数值模拟铸件充型过程中的液/固两相流动

铸造过程中熔融金属内的固体渣粒的运动轨迹是非常重要的。文中给出了粒子传输轨迹的数学模型,该数学模型采用显示法来确定粒子的位置。模拟研究结果与用其它数学模型的模拟结果比较,吻合良好。该模型可用于固体粒子位置的确定,并应用到SUTCAST软件中。     

Automated optimal design of double-layer latticed domes using particle swarm optimization

Most of the conventional design methods of large-scale domes need deep engineering insight; furthermore, they hardly give the most economical solutions. Therefore, in this paper, a new practical design algorithm is presented to automate optimal geometry and sizing design of the latticed space domes through the idea of using parametric mathematical functions. Moreover, a simple approach is developed for the optimal sizing design of trusses with outsized number of elements. The robust technique of particle swarm optimization is employed to find the solution of the propounded optimization problem. Some numerical examples on the minimum weight design of several famous domes are provided to demonstrate the efficiency of the proposed design algorithm.     

Magnetic and photocatalytic properties of CoFe2O4/Ni nanocomposites

Journal of Electroceramics - In this research, hard/soft CoFe2O4/Ni magnetic nanocomposite samples with different concentrations of Ni were successfully produced by a two-step mechanical alloying...     

Application of mesoporous magnetic carbon composite for reactive dyes removal: Process optimization using response surface methodology

Discharging the effluents of textile wastewaters into potable water resources can endanger the ecosystem, due to their reactivity, toxicity, and chemical stability. In this research, the application of powder activated carbon modified with magnetite nanoparticles (PAC-MNPs) as an adsorbent for removal of reactive dyes (Reactive black 5 (RB5) and reactive red 120 (RR120)) was studied in a batch system. The adsorption performance was evaluated as a function of temperature, contact time and different adsorbent and adsorbate concentrations. The levels of factors were statistically optimized using Box-Behnken Design (BBD) from the response surface methodology (RSM) to maximize the efficiency of the system. The adsorption process of both dyes was fit with the pseudo-second order kinetic and Langmuir isotherm models. The identified optimum conditions of adsorption were 38.7 °C, 46.3 min, 0.8 g/L and 102 mg/L for temperature, contact time, adsorbent dose, and initial dyes concentration, respectively. According to the Langmuir isotherm, the maximum sorption capacities of 175.4 and 172.4 mg/g were obtained for RB5 and RR120, respectively. Thermodynamics studies indicated that the adsorption process of the reactive dyes was spontaneous, feasible, and endothermic. After five cycles, the adsorption efficiency was around 84 and 83% for RB5 and RR120, respectively. A high value of desorption was achieved, suggesting that the PAC-MNPs have a good potential in regeneration and reusability, and also can be effectively utilized in industrial applications. PAC-MNPs also show a good anti-interference potential for removal of reactive dyes in dye-industry wastewaters.     

MnO2 Nanoparticles as Efficient Oxidant for Ultrasound-Assisted Synthesis of 2-substituted Benzimidazoles under Mild Conditions

In this article, a novel method for synthesis of 2-substituted benzimidazoles using MnO₂ nanoparticles as a convenient oxidant agent in ethanol-water (1:1) as solvent under ultrasound irradiation was demonstrated. In this protocol the desired products were purely obtained in high yields. The main advantages of this research are: mild procedure, simplicity of method, easily work-up, high yields, and short reaction times. The MnO₂ nanoparticles were synthesized through a solid-state reaction route using simple strarting materials. Furthermore, their structure was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FT-IR).     

