Sinterability and properties of Ti(N1−x,O x ) y -(V,Ta)C-Ni sintered alloys having a golden colour

The effect of oxygen and carbide addition on the sinterability of TiN _y (0.42<y<1)-Ni alloys, in which part of the nitrogen is replaced by oxygen was investigated. It was found that sinterability increased as the oxygen and carbide content increased, but the strength of the resultant sintered alloys was significantly reduced due to the presence of Ni₃Ti and Ti₂O₃ phases when the oxygen content exceeded 50 mol %. The sintered alloy with the highest hardness was found whenx=0.7,y=0.78 and the (V,Ta)C content was 18% by weight and this alloy was characterized by having a low density, good corrosion resistance and the colour of gold.     

Distributed architecture for energy management D-structure

Electric power systems are expanding in size and complexity, and the requirement for the energy management system (EMS) is becoming more important. In this computer control system, a single control computer is used mainly as the primary computer and its software is very complicated because of its hugh number of small, quick tasks to obtain high response speed. Therefore, much effort is needed to develop and modify the programs, and the responsiveness of this centralized architecture varies greatly when many faults occur in the power system. This paper describes a new distributed architecture for the EMS. Distributed processors execute the functions cooperatively with periodic access to the common bulletin board database in which information about the power system exist. This architecture facilitates the software development and maintenance, and it also enhances the performance by the parallel processing of the distributed functions.     

Molecular characterization of a single mitochondria-associated double-stranded RNA in the green alga Bryopsis

OBJECTIVE: To evaluate the effect of a moderate dose of fish oil on glycemic control and in vivo insulin action in type 2 diabetic men with elevated plasma triacylglycerols and to determine the effect of the same treatment on gene expression of GLUT4, lipoprotein lipase (LPL), and hormone-sensitive lipase (HSL) in the abdominal adipose tissue. RESEARCH DESIGN AND METHODS: A total of 12 type 2 diabetic men were randomly allocated to 2 months of 6 g daily of either fish oil or sunflower oil, separated by a 2-month washout interval, in a double-blind crossover design. RESULTS: For glucose metabolism, 2 months of fish oil supplementation compared with sunflower oil led to similar fasting plasma insulin, glucose, and HbA1c. Basal hepatic glucose production did not increase after fish oil. There was no difference in insulin suppression of hepatic glucose production nor in insulin stimulation of whole-body glucose disposal measured by the euglycemic-hyperinsulinemic clamp. Fish oil did not ameliorate the low mRNA level of GLUT4 in adipose tissue of these patients. For lipid profile, fish oil lowered plasma triacylglycerol more than sunflower oil (P < 0.05) and tended to increase the amount of mRNA of both LPL and HSL in adipose tissue. CONCLUSIONS: A moderate dose of fish oil did not lead to deleterious effects on glycemic control or whole-body insulin sensitivity in type 2 diabetic men, with preserved triacylglycerol-lowering capacities.     

Synthesis of thermosetting poly(phenylene ether) containing allyl groups

New thermosetting poly(2-allyl-6-methylphenol-co-2,6-dimethylphenol)s (3) have been developed by oxidative coupling copolymerization of 2-allyl-6-methylphenol (1) with 2,6-dimethylphenol (2), followed by thermal curing. Copolymerization was conducted in nitrobenzene in the presence of copper(I) chloride and pyridine as the catalyst under a stream of oxygen, producing high molecular weight copolymers (M_n∼50,000) with broad molecular weight distributions (M_w/M_n∼35). The structure of resulting copolymers 3 was characterized by IR, ¹H, and ¹³C NMR spectroscopy. Cross-linking reactions of copolymers were carried out by thermal treatment in the absence or presence of a peroxide (3 wt%, 2,5-dimethyl-2,5-di(tert-butylperoxy)-3-butane). The 10% weight loss and glass transition temperatures of the cured copolymers were 436 °C in nitrogen and 235 °C, respectively after curing at 70 °C for 1 h and 300 °C for 1 h. The average refractive index of the cured copolymer (3b) film was 1.5407, from which the dielectric constant (ε) at 1 MHz was estimated as 2.6. The ε and dissipation factor of copolymer-films at 1 MHz were directly measured from their capacitances as 2.5-2.6 and 0.0015-0.0019, respectively.     

