Phase behavior,density, and crystallization of polyethylene in n‐pentane and in n‐pentane/CO2 at high pressures

The phase behavior and volumetric properties of polyethylene (PE) in solutions of n‐pentane and n‐pentane/CO₂ were studied in a temperature (T) range of 370–440 K at pressures up to 60 MPa. Measurements were conducted with a variable‐volume view‐cell system equipped with optical sensors to monitor the changes in the transmitted light intensity as the P or the T of the system was changed. Lower‐critical‐solution‐temperature‐type behavior was observed for all of the liquid–liquid (L–L) phase boundaries, which shifted to higher pressures in solutions containing CO₂. The solid–fluid (S–F) phase boundaries were investigated over a P range of 8–54 MPa and took place in a narrow T range, from 374 to 378 K in this P interval. The S–F phase boundary showed a unique feature in that the demixing temperatures showed both increasing and decreasing trends with P depending on the P range. This was observed in both the PE/n‐pentane and PE/n‐pentane/CO₂ mixtures. The density of these solutions were measured as a function of P at selected temperatures or as a function of T at selected pressures that corresponded to the paths followed in approaching the phase boundaries (S–F or L–L) starting from a homogeneous one‐phase condition. The data showed a smooth variation of the overall mixture density along these paths. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2201–2209, 2003     

Design and performance evaluation of a banyan network basedinterconnection structure for ATM switches

This paper presents a new self-routing packet network called the plane interconnected parallel network (PIPN). In the proposed design, the traffic arriving at the network is shaped and routed through two banyan network based interconnected planes. The interconnections between the planes distribute the incoming load more homogeneously over the network. The throughput of the network under uniform and heterogeneous traffic requirements is studied analytically and by simulation. The results are compared with the results of the baseline network and another banyan network based parallel interconnection network. It is shown that, for the proposed design, a higher degree of heterogeneity results in better performance     

Application of HUMF13A01 (AAAG)n STR polymorphism to the genetic diagnosis of coagulation factor XIII deficiency

Deficiency of the A subunit of coagulation factor XIII causes a severe bleeding disorder requiring life long replacement therapy. The mutations causing A subunit deficiency appear to be very heterogeneous, and it is impractical to identify each mutation before genetic counselling or prenatal diagnosis can be attempted. In this study we have shown that a highly polymorphic short tandem repeat element, HUMF13A01 (AAAG)n that occurs in the 5' flanking sequence of the factor XIII A subunit gene, can be used to follow the segregation of deficiency causing mutations. We studied 6 families with factor XIII A subunit deficiency from 5 different ethnic groups. All parents were heterozygous for the repetitive element and therefore all the families were informative. The linked polymorphism was used to carry out the first prenatal diagnosis of factor XIII A subunit deficiency. The analysis of this polymorphism by the polymerase chain reaction is rapid, reliable, requires little DNA and is ideal for the genetic analysis of factor XIII A subunit deficiency.     

Use of Warranties on Highway Projects: A Real Option Perspective

Since the introduction of warranty provisions in federal highway jobs, more and more state departments of transportation (DOTs) have considered the use of such provisions to protect their initial investment. This paper describes the pros and cons of warranty contracting in highway construction based on a survey of warranty practices in the United States. In particular, the need for state DOTs to buy a warranty for a well-built project is questioned. As an alternative, this paper introduces the warranty option, which gives the DOT the right to buy a warranty only if it becomes necessary at the end of construction. This option is exercised if the performance on site warrants it. This paper describes the mechanics of the warranty option and its advantages over the conventional warranty. A bid evaluation model is also developed for the warranty option approach.     

Generic visual analysis for multi- and hyperspectral image data

Multi- and hyperspectral imaging and data analysis has been investigated in the last decades in the context of various fields of application like remote sensing or microscopic spectroscopy. However, recent developments in sensor technology and a growing number of application areas require a more generic view on data analysis, that clearly expands the current, domain-specific approaches. In this context, we address the problem of interactive exploration of multi- and hyperspectral data, consisting of (semi-)automatic data analysis and scientific visualization in a comprehensive fashion. In this paper, we propose an approach that enables a generic interactive exploration and easy segmentation of multi- and hyperspectral data, based on characterizing spectra of an individual dataset, the so-called endmembers. Using the concepts of existing endmember extraction algorithms, we derive a visual analysis system, where the characteristic spectra initially identified serve as input to interactively tailor a problem-specific visual analysis by means of visual exploration. An optional outlier detection improves the robustness of the endmember detection and analysis. An adequate system feedback of the costly unmixing procedure for the spectral data with respect to the current set of endmembers is ensured by a novel technique for progressive unmixing and view update which is applied at user modification. The progressive unmixing is based on an efficient prediction scheme applied to previous unmixing results. We present a detailed evaluation of our system in terms of confocal Raman microscopy, common multispectral imaging and remote sensing.     

