Bioleaching of metal from waste stream using a native strain of Acidithiobacillus isolated from a coal mine drainage

In this study, the feasibility of using a biohydrometallurgical technique for selective metals recovery from electronic waste (e‐waste) by bacterial bioleaching was investigated. Acidithiobacillus was identified in coal mining acid mine drainage (AMD). The microorganism was studied using specific sequencing of a 16s rDNA fragment. The potential for the dissolution of copper from waste printed wire boards (PWBs) using the isolated Acidithiobacillus ferrooxidans (A. ferroxidans) was evaluated. The bioleaching experiments were performed in an orbital shaker at 30 °C and 170 rpm, with 10 % (v/v) inoculum and a pulp density of 30 g/L. The copper concentration was determined by energy dispersive x‐ray fluorescence (XRF). The result shows that copper recovery from PWBs using our A. ferrooxidans strain was 95 % after 8 days, which showed the feasibility of this process.     

Dissolution Rate Study of Fresh and Aging Triamterene-Urea Solid Dispersions

Triamterene-urea solid dispersions of varying weight fractions were elaborated by the melting carrier method and their dissolution profiles compared with the pure drug and physical mixtures. The dissolution rates of triamterene from solid dispersions were faster than the pure drug and physical mixtures.

Solubility studies revealed a linear increase in the solubility of the triamterene with the increase of urea concentration.

The intrinsic dissolution rates, determined by the rotating disc method, showed linear dissolution profiles in spite of that the scanning electron microscopy examination revealed that the surfaces do not maintain constant during the dissolution process.

Aging of the different preparations for one year at room temperature does not induced significant changes in their dissolution profiles.     

Tunable mechanical properties of core‐shell polymers of poly(hexyl methacrylate) and poly(methyl methacrylate) by semicontinuous heterophase polymerization

The synthesis of core/shell polymers with tunable mechanical properties made of poly(hexyl methacrylate) (PHeMA) and poly(methyl methacrylate) (PMMA) by a two‐stage semicontinuous heterophase polymerization, is presented here. This polymerization technique is characterized by employing low surfactant concentrations to produce large polymer‐to‐surfactant ratios. In this process, monomer is added in a continuous low rate to achieve monomer starved conditions, allowing to control particle size (usually smaller than 50 nm). To modulate the mechanical properties, the weight ratio of core/shell polymers are varied from 10/90 to 90/10 for direct and reverse compositions, respectively. Conversion was followed gravimetrically; nanoparticles were characterized with quasi‐elastic light scattering, IR spectroscopy, differential scanning calorimetry, transmission electron microscopy, and mechanical tests (tensile and hardness). Highly stable latex formed of nanoparticles, with high conversions are obtained. Tensile tests show that the mechanical properties can be tuned according to core/shell composition, mainly in the system formed by PMMA/PHeMA. These results are explained in terms of core‐and‐shell polymers location, composition and hardness. As expected, an increment in concentration of PMMA produces a more rigid material independently of its position. POLYM. ENG. SCI., 59:365–371, 2019. © 2018 Society of Plastics Engineers     

Long-chain lipids are required for the innate immune recognition of trehalose diesters by macrophages

Going to any length? Trehalose diesters of various chain lengths have been synthesised in order to determine the effect of lipid length on innate immune recognition, as determined by NO and cytokine production by macrophages. In this work, we show that longer lipids (C(20) -C(26)) are required for macrophage activation, with C(22) giving optimal activity.     