Translation, adaptation, and validation of the SF-36 Health Survey for use in Japan

Development of the Japanese SF-36 was completed in two phases: Phase 1: Japanese version 1.1 was produced according to International Quality of Life Assessment (IQOLA) project guidelines, but some results of psychometric tests were unexpected. First, scores varied little across physical-functioning items. Second, using factor analysis, we could not clearly distinguish the scales designed to measure the "physical" component of quality of life from those designed to measure the "mental" component. Phase 2: Focus-group discussions revealed that limited had often been interpreted as limited by a doctor. Therefore, is difficult to do was used instead (version 1.2). Results of two surveys indicated that version 1.2 yields scores that are reliable by internal consistency and test-retest standards and yields two principal components. In Japan, however, the pattern of correlations between some scales and the principal components differs from that in the United States. Iterative use of qualitative and quantitative methods was very important in developing the Japanese SF-36.     

Size effect in the low-field Hall coefficient of single-crystal copper films

Measurements of the low-field Hall coefficientR _H of single-crystal copper films were made at 4.2 K by the use of a SQUID. The surface normaln of the samples was directed in the [100], [110], and [111] directions and the ratio of the thickness to the mean free path ranged from 0.1 to 0.7. It is found that the effect of surface scattering causesR _H to decrease whenn [100], whereas it causesR _H to increase whenn [110] and [111]. This behavior is interpreted in terms of the geometrical characteristics of the Fermi surface.     

Degradation behavior of moduli in extruded pure magnesium during low- to giga-scale cyclic tension fatigue

The mechanical properties of extruded pure magnesium during cyclic tension fatigue in the low- to giga-scale regime at room temperature have been investigated using ultrasonic reflection methods with longitudinal and shear waves. The acoustic velocities and calculated Young’s and shear moduli decreased by a large percentage with an increase in the number of cycles in all cycle modes due to growth of grain boundary voids. The eventual degradation of the properties was largest during giga-cycle fatigue, in which the moduli decreased by ～9%. The elastic behavior depended on the drive stress and the number of cycles rather than on fatigue time. Longitudinal and shear wave propagation characteristics and investigations of a grain boundary before and after fatigue using electron backscatter diffraction based on field-emission scanning electron microscopy and focused ion beam transmission electron microscopy revealed that the largest boundary void gap width was less than several nanometers (almost closed). The Poisson’s ratio and bulk modulus were affected notably by the void gap, in which the threshold corresponds to the longitudinal wave amplitude. Other damage phase data were determined using scanning electron microscopy, Vickers hardness, and surface roughness tests under progressive fatigue; these results also indicated slight grain boundary degradation.     

The ubiquitin-encoding genes of Kluyveromyces lactis

The ubiquitin encoding genes of Kluyveromyces lactis were cloned. Three genes, KlUBI1, KlUBI3 and KlUBI4, were found in this yeast, while in Saccharomyces cerevisiae there are four genes, UBI1, -2, -3 and -4. The UBI1/UBI2 duplication is thus absent from the K. lactis genome. General structural features of ubiquitin genes were very similar in these two species (presence of an intron in KlUBI1, fusion to ribosomal protein genes in KlUBI1 and KlUBI3, spacer-less polyubiquitin repeats in KlUBI4). Disruption or deletion of K. lactis ubiquitin genes showed that: (a) disruption of KlUBI1 was lethal (in S. cerevisiae, ubi1/ubi2 double deletion is lethal); (b) KlUBI3 is also an essential gene for cell growth; (c) deletion of KlUBI4 led to an increased sensitivity to high temperature, similar to the ubi4 mutation in S. cerevisiae, but, in contrast to the latter, the klubi4 mutant was not sensitive to carbon or nitrogen source starvation. The syntenic relationship of ubiquitin loci between K. lactis and S. cerevisiae genomes is also described.