Deterministic Polymorphic Engineering of MoTe2 for Photonic and Optoelectronic Applications

Developing selective and coherent polymorphic crystals at the nanoscale offers a novel strategy for designing integrated architectures for photonic and optoelectronic applications such as metasurfaces, optical gratings, photodetectors, and image sensors. Here, a direct optical writing approach is demonstrated to deterministically create polymorphic 2D materials by locally inducing metallic 1T′-MoTe₂ on the semiconducting 2H-MoTe₂ host layer. In the polymorphic-engineered MoTe₂, 2H- and 1T′- crystalline phases exhibit strong optical contrast from near-infrared to telecom-band ranges (1–1.5 µm), due to the change in the band structure and increase in surface roughness. Sevenfold enhancement of third harmonic generation intensity is realized with conversion efficiency (susceptibility) of ≈1.7 × 10⁻⁷ (1.1 × 10⁻¹⁹ m² V⁻²) and ≈1.7 × 10⁻⁸ (0.3 × 10⁻¹⁹ m² V⁻²) for 1T′ and 2H-MoTe₂, respectively at telecom-band ultrafast pump laser. Lastly, based on polymorphic engineering on MoTe₂, a Schottky photodiode with a high photoresponsivity of 90 AW⁻¹ is demonstrated. This study proposes facile polymorphic engineered structures that will greatly benefit realizing integrated photonics and optoelectronic circuits.     

Classification rule discovery for the aviation incidents resulted in fatality

Data mining methods have been successfully applied to different fields. Aviation industry is one of them. There is a large amount of knowledge and data accumulation in aviation industry. These data could be stored in the form of pilot reports, maintenance reports, incident reports or delay reports. This paper explains the data mining application on the incident reports of the Federal Aviation Administration (FAA) Accident/Incident Data System database, contains incident data records for all categories of civil aviation between the years of 2000 and 2006. In this study, we applied data mining methods on the incident reports. Moreover rough sets concept is used to reduce the attributes of data set. The purpose of this application is to find out the effective attributes in order to reduce the number of the fatality in the incidents. The categorization tools and decision trees are used to find the relations and rules about the incidents resulted in fatality. For this purpose data-mining analysis is conducted. As a result some rules about the fatality are obtained and also the parameters that affect the fatality in the incident have determined. The rules found are tested in terms of their accuracy and reliability, and these results are seen to be meaningful.     

Particle-based simulation of the interaction between fluid and knitwear

We present a particle-based method to simulate and visualize the interaction of knitwear with fluids. The knitwear is modeled using spring-mass systems and the fluid is modeled using the smoothed particle hydrodynamics method. Two-way coupling is achieved by considering surface tension, capillary, and interparticle forces between the fluid and knitwear. The simulation of fluid and knitwear particles is performed on the graphics processing unit. Photorealistic rendering of knitwear and fluid is achieved by using a hardware-accelerated rasterization-based rendering technique. Our method is able to simulate and visualize the macro- and microstructure of free-form knitwear and reflective and refractive characteristics of the fluid surface.     

Arduino-based slider setup for gas–liquid mass transfer investigations: Experiments and CFD simulations

The implementation of traditional sensors is a drawback when investigating mass transfer phenomena within microstructured devices, since they disturb the flow and reactor characteristics. An Arduino based slider setup is developed, which is equipped with a computer-vision system to track gas–liquid slug flow. This setup is combined with an optical analytical method allowing to compare experimental results against CFD simulations and investigate the entire lifetime of a single liquid slug with high spatial and temporal resolution. Volumetric mass transfer coefficients are measured and compared with data from literature and the mass transfer contribution of the liquid film is discussed.