Design of bandpass–bandpass diplexers using rectangular-, T-, and L-shaped resonators for hybrid power amplifier and 5G applications

Analog Integrated Circuits and Signal Processing - In this paper, two bandpass–bandpass diplexers, based on L-, T- and rectangular-shaped resonators are designed and analyzed, which are used...     

Output feedback controller for polytopic systems exploiting the direct searching of the design space

This paper deals with the problem of designing a robust static output feedback controller for polytopic systems. The current research that tackled this problem is mainly based on LMI method, which is conservative by nature. In this paper, a novel approach is proposed, which considers the design space of the controller parameters and iteratively partitions the space to small simplexes. Then, by assessing the stability in each simplex, the solution space for design parameters is directly determined. It has been theoretically proved that, if there exists a feasible solution in the design space, the algorithm can find it. To validate the result of the proposed approach, comparative simulation examples are given to illustrate the performance of the design methodology as compared to those of previous approaches.     

Behavior of 316L stainless steel containing corrosion pits under cyclic loading

The environmental performance of 316L grade stainless steel, in the form of tensile specimens containing a single corrosion pit with various aspect ratios, under cyclic loading in aerated chloride solutions is investigated in this study. Results from environmental tests were compared and contrasted with those obtained using finite element analysis (FEA). Fractography of the failed specimens obtained from experiments revealed that fatigue crack initiation took place at the base of the shallow pit. The crack initiation shifted towards the shoulder and the mouth of the pit for pits of increasing depth. This process is well predicted by FEA, as the strain contour maps show that strain is the highest around the centric strip of the pit. However, for shallow pits, local strain is uniformly distributed around that strip but begins to concentrate more towards the shoulder and the mouth region for increasingly deep pits.     

Introduction

The Journal of Supercomputing -     

Fully Petrov–Galerkin spectral method for the distributed-order time-fractional fourth-order partial differential equation

Distributed fractional derivative operators can be used for modeling of complex multiscaling anomalous transport, where derivative orders are distributed over a range of values rather than being just a fixed integer number. In this paper, we consider the space-time Petrov–Galerkin spectral method for a two-dimensional distributed-order time-fractional fourth-order partial differential equation. By applying a proper Gauss-quadrature rule to discretize the distributed integral operator, the problem is converted to a multi-term time-fractional equation. Then, the proposed method for solving the obtained equation is based on using Jacobi polyfractonomial, which are eigenfunctions of the first kind fractional Sturm–Liouville problem (FSLP), as temporal basis and Legendre polynomials for the spatial discretization. The eigenfunctions of the second kind FSLP are used as temporal basis in test space. This approach leads to finding the numerical solution of the problem through solving a system of linear algebraic equations. Finally, we provide some examples with smooth solutions and finite regular solutions to numerically demonstrate the efficiency, accuracy, and exponential convergence of the proposed method.

     

Correlation of reactivity with chemical structure: Thermal hydrogenation of gas oils

The relationship between chemical structure and reactivity for thermal hydroprocessing was studied for five gas oils derived from Alberta bitumens. Chemical structure was characterized by combining data from ¹ H and ¹³ C nuclear magnetic resonance spectroscopy, class fractionation, and elemental analysis to calculate structural parameters. Thermal hydrotreating was performed in a continuous-flow stirred reactor at 420 and 440°C, 13.9 MPa hydrogen pressure, and 1.5 h¹ LHSV. Conversion of the 343–525°C boiling fraction of the gas oils was correlated with the concentration of naphthenic methylene groups in the feed. Formation of methane and ethane was dependent on the degree of condensation of the aromatic rings in the feed oils. Thermal desulfurization was highly correlated with the amount of saturates in the feed, and the aromaticity of the resin fraction. Hydrogen consumption increased with the aromaticity of the gas oil…     