Pure and mixed gas permeation study of silica incorporated polyurethane-urea membrane modified by MOCA chain extender

Polyurethane-urea (PUU) nanocomposite membranes have been prepared using various loadings of silica (SiO₂) nanoparticles. A Novel PU was fabricated by a two-step bulk polymerization technique based on polycaprolactone (PCL), hexamethylene diisocyanate (HDI), and diamine chain extender, 4,4-methylenebis(2-chloroaniline) (MOCA). The FTIR spectra indicated that the extent of phase separation reduces with increasing SiO₂ content. The presence of crystal regions in the soft and hard segments was confirmed by DSC and XRD analyses. The obtained results illustrated a decrement in the gases' permeation in the presence of SiO₂ particles. By increasing the filler content up to 15 wt% and pressure of 8 bar, the gas permeation value of the CO₂, O₂, and N₂ decreased 36%, 54%, and 59%, respectively. However, the permselectivity of the CO₂/N₂ and O₂/N₂ increased considerably, 55% and 13% respectively. On the contrary, by raising the temperature, a dramatic augmentation in the permeability of all gases with a simultaneous reduction in the selectivity values of both gas pairs was revealed. Increasing the pressure led to a decrease in the permeability values of all membranes for O₂ and N₂, whereas the permeability for CO₂ increased with the pressure. Nevertheless, the selectivity values for the pair of gases increased (at a pressure of 10 bar, 1.66 and 1.17 times the neat PU for CO₂/N₂ and O₂/N₂, respectively). Furthermore, the permeability of the CO₂, O₂, and N₂ for the mixed gases was smaller than for pure ones at the same gas upstream pressure. Nonetheless, like the pure gas, the selectivity of both pair gases increased.     

Nonlinear analysis of size-dependent frequencies in porous FG curved nanotubes based on nonlocal strain gradient theory

A nonlocal strain gradient model is developed in this research to analyse the nonlinear frequencies of functionally graded porous curved nanotubes. It is assumed that the curved nanotube is in contact with a two-parameter nonlinear elastic foundation and is also subjected to the uniform temperature rise. The non-classical theory presented for curved nanotubes contains a nonlocal parameter and a material length scale parameter which can capture the size effect. A power law distribution function is used to describe the graded properties through the thickness direction of curved nanotubes. The even dispersion pattern is used to model the porosities distribution. The high-order shear deformation theory and the von Kármán type of geometric non-linearity are utilized to obtain the nonlinear governing equations of the structure. The size-dependent equations of motion for the large amplitude vibrations of curved nanotubes are obtained by employing Hamilton’s principle. The analytical solutions are extracted for the curved nanotube with immovable hinged-hinged boundary conditions. Size-dependent frequencies of the curved nanotube exposed to thermal field are obtained using the two-step perturbation technique and Galerkin procedure. The effects of important parameters such as nonlocal and length scale parameters, temperature field, elastic foundation, porosity, power law index and geometrical parameters are studied in detail.

     

Phospholipids and oxophospholipids in atherosclerotic plaques at different stages of plaque development

We identified and quantified the hydroperoxides, hydroxides, epoxides, isoprostanes, and core aldehydes of the major phospholipids as the main components of the oxophospholipids (a total of 5–25 pmol/μmol phosphatidylcholine) in a comparative study of human atheroma from selected stages of lesion development. The developmental stages examined included fatty streak, fibrous plaque, necrotic core, and calcified tissue. The lipid analyses were performed by normal-phase HPLC with on-line electrospray MS using conventional total lipid extracts. There was great variability in the proportions of the various oxidation products and a lack of a general trend. Specifically, the early oxidation products (hydroperoxides and epoxides) of the glycerophosphocholines were found at the advanced stages of the plaques in nearly the same relative abundance as the more advanced oxidation products (core aldehydes and acids). The anticipated linear accumulation of the more stable oxidation products with progressive development of the atherosclerotic plaque was not apparent. It is therefore suggested that lipid infiltration and/or local peroxidation is a continuous process characterized by the formation and destruction of both early and advanced products of lipid oxidation at all times. The process of lipid deposition appears to have been subject to both enzymatic and chemical modification of the normal tissue lipids. Clearly, the appearance of new and disproportionate old lipid species excludes randomness in any accumulation of oxidized LDL lipids in atheroma.