest that adrenomedullin does not respond to the acute haemodynamic changes of exercise, whereas ANP responds to it and PCWP is the major stimulus factor. Brain natriuretic peptide responds to exercise in proportion to the basal synthesis of BNP in patients with left ventricular dysfunction and LVEDP may play a role in increasing BNP during exercise.     

A survey on the occurrence of Fusarium mycotoxins in Bavarian cereals from the 1987 harvest

Summary Bavarian cereals and wheat flour from the 1987 harvest were analysed for nivalenol (NIV) and deoxynivalenol (DON) using high performance liquid chromatography (HPLC) and for T-2 toxin and zearalenone (ZEA) by enzyme-linked-immunosorbent as say (ELISA). The study included 190 field samples of wheat, barley, rye and oat with visibly damaged ears, 45 samples of wheat intended for feed production and two series of wheat flour (type 550) and whole wheat flour collected in October 1987 and June 1988. The field samples examined showed a high DON contamination of wheat (87%) with an average of 3.96 mg/kg and a maximum of 43.8 mg/kg. Mean levels between 0.33 mg/kg and 0.27 mg/kg DON could be detected in barley, rye and oat. Of the wheat samples, 58% contained ZEA with a maximum of 1.560 mg/kg. The highest levels of ZEA were detected in samples which also showed high concentrations of DON. The NIV and T-2 toxin levels were comparatively low. Thirty percent of the samples showed NIV concentrations between 0.04 mg/kg and 0.29 mg/kg and 38% contained between 0.005 and 0.60 mg/kg of T-2. In the wheat samples for feed production, only DON was detected with an average of 0.190 mg/kg and a maximum of 0.75 mg/kg. The highest DON levels (0.58 mg/kg) from October 1987 were found in the wheat flour samples which were lower than the highest DON concentration (3.24 mg/kg) detected in the samples collected during June 1988. This fact was probably due to a substantial amount of non-contaminated wheat from 1986. The toxin concentrations in the whole wheat flour were not higher than in the type 550 flour. The regional distribution of the mean DON concentrations showed the highest levels in Middle and Lower-Franconia.

---

Vorkommen von Fusarium Mykotoxinen in bayerischem Getreide der Ernte 1987

Zusammenfassung Cerealien und Weizenmehle der bayerischen Ernte 1987 wurden mittels hochauflösender Flüssigchromatographie (HPLC) auf Nivalenol (NIV) und Deoxynivalenol (DON) Bowie mit Enzymimmunoassay auf T-2 Toxin und Zearalenon (ZEA) analysiert. Die Untersuchungen umfaßten 190 Feldproben von Weizen, Gerste, Roggen und Hafer, die alle optisch erkennbaren Fusarienbefall aufwiesen, 45 Futterweizenproben Bowie zwei Probenserien von Weizenmehlen der Type 550 und Vollkornweizenmehlen, die im October 1987 und im Juni 1988 gezogenwurden. — Die Untersuchungen der Feldproben ergaben eine hohe DON-Kontamination des Weizens (87%) mit einem durchschnittlichen Gehalt von 3,96 mg/kg und einem Maximalgehalt von 43,8 mg/kg. In Gerste, Roggen und Hafer konnten durchschnittlich zwischen 0,33 mg/kg und 0,27 mg/kg DON-nachgewiesen werden. 58% der Winterweizenproben wiesen Zearalenon mit einem Maximalgehalt von 1,56 mg/kg auf. Die höchsten ZEA-Werte wurden in Proben ermittelt, die gleichzeitig einen hohen DON-Gehalt aufwiesen. Die Konzentrationen von NIV und T-2 Toxin waren vergleichsweise niedrig. 30% der Proben hatten NIV-Gehalte zwischen 0,04 mg/kg und 0,29 mg/kg und 38% enthielten T-2 Toxin zwischen 0,005 mg/kg und 0,06 mg/kg. In den Futterweizenproben konnte DON als einziges Toxin mit einem Gehalt von durchschnittlich 0,19 mg/kg und maximal 0,75 mg/kg festgestellt werden. Die Weizenmehle, die im October 1987 gezogen wurden, wiesen maximal 0,58 mg/kg DON auf. Die Gehalte lagen damit medriger als die der Mehlproben vom Juni 1988, die maximal 3,24 mg/kg und durchschnittlich 0,26 mg/kg DON enthielten. Dieser Sachverhalt könnte auf Anteile von nicht kontaminiertem Weizen der Ernte 86 an den im October gezogenen Mehlproben zurückgeführt werden. Die Toxingehalte der Vollkornmehle waren nicht höher als die der Weizenmehle der Type 550. Die höchsten Durchschnittsgehalte von DON wurden in Mittel- und Unterfranken festgestellt.