Multicast routing protocols in wireless mesh networks: a survey

Wireless mesh networks (WMNs) introduce a new type of network that has been applied over the last few years. One of the most important developing issues in WMNs is multicast routing, which is a key technology that provides dissemination of data to a group of members in an efficient way. In this article, after an introduction about the structure of a WMN, multicast routing algorithms and protocols in WMNs are surveyed in a detailed and efficient manner. Moreover, effort is made to scale the study into one of the important potential capabilities of multicast routing mechanisms in WMNs, which is taking advantage of using different channels and radios association. While nodes in a single-radio mesh network operating on single-channel have restrictions for capacity, equipping mesh routers with multiple radios using multiple channels can decrease the intention of capacity problem as well as increase the aggregate bandwidth available to the network and improving the throughput. Hence, the purpose of channel assignment is to decrease the interferences while increasing the network capacity and keeping the connectivity of the network. Therefore, this article investigates the multicast protocols considering a definition of three types of WMNs, based on channel-radio association including SRSC, SRMC and MRMC. In its follow, a classification for multicast routing algorithms regarding the achieved optimal solutions will be presented. Finally, a study of MRMC and its relevant problems will be offered, considering the joint channel assignment and the multicast tree construction problem.     

Multi-Wavelength vs. Binary Code Pattern Unwrapping in Fringe Projection Method

Phase extraction, phase unwrapping and phase to height conversion are consecutive steps within the fringe projection method for reconstruction of 3D objects. The procedure of determining discontinuities on the wrapped phase, resolving them and achieving the unwrapped phase is called phase unwrapping. A software system was developed that provides the ability to create many kinds of patterns with a verity of desirable properties suitable for different demands in fringe projection systems. In our previous work, an experimental study was reported based on a multi-wavelength unwrapping approach. In the following work, we implemented a new method called binary code pattern unwrapping that is based on time analysis. A comparison of the two unwrapping approaches in terms of resolution, quality, noise, depth accuracy, and computational cost is provided.     

Design of explicit model predictive control for constrained linear systems with disturbances

On-line model predictive control approaches require the online solution of an optimization problem. In contrast, the explicit model predictive control moves major part of computation offline. Therefore, eMPC enables one to implement a MPC in real time for wide range of fast systems. The eMPC approach requires the exact system model and results a piecewise affine control law defined on a polyhedral partition in the state space. As an important limitation, disturbances may reduce performance of the explicit model predictive control. This paper presents efficient approach for handling the problem of using eMPC for constrained systems with disturbances. It proposes an approach to improve performance of the closed loop system by designing a suitable state and disturbance estimator. Conditions for observability of the disturbances are considered and it is depicted that applying the disturbance’s estimation leads to rejection of the response error. It is also shown that the proposed approach prevents the reduction of feasible space. Simulation results illustrate the advantages of this approach.     

X-ray Photoelectron Spectroscopy of Cadmium Tin Oxide Ceramics in As-Fired and Electrochemically Reduced Forms

X-ray photoelectron spectroscopy (XPS) has been employed to investigate the chemical nature of samples of dicadmium stannate (Cd₂SnO₄) in the as-fired, electrochemically reduced, and reoxidized states. The reduction of Cd₂SnO₄ was found to be associated with a dramatic color change from bright yellow to dark green, a phenomenon commonly known as the electrochromic effect. Both quantitative XPS results and binding energy measurements proved that, upon exposure of the reduced ceramic bodies to air, the Sn²⁺ to Sn⁴⁺ transition readily took place to produce the intermediate compound, Cd₂SnO₃ with divalent tin. Prolonged exposure to the atmosphere did not result in further progress of reoxidation extending to monovalent cadmium. However, complete reoxidation of the reduced samples was possible by annealing in air at 350°C for a short period of time, e.g., 3 h, by which the original features of the as-fired state such as color and electrical conductivity were restored. The results also showed that reoxidized samples at high temperature assume the same XPS characteristics as those of as-fired ceramics.