Three ways to implement interfacial techniques: application tomeasurements of chromatic dispersion, birefringence, and nonlinearsusceptibilities

Depending on the spectal width of the source illuminating an interferometer, measurement procedures can utilize either the whole interferogram, or only the fringe envelope, or only the fringe quick oscillations. With an ultraband spectrum source, a simplified adaptation of the methods of Fourier transform spectroscopy yields the variations of the test-fiber propagation constant over the whole wavelength-interval of the source. Chromatic dispersion can then be computed from a single interferogram. With narrower spectrum sources, only the fringe envelopes are utilized and yield measurements of mode delay, with application to chromatic and polarization mode dispersion. In this case, however, interferograms at several wavelengths are necessary. With even narrower spectrum sources, the fringe quick oscillations provide measurements of phase shifts, related to changes in the mode propagation constant, when outside perturbations are applied to the test fiber. A direct method for measuring the third-order nonlinear susceptibilities is discussed. In this case the outside perturbation is an intense pump laser field     

Polymer aqueous solutions as quenching media. II. Ethylene oxide–propylene oxide copolymers

The cooling power of aqueous solutions of ethylene oxide-propylene oxide copolymers are studied with a silver standard sample by using two apparatuses quench with injection and quench with agitation. For temperature T>400°C, the viscosity plays the predominant role; for T<400°C, the cooling is controlled by the polymer precipitation and the cooling rate decreases by lowering the cloud point of the polymer solution. This work demonstrates the possibility of adjusting the cooling curves by taking into account the thermodynamical properties of the polymer.     

The correlation between the thermoelectric properties and stoichiometry in the boron carbide phase B4C-B10.5C

Electrical conductivity, thermoelectrical power and thermal conductivity measurements on boron carbide samples show that the electrical conductivity follows the small polaron hopping theory and that thermal conductivity occurs by phonon diffusion. The evolution of these properties with carbon content illustrates the particular role played by the 13.3 at% C compound in the phase homogeneity range B_10.5C to B₄C. The value of the figure of merit (0.85×10^–3 K at 1250 K) proves that this particular boron carbide compound could be a very interesting candidate material for high-temperature thermoelectrical conversion.     

A single phase model of mechanisms effecting miscible surfactant oil recovery

The concept of volume averaging is used to theoretically study the mechanisms of mass dispersion, adsorption, and dead-space volume. These mechanisms are important to the understanding of miscible surfactant flooding. After simpiffication based on order-of-magnitude scaling, a linear core model is solved using state variable finite-difference techniques. Mass dispersion and adsorption are shown to be important model parameters while dead-space volume is a rather insensitive model parameter.     

冠带层新平台技术

子午线轮胎出现不久，就采用钢丝带束层代替了纤维带束层，这对于实现子午线轮胎提高使用寿命和改善操纵性能的潜能是必要的。     

Visiting pebbles on rectangular grids: coordinating multiple robots in mobile fulfilment systems

Intelligent Service Robotics - Multi-robot path finding and coordination is one of the key performance-affecting subsystems of the overall robotic order fulfilment process for use in warehouse...     

Isothermal section at 1673 K of the Mo–Ru–Si diagram and crystallographic structures of ternary phases

Efforts to improve the high temperature behavior of MoSi₂ in oxidizing environments led to the investigation of the Mo–Ru–Si phase diagram. The isothermal section at 1673 K was determined by X-ray diffraction, optical and scanning electron microscopies and EPMA. Five new silicides were identified and their crystallographic structure was characterized using conventional and synchrotron X-ray as well as neutron powder diffraction. Mo₁₅Ru₃₅Si₅₀, denoted α-phase, is of FeSi-type structure, space group P2₁3, a=4.7535 (5) Å, D_x=7.90 g. cm⁻³, Bragg R=7.13. Mo₆₀Ru₃₀Si₁₀ is the ordered extension of the Mo₇₀Ru₃₀ σ-phase with space group P4₂/mnm, a=9.45940(8) Å, c=4.94273(5) Å, D_x=6.14 g. cm⁻³, Bragg R=5.75.     

High Figure of Merit (FOM) of Bragg Modes in Au‐Coated Nanodisk Arrays for Plasmonic Sensing

Gold‐coated nanodisk arrays of nearly micron periodicity are reported that have high figure of merit (FOM) and sensitivity necessary for plasmonic refractometric sensing, with the added benefit of suitability for surface‐enhanced Raman scattering (SERS), large‐scale microfabrication using standard photolithographic techniques and a simple instrumental setup. Gold nanodisk arrays are covered with a gold layer to excite the Bragg modes (BM), which are the propagative surface plasmons localized by the diffraction from the disk array. This generates surface‐guided modes, localized as standing waves, leading to highly confined fields confirmed by a mapping of the SERS intensity and numerical simulations with 3D finite element method. The optimal gold‐coated nanodisk arrays are applied for refractometric sensing in transmission spectroscopy with better performance than nanohole arrays and they are integrated to a 96‐well plate reader for detection of IgY proteins in the nanometer range in PBS. The potential for sensing in biofluids is assessed with IgG detection in 1:1 diluted urine. The structure exhibits a high FOM of up to 46, exceeding the FOM of structures supporting surface plasmon polaritons and comparable to more complex nanostructures, demonstrating that subwavelength features are not necessary for high‐performance plasmonic sensing.     

Thin and thick YBCO films grown by MOCVD processes. Study of the angular magnetic field dependence of current transport properties

Thin and thick YBCO Films have been grown by Aerosol Assisted as well as by thermal MOCVD. The Aerosol Assisted MOCVD technique allows the growth of YBCO films from a single liquid source at deposition rates of up to 10m/h.Transport measurements (I-V) on etched microbridges using a single pulse technique have been performed. The angular magnetic field dependence J_c() of the critical current density from T_c down to 50 K has been measured. Transport properties are reported and discussed with respect to the microstructural features as determined by X-ray diffraction and electron microscopy.