     

Thickness-stress relations in aluminum thin films

The physical properties of aluminum thin films depend strongly on their microstructure, which can be characterized using different techniques. In the present work, aluminum thin films—grown with different thickness on silicon substrates—were analyzed by atomic force microscopy (AFM) and grazing incidence x-ray techniques. The AFM was used as a high-resolution profilemeter for measuring edge angles, step heights, surface microstructure, and roughness. The structural properties (such as crystallographic orientation, crystallite size, and phase identification) were analyzed by grazing incidence x-ray diffraction. For small thickness, AFM images show small nucleation sites because of the short time of growth. Grain size grows as the thickness increases, and film morphology seems to be uniform with large grains. The AFM results of as-grown films show a linear increase in roughness along with thickness. Roughness values decrease with aging time after film preparation, until a constant value is observed. All films mainly have (111) orientation, and its intensity grows with film thickness, with respect to the (200) and (220) peaks. As the film thickness increases, the surface stress decreases.     

The influence of the ion content of whey on the pH-activity profile of the β-galactosidase from Aspergillus oryzae

The pH-dependence of the reaction kinetics of lactase (β-galactosidase) from Aspergillus oryzae in different reaction media is presented in terms of a two-parameter model. The lactase from A. oryzae seems to have replaced the A. niger lactase on the market owing to a better activity/price ratio and may be utilised for lactose hydrolysis in acid as well as in neutral milk products. Its pH optimum is around pH 4.5. However, in the neutral pH-range its activity depended strongly on the salt content of the substrate solution. For example, its activity in whey (pH 6.5) fell to only 30% of its expected activity in a pure lactose solution at the same pH. The whey effect was the same for both soluble and immobilised lactase. The two parameter kinetic model, which included a term for competitive product inhibition gave excellent agreement with experimental data, and may thus be useful for the prediction of reactor performance with this enzyme.     

Electron-phonon coupling in A3C60: Contributions from intermolecular modes

An accurate tight-binding fit to the full valence-conduction band region in K₃C₆₀ is used to generate deformation potentials for several phonon modes, including the optic intermolecular vibrations and librations that have not been investigated previously. The resulting electron-phonon coupling constants indicate coupling that is likely to be crucial in understanding electronic transport in the fullerides, and will provide contributions to superconducting pairing. Results for the intramolecularA _g (2) “pentagonal pinch” mode suggests nonadiabatic behavior for this (and possibly other) very high frequency modes.     

Effects of Plasmodium berghei infection on arteether metabolism and disposition

Arteether (AE) is primarily deethylated to dihydroqinghaosu (DQHS) in rats and humans. Conversion of AE to DQHS was impaired in microsomes from rats infected with Plasmodium berghei. The Km for AE was 175.1 +/- 49.1 and 124.4 +/- 115.1 mumol/l, and Vmax was 2.24 +/- 0.45 and 1.22 +/- 0.67 nmol AE formed/mg protein/min in control and infected microsomes (p < 0.05), respectively. Calculated intrinsic clearance (CLint = initial Vmax/Km) for AE was only 4% lower in infected microsomes. Apparent pharmacokinetic parameter estimates for AE using the isolated perfused rat liver demonstrated no differences (p > 0.05) in volume of distribution, clearance, and half-life between normal and infected animals. Malaria infection resulted in decreased biliary excretion of free AE and DQHS. The majority of AE is eliminated via biliary excretion of conjugated DQHS, which is approximately 500-fold higher than free DQHS and 75-fold higher than free AE on a molar basis.