Miscibility behavior of blend of polyesteramides of linseed oil and dehydrated castor oil with poly(methacrylic acid)

Blending of two polymers in solution is a simple and cost‐effective technique to improve upon the physical and mechanical properties of the component polymers through synergism. To obtain maximum synergy in their properties, the component polymers should be miscible with each other on molecular scale. Polymer blends of complex physicomechanical properties are being actively investigated. Poly(methacrylic acid) (PMAA), a commercial polymer, yields transparent, hard, brittle, and water‐sensitive films. It has been blended with natural polymers like dextran, collagen, and gelatin to obtain films with improved physical and mechanical characteristics. Polyesteramides, which are easily synthesized from vegetable seeds oil, a sustainable resource, have found application in surface coatings. These oligomeric products do not make free standing films in the ambient condition. The polyesteramides from vegetable seeds oil can be used to obtain blend with PMMA of improved mechanical and water absorption properties. In this study, linseed oil polyesteramide (LOPEA) and dehydrated castor oil polyesteramide (DCPEA), the source oils with different unsaturation in their fatty acid chains, were blended with PMAA through mixing in solution in the ratio DCPEA/LOPEA: PMAA as 80/20, 70/30, 60/40, 50/50, 40/60, 30/70, and 20/80. In the first instance, the miscibility of the two components was investigated in solution by viscosity and ultrasonic measurements and in solid phase through differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Moisture absorption by the blend was also studied. DCPEA and LOPEA show immiscibility with PMAA in solution phase while LOPEA with more unsaturation in the fatty acid chain of the oil was found more immiscible than DCPEA. DCPEA shows a narrow miscibility window in the solid phase while LOPEA was found immiscible with PMAA in the solid phase too. Uptake of moisture was found to be markedly reduced in the blends of DCPEA/LOPEA with PMAA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1367–1374, 2007:     

Input-parallel output-parallel configuration of boost half bridge DC-DC converter with control strategy

The concept of connecting two boost half bridge DC-DC converter modules in input-paral- lel output-parallel configuration is presented. The input-parallel-output-parallel （IPOP） converter consists of multiple boost half bridge （BHB） DC-DC converter modules which are connected in par- allel at the input and output side. This kind of converter is an attractive solution for high power ap- plications. The correlation between input current sharing （ICS） and output current sharing （OCS） of the IPOP converter basic modules is described. Two loop control strategies, consisting of input cur- rent loop and output voltage loop, have been developed to achieve equal ICS and OCS in this present work. The control strategy for the IPOP configuration of boost haft bridge DC-DC converter has been verified for different load conditions （half load and full load）, The IPOP system proposed here is comprising of two modules but it can be extended to three or more. The performance of the pro- posed system along with the control strategy is verified by simulation in MATLAB using Simpower tool. Finally the satisfactory simulation results are obtained.     

Siting park-and-ride facilities using a multi-objective spatial optimization model

Park-and-ride services are an important component of many public transportation systems in the United States. Locating park-and-ride facilities is an essential step when planning for these services. In this research we focus on three major siting/modeling concerns that need to be addressed when siting park-and-ride facilities: covering as much potential demand as possible, locating park-and-ride facilities as close as possible to major roadways, and siting such facilities in the context of an existing system. Unfortunately, existing models do not enable each of these concerns to be simultaneously addressed. This paper presents a multi-objective spatial optimization model for integrating these considerations. This model is applied for siting park-and-ride facilities in Columbus, Ohio. Application results show the usefulness of the developed model in supporting transit planning in an urban region.     

Giant Anomalous Hall and Nernst Conductivities in Magnetic All-d Metal Heusler Alloys

All-d Heuslers are a category of novel compounds combining versatile functionalities such as caloric responses and spintronics with enhanced mechanical properties. Despite the promising transport properties (anomalous Hall (AHC) and anomalous Nernst (ANC) conductivities) shown in the conventional Co₂XY Heuslers with p-d hybridization, the all-d Heuslers with only d-d hybridization open a new horizon to search for new candidates with outstanding transport properties. In this work, the AHC and ANC are evaluated for thermodynamically stable ferro/ferri-magnetic all-d-metal regular Heusler compounds based on high-throughput first-principles calculations. It is observed that quite a few materials exhibit giant AHCs and ANCs, such as cubic Re₂TaMn with an AHC of 2011 S cm^-1, and tetragonal Pt₂CrRh with an AHC of 1966 S cm^-1 and an ANC of 7.50 A m^-1K^-1. Comprehensive analysis on the electronic structure reveals that the high AHC can be attributed to the occurrence of the Weyl nodes or gapped nodal lines in the neighborhood of the Fermi level. The correlations between such transport properties and the number of valence electrons are also thoroughly investigated, which provides a practical guidance to tailor AHC and ANC via chemical doping for transverse thermoelectric applications.     