Characterization of rigid polyurethane foams containing microencapsulated Rubitherm<Superscript>®</Superscript> RT27: catalyst effect. Part II

Catalyst Tegoamin 33 has been used for the synthesis of rigid polyurethane (RPU) foams containing microencapsulated Rubitherm^® RT27 and having a high mechanical resistance. These materials could be employed in buildings for thermal insulation and thermal energy storage (TES). The fillers content influence on the foaming process and also the foam properties was evaluated. It was observed that a foam containing up to a 18 wt% of microcapsules can be manufactured, improving the TES capacity while maintaining the mechanical properties of the neat foam. Besides, it was observed that the mechanical resistance of foams synthesized using catalyst Tegoamin 33 are higher than those obtained when catalyst Tegoamin BDE was employed, with the mechanical resistance of the foam containing 21 wt% being higher than those of foams synthesized with catalyst BDE containing only 11 wt% of fillers while maintaining the advantages of an improvement in TES capacity. A general model of reaction curve of n tank-in-series of a same time constant was used to fit the rising curves. This model allowed to predict the final volume of the synthesized foam. Finally, TES capacities and mechanical properties of the synthesized foams were in the range of those reported in literature. Moreover, foam densities satisfied the restriction established by the Spanish regulation for building applications.     

Effect of lactation number, year, and season of initiation of lactation on milk yield of cows hormonally induced into lactation and treated with recombinant bovine somatotropin

Records representing data from 1,500 barren Holstein cows over an 8-yr period from a large commercial dairy farm in northern Mexico were analyzed to determine the effects of lactation number and season and year of initiation of lactation on milk production of cows induced hormonally into lactation and treated with recombinant bovine somatotropin (rbST) throughout lactation. Peak and 305-d milk yields were also assessed as predictors of total milk yield in cows induced into lactation. A significant quadratic relationship was found between 305-d milk yield and number of lactation [7,607 ± 145 and 9,548 ± 181 kg for first- and ≥6-lactation cows, respectively; mean ± standard error of the mean (SEM)] with the highest production occurring in the fifth lactation. Total milk yields of cows with ≤2 lactations were approximately 4,500 kg less than milk yields of adult cows (the overall average ± standard milk yield was 13,544 ± 5,491 kg per lactation and the average lactation length was 454 ± 154 d). Moreover, 305-d milk production was depressed in cows induced into lactation in spring (8,804 ± 153 kg; mean ± SEM) and summer (8,724 ± 163 kg) than in fall (9,079 ± 151 kg) and winter (9,085 ± 143 kg). Partial regression coefficients for 305-d milk yield and peak milk yield indicated an increment of 157 kg of milk per lactation per 1-kg increase in peak milk yield (r² = 0.69). Neither peak milk yield (r² = 0.18) nor 305-d milk yield (r² = 0.29) was accurate for predicting total milk yield per lactation. Year, parity, and season effects had significant influence on milk yield of cows induced into lactation and treated with rbST throughout lactation, and peak milk yield can assist in the prediction of 305-d milk yield but not total milk yield. This study also showed that hormonal induction of lactation in barren high-yielding cows is a reliable, practical, and affordable technique in countries where rbST treatment and prolonged steroid administration of dairy cows are legally permitted.     

Abscessed brucellar prostatitis. An infrequent location

Explanation of one case of abscessified brucellar prostatitis in a 44-year old patient. The emphasis is placed on the high incidence of brucellosis in the province of Soria and the rarity of the prostatic location of this condition. Also, a revision is made of the diagnostic methodology and current therapeutical approaches. The crucial role of the endocavitary ultrasound techniques both for diagnosis as well as treatment and case follow-up is highlighted.     

Rule‐based approach for topic maps learning from relational databases

Relational databases (RDBs) have been widely used as back end for information systems. Considering that RDBs have valuable knowledge interwoven in between stored data, how to access, represent and share this knowledge becomes an important challenge. Topic maps (TMs) emerge as a good solution for this problem. However, manual development of TMs is a difficult, time‐consuming and subjective task if there is no common guideline. The existing TMs building approaches mainly consider the meta‐information contained in a RDB, without considering the knowledge residing in the database content (its current state). Other approaches require a predefined configuration for applying a specific data transformation. This paper proposes an automatic method for TM construction based on learning rules. Our method considers the background knowledge of the RDBs during the building process and was implemented and applied on a representative set of 15 RDBs. The resulting TMs were validated syntactically using a standard tool and validated semantically through the inference of information using a formal query language. In addition, an analysis between the relational data (input) and its representation (output) was conducted. The results found in our experiments are encouraging and put in evidence the soundness of the proposed method.