Synthesis of amphiphilic (meth)acrylates with oligo(ethylene glycol) and (or) oligo(propylene glycol) blocks by the esterification of (meth)acrylic acid

Thermoresponsive PEG-based (PEG stands polyethylene glycol) polymers are unique for use in medicine because of their low toxicity, good biocompatibility and biodegradability, but usually more hydrophobic and more toxic comonomers are used to adjust lower critical solution temperature (LCST). A convenient way to overcome this problem and to finely tune LCST is to use alkoxy oligo(ethylene glycol)- or alkoxy oligo(propylene glycol) (meth)acrylates as starting comonomers. Here we report on the conditions for the simple and affordable synthesis of methoxy oligo(propylene glycol) (meth)acrylate- and methoxy oligo(propylene glycol)-block-oligo(ethylene glycol) (meth)acrylate-based macromonomers with high yields (80%–98.7%) by the acid-catalyzed esterification of (meth)acrylic acid with alkoxy oligo(alkylene glycols) containing oligo(ethylene glycol) (OEG) and/or oligo(propylene glycol) (OPG) blocks. p-Toluene sulphonic acid (pTSA), alkyl(C₁₂–C₁₄)benzene sulfonic acid (ABSA) and H₂SO₄ were used as catalysts. It has been shown that pTSA and ABSA are practically the same in catalytic activity and are superior to sulfuric acid. The reaction orders with respect to catalyst was found to be close to 1 in all cases. It has been shown that the reaction is actually insensitive to the lengths of OEG and OPG blocks, as well as to the structure of the terminal alkyl group, while the esterification of acrylic acid (AA) proceeds much faster compared to methacrylic acid (MAA) one under the same conditions. The influence of temperature on the equilibrium conversions of alcohols was determined, which were found to be 89%–93% for the esterification of AA and 61%–86% for MAA in the temperature range of 60–120°C. A further increase in conversion was achieved by introducing an azeotropic agent (toluene), its optimal concentration was found to be 10%–15%.     

Transduction of Brain Neurons in Juvenile Chum Salmon (Oncorhynchus keta) with Recombinant Adeno-Associated Hippocampal Virus Injected into the Cerebellum during Long-Term Monitoring

Corpus cerebelli in juvenile chum salmon is a multiprojective region of the brain connected via afferent and efferent projections with the higher regions of the brainstem and synencephalon, as well as with multiprojection regions of the medulla oblongata and spinal cord. During the postembryonic development of the cerebellum in chum salmon, Oncorhynchus keta, the lateral part of the juvenile cerebellum gives rise to the caudomedial part of the definitive cerebellum, which is consistent with the data reported for zebrafish and mouse cerebellum. Thus, the topographic organization of the cerebellum and its efferents are similar between fish (chum salmon and zebrafish) and mammals, including mice and humans. The distributions of recombinant adeno-associated viral vectors (rAAVs) after an injection of the base vector into the cerebellum have shown highly specific patterns of transgene expression in bipolar neurons in the latero-caudal lobe of the juvenile chum tectum opticum. The distribution of rAAVs in the dorsal thalamus, epithalamus, nucleus rotundus, and pretectal complex indicates the targeted distribution of the transgene via the thalamo-cerebellar projections. The detection of GFP expression in the cells of the epiphysis and posterior tubercle of juvenile chum salmon is associated with the transgene’s distribution and with the cerebrospinal fluid flow, the brain ventricles and its outer surface. The direct delivery of the rAAV into the central nervous system by intracerebroventricular administration allows it to spread widely in the brain. Thus, the presence of special projection areas in the juvenile chum salmon cerebellum, as well as outside it, and the identification of the transgene’s expression in them confirm the potential ability of rAAVs to distribute in both intracerebellar and afferent and efferent extracerebellar projections of the cerebellum.     

Stability of the austenite lattice of a high-nickel iron-based alloy toward the martensitic transformation

First-principles calculations of the variation of the total energy of a ferromagnetic Fe-31.2% Ni alloy upon bainitic transformation are presented. The problem of the loss of stability of the fcc lattice of iron alloys is discussed to show that the fcc lattice is mechanically stable in this alloy.     

