Behavior of 316L stainless steel containing corrosion pits under cyclic loading

The environmental performance of 316L grade stainless steel, in the form of tensile specimens containing a single corrosion pit with various aspect ratios, under cyclic loading in aerated chloride solutions is investigated in this study. Results from environmental tests were compared and contrasted with those obtained using finite element analysis (FEA). Fractography of the failed specimens obtained from experiments revealed that fatigue crack initiation took place at the base of the shallow pit. The crack initiation shifted towards the shoulder and the mouth of the pit for pits of increasing depth. This process is well predicted by FEA, as the strain contour maps show that strain is the highest around the centric strip of the pit. However, for shallow pits, local strain is uniformly distributed around that strip but begins to concentrate more towards the shoulder and the mouth region for increasingly deep pits.     

Application of convolutional error correcting codes in ultrawideband M-ary PPM signaling

The interference issues related to ultrawideband (UWB) radio pose tight restrictions on the maximum data rate of UWB radio telecommunication systems. A possible solution is to reduce the required signal to interference ratio (SIR) that gives satisfactory performance to the UWB system. In this letter, we propose coded M-ary UWB radio communication systems. Two classes of convolutional codes, namely, low-rate superorthogonal codes and high-rate punctured codes are considered for this purpose. Simulation results on the bit error rate of the proposed system indicates that the system is capable to work in lower SIR's and therefore supports higher data transmission rates in a real interference environment compared to the previously proposed UWB communication systems.     

Recension des écrits sur l'impact des contacts sexuels précoces sur les hommes.

A review of the literature on the impact of sexual contacts between adults and boys reveals the existence of two principal outcomes: 1) some participants develop various disorders once in adulthood, such as behavioural problems, sexual disorders, or personality problems; 2) some participants do not present with any major disorders in the long run. These different outcomes may be associated with several moderating variables related to the sexual contacts, such as the level of coercion at the time of these contacts, the bond between the child and the adult, or the context of the sexual relation. However, the conclusions relating to the relations between early sexual contacts with adults and subsequent problems of adaptation in adulthood are difficult to determine. This is because of various methodological problems associated with relevant studies (i.e., definition of these contacts, nature of the sample, method evaluation, statistical analyses). In this article, we propose certain avenues of research that may help clarify this problem. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Amine-functionalized and non-functionalized mesoporous silica nanoparticles as the delivery system for tertiary butylhydroquinone (TBHQ)

Journal of Porous Materials - The aim of this study was to encapsulate 2-tert-butylhydroquinone (TBHQ), as a common synthetic antioxidant in food industries, by mesoporous silica nanoparticles...     

Frame time-hopping patterns in multirate optical CDMA networks using conventional and multicode schemes

A class of generalized optical orthogonal codes (OOCs), namely, frame time-hopping (FTH) patterns with an extremely large cardinality, are studied for implementing multirate and multiservice (MR/MS) optical CDMA (OCDMA) networks. Conventional MR/MS methods, namely variable spreading rate and parallel mapping, are considered. Using FTH patterns, the problem of low OOC code cardinality in conventional MR/MS schemes is removed. Moreover, several new multicode methods, using subcode concatenation scheme, are proposed for MR/MS OCDMA. The proposed multicode schemes present flexibility for supporting MR/MS applications such as lower implementation complexity and cost, less need for service synchronization, and finally lower link power budget. Multiple-access performances of the systems are evaluated using saddle-point approximation methods considering photodetector shot-noise, dark current, and circuit thermal noise. The results show that the conventional parallel mapping outperforms the other schemes in high received powers, and the proposed multicode method, using Walsh subcode along with difference modulation, presents the best performance in low received powers for the cases considered.     

The effect of cold rolling regime on microstructure and mechanical properties of AISI 304L stainless steel

In this paper, the effect of different thickness reductions by cold rolling on the microstructure and mechanical properties of AISI 304L austenitic stainless steel were investigated. The hot rolled steel strips were subjected to cold rolling at 0 °C from 10 to 90% thickness reduction. Microstructures, strain-induced martensitic transformation and mechanical properties of the cold-rolled specimens were characterized by X-ray diffraction, Feritscope measurements, optical metallography, hardness and tensile tests. The resulting transformation curve showed a sigmoidal shape with the saturation value of strain-induced martensite of approximately 100%. A good agreement was found between the experimental results and the Olsen–Cohen model. The results indicated that formation of strain-induced martensite clearly resulted in a significant strengthening of the steel.     

Voltammetric and Scanning Electrochemical Microscopic Studies of the Adsorption Kinetics and Self-Assembly of n-Alkanethiol Monolayers on Gold

The adsorption kinetics and self-assembly of hexadecyl mercaptan on gold have been investigated by scanning electrochemical microscopy (SECM), chronoamperometry, and cyclic voltammetry. The developed methodology allows one to evaluate the surface coverage and the average size of the defects in the monolayer film from the effective rate constant of electron transfer. Two kinetic regimes of self-assembly were identified: a rapid initial adsorption of hexadecyl mercaptan onto a clean gold surface from 5 mM solution (more than 90% coverage obtained in 1 to 5 min), and a slower subsequent annealing of a thiol monolayer resulting in a more compact film. Typically, a long-chain-length thiol-treated gold surface acts as an electronically insulating surface after about 1 h. The SECM images of partially covered gold surfaces were always featureless, suggesting that the defects in the film were smaller than 0.5 μm for any exposure time ≥ 1 min.     

Development and physico-mechanical characterization of carrageenan and poloxamer-based lyophilized matrix as a potential buccal drug delivery system

Context and objectives: The buccal mucosa presents a unique surface for non-invasive drug delivery and also avoids first-pass metabolism. The objective of this study was the formulation development of polymeric mucoadhesive lyophilized wafers as a matrix for potential buccal drug delivery.

Materials and methods: Differential scanning calorimetry (DSC) was used to develop an optimum freeze-cycle, incorporating an annealing step. The wafers were prepared by lyophilization of gels containing three polymers, κ-carrageenan (CAR 911), poloxamer (P407) and polyethylene glycol 600 (PEG 600). The formulations were characterized using texture analysis (for mechanical and mucoadhesion properties), hydration studies, thermogravimetric analysis (TGA), DSC, X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM).

Results and discussion: DSC showed the eutectic temperature (12.8?°C) of the system where the liquid solution and pure solids both existed at a fixed pressure which helped determine the freeze-annealing cycle at 55?°C for 7?h. Mechanical resistance to compression, hydration and mucoadhesion studies showed that optimized wafers were obtained from aqueous gels containing 2% w/w CAR 911, 4% w/w P407 and 4.4% w/w PEG 600. TGA showed residual water of approximately 1% and SEM showed a porous polymeric network that made ease of hydration possible.

Conclusions: Lyophilized wafers by freeze-drying gels containing 2% w/w CAR 911, 4% w/w P407 and 4.4% w/w PEG 600 with optimum physico-mechanical properties has been achieved.