On the performance of different capability indices under normal and non-normal distributions

In this article, we have examined the performance of some useful capability indices using normal and non-normal distributions. The confidence intervals are calculated and mean coverage rates are observed for different capability indices. The effects of symmetry and kurtosis of parent distributions are examined on the mean coverage rates of different capability indices. Moreover, we have investigated the robustness (of confidence interval) using the median and percentile-based indices. We have considered the well-known distributions including normal, gamma, t, Weibull, and chi-squared. For these process scenarios, we have observed that some indices resist disturbance only in symmetry of the parent distribution, some resist the disturbance in symmetry and kurtosis of the distribution, and some indices don’t resist against either type of disturbance.     

On the Efficiency of Runs Rules Schemes for Process Monitoring

There are two main types of variations, namely, common and special causes leading to in‐control and out‐of‐control states, respectively. Control charts are popular tools used to differentiate between these two states of a process. Implementation of runs rules schemes with control charts is an attractive approach for process monitoring. This study is designed to describe the methodology of runs rules schemes and discuss their implementation for different types of control charts. We have considered memory‐less charts, namely, , S, and R charts for our study purposes. It is examined that the efficiency gain depends on the number of decision points utilized to implement a given rule. Moreover, superiority of runs rules schemes may vary for different types of location and dispersion charts. An application example using a dataset is also included in the study for practical considerations. Copyright © 2015 John Wiley & Sons, Ltd.     

A New Combined Shewhart–Cumulative Sum S Chart for Monitoring Process Standard Deviation

The combined application of a Shewhart chart and cumulative sum (CUSUM) control chart is an effective tool for the detection of all sizes of process shifts as the scheme combines the advantages of a CUSUM at detecting small to moderate shifts and Shewhart for the quick detection of very large shifts. This article proposes new combined Shewhart–CUSUM S charts based on the extreme variations of ranked set sampling technique, for efficient monitoring of changes in the process dispersion. Using Monte Carlo simulations, the combined scheme is designed to minimize the average extra quadratic loss over the entire process shift domain. The results show that the combined Shewhart–CUSUM S charts uniformly outperform several other procedures for detecting increases and decreases in the process variability. Moreover, the proposed scheme can detect changes that are small enough to escape the Shewhart S chart or fairly large to escape detection by the CUSUM S chart. Numerical example is given to illustrate the practical application of the proposed scheme using real industrial data. Copyright © 2015 John Wiley & Sons, Ltd.     

Senti‐CS: Building a lexical resource for sentiment analysis using subjective feature selection and normalized Chi‐Square‐based feature weight generation

Sentiment analysis involves the detection of sentiment content of text using natural language processing. Natural language processing is a very challenging task due to syntactic ambiguities, named entity recognition, use of slangs, jargons, sarcasm, abbreviations and contextual sensitivity. Sentiment analysis can be performed using supervised as well as unsupervised approaches. As the amount of data grows, unsupervised approaches become vital as they cut down on the learning time and the requirements for availability of a labelled dataset. Sentiment lexicons provide an easy application of unsupervised algorithms for text classification. SentiWordNet is a lexical resource widely employed by many researchers for sentiment analysis and polarity classification. However, the reported performance levels need improvement. The proposed research is focused on raising the performance of SentiWordNet3.0 by using it as a labelled corpus to build another sentiment lexicon, named Senti‐CS. The part of speech information, usage based ranks and sentiment scores are used to calculate Chi‐Square‐based feature weight for each unique subjective term/part‐of‐speech pair extracted from SentiWordNet3.0. This weight is then normalized in a range of ?1 to +1 using min–max normalization. Senti‐CS based sentiment analysis framework is presented and applied on a large dataset of 50000 movie reviews. These results are then compared with baseline SentiWordNet, Mutual Information and Information Gain techniques. State of the art comparison is performed for the Cornell movie review dataset. The analyses of results indicate that the proposed approach outperforms state‐of‐the‐art classifiers.