Raman scattering of InAs/AlAs quantum dot superlattices grown on (001) and (311)B GaAs surfaces

ABSTRACT: We present a comparative analysis of Raman scattering by acoustic and optical phonons in InAs/AlAs quantum dot superlattices grown on (001) and (311)B GaAs surfaces. Doublets of folded longitudinal acoustic phonons up to the fifth order were observed in the Raman spectra of (001)- and (311)B-oriented quantum dot superlattices measured in the polarized scattering geometries. The energy positions of the folded acoustic phonons are well described by the elastic continuum model. Besides the acoustic phonons, the spectra display features related to confined transverse and longitudinal optical as well as interface phonons in quantum dots and spacer layers. Their frequency positions are discussed in terms of phonon confinement, elastic stress, and atomic intermixing.     

Novel (phenylethynyl)pyrene-LNA constructs for fluorescence SNP sensing in polymorphic nucleic acid targets

We describe fluorescent oligonucleotide probes labeled with novel (phenylethynyl)pyrene dyes attached to locked nucleic acids. Furthermore, we prove the utility of these probes for the effective detection of single-nucleotide polymorphisms in natural nucleic acids. High-affinity hybridization of the probes and excellent fluorescence responses to single-base mismatches in DNA/RNA targets are demonstrated in model dual-probe and doubly labeled probe formats. This stimulated us to develop two diagnostic systems for the homogeneous detection of a drug-resistance-causing mutation in HIV-1 protease cDNA and RNA gene fragments. Target sequences were obtained by analysis of 200 clinical samples from patients currently receiving anti-HIV/AIDS combination therapy at the Russian Federal AIDS Center. Using these fluorescent oligonucleotides, we were able to detect the target mutation despite all the challenges of the natural targets, that is, the presence of additional mutations, neighboring sequence variation, and low target concentration, which typically reduce binding and effectiveness of sensing by fluorescent oligonucleotides.     

Intensification of the processes of dehydrogenation and dewaxing of middle distillate fractions by redistribution of hydrogen between the units

The dehydrogenation and dewaxing of hydrocarbons of middle-distillate fractions, which proceed in the hydrogen medium, are of great importance in the petrochemical and oil refining industries. They increase oil refining depth and allow producing gasoline, kerosene, and diesel fractions used in the production of hydrocarbon fuels, polymer materials, synthetic detergents, rubbers, etc. Herewith, in the process of dehydrogenation of hydrocarbons of middle distillate fractions (C₉–C₁₄) hydrogen is formed in the reactions between hydrocarbons, and the excess of hydrogen slows the target reaction of olefin formation and causes the shift of thermodynamic equilibrium to the initial substances. Meanwhile, in the process of hydrodewaxing of hydrocarbons of middle distillate fractions (C₅–C₂₇), conversely, hydrogen is a required reagent in the target reaction of hydrocracking of long-chain paraffins, which ensures required feedstock conversion for production of low-freezing diesel fuels. Therefore, in this study we suggest the approach of intensification of the processes of dehydrogenation and dewaxing of middle distillate fractions by means of redistribution of hydrogen between the two units on the base of the influence of hydrogen on the hydrocarbon transformations using mathematical models. In this study we found that with increasing the temperature from 470 °C to 490 °C and decreasing the hydrogen/feedstock molar ratio in the range of 8.5/1.0 to 6.0/1.0 in the dehydrogenation reactor, the production of olefins increased by 1.45–1.55%wt, which makes it possible to reduce hydrogen consumption by 25,000 Nm³/h. Involvement of this additionally available hydrogen in the amount from 10,000 to 50,000 Nm³/h in the dewaxing reactor allows increasing the depth of hydrocracking of long-chain paraffins of middle distillate fractions, and, consequently improving low-temperature properties of produced diesel fraction. In such a way cloud temperature and freezing temperature of produced diesel fraction decrease by 1–4 °C and 10–25 °C (at the temperature of 300 °C and 340 °C respectively). However, when the molar ratio hydrogen/hydrocarbons decreases from 8.5/1.0 to 6.0/1.0 the yield of side products in the dehydrogenation reactor increases: the yield of diolefins increases by 0.1–0.15%wt, the yield of coke increases by 0.07–0.18%wt depending on the feedstock composition, which is due to decrease in the content of hydrogen, which hydrogenates intermediate products of condensation (the coke of amorphous structure). This effect can be compensated by additional water supply in the dehydrogenation reactor, which oxidizes the intermediate products of condensation, preventing catalyst deactivation by coke. The calculations with the use of the model showed that at the supply of water by increasing portions simultaneously with temperature rise, the content of coke on the catalyst by the end of the production cycle comprises 1.25–1.56%wt depending on the feedstock composition, which is by 0.3–0.6%wt lower that in the regime without water supply.     

