On regular drawn symbolic picture languages

Drawn symbolic pictures are an extension of drawn pictures obtained by associating a symbol from an alphabet to each point of the picture. In the paper we will address some new interesting issues derived from the introduction of the symbols and we will identify the conditions, which ensure the preservation of properties holding for drawn pictures in the setting of the proposed extension.     

Efficient Simulation of hybrid stripmap/spotlight SAR raw signals from extended scenes

The hybrid stripmap/spotlight mode for a synthetic aperture radar (SAR) system is able to generate microwave images with an azimuth resolution better than the one achieved in the stripmap mode and a ground coverage better than the one of the spotlight mode. In this paper, time- and frequency-domain-based procedures to simulate the raw signal in the hybrid stripmap/spotlight mode are presented and compared. We show that a two-dimensional Fourier domain approach, although highly desirable for its efficiency, is not viable. Accordingly, we propose a one-dimensional (1-D) range Fourier domain approach, followed by 1-D azimuth time-domain integration. This method is much more efficient than the time-domain one, so that extended scenes can be considered. In addition, it involves approximations usually acceptable in actual cases. Effectiveness of the simulation scheme is assessed by using numerical examples.     

Synthesis and Evaluation of Voltage-Gated Sodium Channel Blocking Pyrroline Derivatives Endowed with Both Antiarrhythmic and Antioxidant Activities

Under the hypothesis that cardioprotective agents might benefit from synergism between antiarrhythmic activity and antioxidant properties, a small series of mexiletine analogues were coupled with the 2,2,5,5-tetramethylpyrroline moiety, known for its antioxidant effect, in order to obtain dual-acting drugs potentially useful in the protection of the heart against post-ischemic reperfusion injury. The pyrroline derivatives reported herein were found to be more potent as antiarrhythmic agents than mexiletine and displayed antioxidant activity. The most interesting tetramethylpyrroline congener, a tert-butyl-substituted analogue, was at least 100 times more active as an antiarrhythmic than mexiletine.     

Effect of catalysts in the quality of syngas and by-products obtained by co-gasification of coal and wastes. 1. Tars and nitrogen compounds abatement

The aim of this work is to analyse the possibility of using co-gasification technology to process coal mixed with wastes to take profit of its energy content and at the same time to minimize the environmental impact associated with the use of wastes and to diminish the costs of flue gas treatment. The addition to coal of different types of materials, like: pine based waste, petcoke and polyethylene (PE), was not found to give rise to any operational problems, regarding both the feeding system and gasification process and led to higher energy conversions, however, the gas presented higher tars and hydrocarbons content. Several catalysts were tested, such as, dolomite, olivine, nickel and magnesium oxides, zinc oxides and cobalt and molybdenum oxides. Catalyst action was analysed in tars release and also in ammonia compounds reduction. The presence of catalysts allowed increasing hydrogen release, whilst there was a decrease in hydrocarbons and tars contents. A nickel-magnesium oxide was the catalyst that led to the highest reduction in hydrocarbons and tars. This catalyst also led to the lowest NH₃ content in the fuel gas produced, due to the catalyst efficiency in NH₃ destruction.     

A comparison between wet and cryogenic drilling of CFRP/Ti stacks

This paper compares conventional and cryogenic cooling in the deep hole drilling of carbon fiber reinforced polymer (CFRP)/Ti stacks. Various parameters are taken into account to find if the use of cryogenic coolant is justified by the improvement of the final results. Both the thrust and the torque were acquired continuously during the machining operations and compared both in average and distribution. The use of a cryogenic coolant brings a reduction in thrust force and torque without any sensible drawback. Overall the results prove that cryogenic drilling is a suitable technology for CFRP/Ti stack drill.     

Organizational Learning Mechanisms and Creative Climate: Insights from an Italian Fashion Design Company

This paper investigates the relationship between different types of organizational learning mechanisms and creative climate. In the context of an action research study, this paper focuses on insights from a survey that was administered to all the employees of the Product Design and Development unit of the company. The results demonstrate that the three different types of organizational learning mechanisms considered in the study (cognitive, structural and procedural mechanisms) are associated with creative climate. The study generates new scientific knowledge about the role of organizational learning mechanisms and provides specific recommendations for organizations that aim to enhance creative climate.     

Crossing safety barriers: influence of children's morphological and functional variables

Thirty-three children between 3 and 6 years of age were asked to climb four different types of safety barriers. Morphological and functional variables of the children, which were expected to influence climbing or passing through skills, were collected. The influence of those variables on children’s success rate and time to cross was tested. No barrier offered a total restraining efficacy. The horizontal bars barrier was crossed by 97% of the children. In the group of children that succeeded in crossing the four barriers, mean time to cross the most difficult barrier was 15 s. Age was the best predictor for success in crossing most barriers but morphology and strength were important predictors of time to cross. The influence of anthropometric variables in time to cross was dependent upon the characteristics of the barrier. A good design of safety barriers should consider children’s age, morphology and strength.     

Bayesian analysis of repairable systems showing a bounded failure intensity

The failure pattern of repairable mechanical equipment subject to deterioration phenomena sometimes shows a finite bound for the increasing failure intensity. A non-homogeneous Poisson process with bounded increasing failure intensity is then illustrated and its characteristics are discussed. A Bayesian procedure, based on prior information on model-free quantities, is developed in order to allow technical information on the failure process to be incorporated into the inferential procedure and to improve the inference accuracy. Posterior estimation of the model-free quantities and of other quantities of interest (such as the optimal replacement interval) is provided, as well as prediction on the waiting time to the next failure and on the number of failures in a future time interval is given. Finally, numerical examples are given to illustrate the proposed inferential procedure.     

负载贵金属的层柱分子筛比表面积研究

采用两种矿产钙质蒙脱土为原料制备了两种层柱分子筛（Ａｌ－ＣＬＭ和Ａｌ－ＣＬＢ）。首先考察了焙烧温度对其比表面积的影响，结果发现在３００～５００℃范围内，随着焙烧温度的提高，层柱分子筛的比表面积逐渐增大，６００℃以后比表面积迅速下降；对负载贵金属Ｐｔ或Ｐｄ后其比表面积变化情况的研究表明，不论是Ａｌ－ＣＬＭ还是Ａｌ－ＣＬＢ，负载金属后比表面积均下降，且负载Ｐｔ后比表面积下降均比负载Ｐｄ后比表面积下降得多；在Ｐｔ／Ａｌ－ＣＬＭ比表面积因浸渍液的不同而引起的比表面积变化的研究中，发现用酸性较强的浸渍液（Ｈ２ＰｔＣｌ６·６Ｈ２Ｏ）比用酸性较弱的浸渍液（Ｐｔ（ＮＨ３）４Ｃｌ２）所引起的比表面积下降得多，最后在Ｐｔ（Ｐｄ）／Ａｌ－ＣＬＭ和Ｐｔ（Ｐｄ）／Ａｌ－ＣＬＢ的苯加氢反应中发现苯转化率随着比表面积的增大而上升。