A New Tensorial Framework for Single-Shell High Angular Resolution Diffusion Imaging

Single-shell high angular resolution diffusion imaging data (HARDI) may be decomposed into a sum of eigenpolynomials of the Laplace-Beltrami operator on the unit sphere. The resulting representation combines the strengths hitherto offered by higher order tensor decomposition in a tensorial framework and spherical harmonic expansion in an analytical framework, but removes some of the conceptual weaknesses of either. In particular it admits analytically closed form expressions for Tikhonov regularization schemes and estimation of an orientation distribution function via the Funk-Radon Transform in tensorial form, which previously required recourse to spherical harmonic decomposition. As such it provides a natural point of departure for a Riemann-Finsler extension of the geometric approach towards tractography and connectivity analysis as has been stipulated in the context of diffusion tensor imaging (DTI), while at the same time retaining the natural coarse-to-fine hierarchy intrinsic to spherical harmonic decomposition.     

Synthesis and characterization of C60‐based composites of amphiphilic N‐vinylpyrrolidone/triethylene glycol dimethacrylate copolymers

It was found that under mixing of aqueous solutions of copolymers and toluene solutions of C₆₀ two types of polymer composites can be produced with different matrix structure, the fullerene content and an aggregation degree. The dimethacrylate enriched macromolecules migrate to toluene and the VP units enriched copolymer chains remain in water to form copolymer micelles and their aggregates in these media that solubilize and encapsulate the fullerene. The structure and properties of obtained polymer composites were studied by GPC with dual detection (RI and MALLS), FT‐IR, WAXS and SAXS methods. It is shown that in a composite based on N‐vinylpyrrolidone copolymer isolated from toluene the fullerene form larger particles, compare to that isolated from water. According to SAXS, the fullerene particles in a solid copolymer are organized in spherical objects with fine coil‐like structure. The stability of the composites in water, ethanol, and chloroform was shown to depend on the original polymer matrix structure and on copolymer/fullerene ratio. POLYM. COMPOS., 35:1362–1371, 2014. © 2013 Society of Plastics Engineers     

Ultra-Robust Flexible Electronics by Laser-Driven Polymer-Nanomaterials Integration

Polyethylene terephthalate (PET) is the most widely used polymer in the world. For the first time, the laser-driven integration of aluminum nanoparticles (Al NPs) into PET to realize a laser-induced graphene/Al NPs/polymer composite, which demonstrates excellent toughness and high electrical conductivity with the formation of aluminum carbide into the polymer is shown. The conductive structures show an impressive mechanical resistance against >10000 bending cycles, projectile impact, hammering, abrasion, and structural and chemical stability when in contact with different solvents (ethanol, water, and aqueous electrolytes). Devices including thermal heaters, carbon electrodes for energy storage, electrochemical and bending sensors show this technology's practical application for ultra-robust polymer electronics. This laser-based technology can be extended to integrating other nanomaterials and create hybrid graphene-based structures with excellent properties in a wide range of flexible electronics’ applications.