Microwave hybrid fast sintering of red clay ceramics

This work aimed to examine the performance of the hybrid sintering of clay ceramic in a microwave furnace, compared to the sintering process in a conventional furnace. The raw materials were subjected to X-ray fluorescence, loss on ignition (LOI), X-ray diffraction, particle size distribution, real specific mass, and thermogravimetric analyses. The red clay ceramic mass was prepared, extruded, pre-sintered in a conventional furnace at 600°C/60 min, and sintered at temperatures between 700 °C and 1100 °C. The sintering conventional (resistive oven) was carried out for 60 min with a heating rate of 10°C/min. In the microwave furnace, the sintering times were 5, 10, and 15 min, with a heating rate of 50°C/min, with a sintering chamber coated with silicon carbide (susceptor). The sintered specimens were characterized according to linear shrinkage, water absorption, apparent porosity, apparent specific mass, X-ray diffraction, Raman spectroscopy analysis, spectroscopy analysis in the ultraviolet and visible regions, microhardness, and scanning electron microscopy. The results showed that microwave sintering promoted an increase in the microhardness and apparent specific mass, and reduction in water absorption and apparent porosity values, due to greater densification in the microstructure. The best results occurred for specimens sintered at 1100°C.     

Theory of an anisotropic thermoelectric refrigerator in a magnetic field

It is shown that the difference between the specific thermal conductivity coefficients in the absence of an electric current and field has a substantial effect on the maximum temperature drop.Chernovitsy State University, Ukraine. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 66, No. 6, pp. 729–732, June, 1994.     

Transmission Electron Microscopy and Electron Energy-Loss Spectroscopy Characterization of Glass Phase in Sol-Gel-Derived Mullite

Sol-gel-derived mullite ceramics were processed by pressureless sintering at 1600°, 1650°, and 1700°C for 4 h. Microstructural and microchemical characterization of the mullite materials was performed using transmission electron microscopy, in conjunction with energy-dispersive X-ray spectroscopy and electron energy-loss spectroscopy (EELS). Apart from mullite grain diameter and triplepocket size, no major microstructural changes were observed with increasing sintering temperature. Residual glass was present at triple pockets and along two-grain junctions. Not all grain boundaries revealed the presence of a continuous amorphous intergranular film. Clean interfaces were observed only at boundaries with one grain parallel to the [001] orientation (low-energy configuration). Quantitative EELS analysis of mullite grains and glass pockets revealed only small changes in composition with increasing sintering temperature; i.e., the alumina:silica ratio slightly increased for mullite and glass. The analysis implied that mullite with this relatively high aluminum content would not be stable adjacent to residual glass. However, a stable glass-mullite system has been proposed, because impurity cations were detected within glass pockets, which suggested a slight shift of the subsolidus line (glass-mullite/ mullite) to a higher amount of alumina. Energy-loss nearedge structure studies of the Si- L _2,3 edge revealed a similar near-edge structure for the mullite, residual glass, and quartz. Thus, SiO₄ tetrahedra were thought to be the main building units of the glass contained in sintered mullite.     

Hyperoxia increases paradoxical sleep rhythm in the pontine cat

Pontine cat is an ectothermic preparation, whose central temperature can artificially be lowered from 36 degrees C to 26 degrees C; this gradual hypothermia is accompanied by a dramatic increase in paradoxical sleep (PS). Two main hypotheses might explain this result: executive systems of PS might be switched on gradually by cold-sensitive thermodetectors, whereas inhibitory monoaminergic mechanisms appear to be warm-sensitive. On the other hand, energy saving mechanisms peculiar to hypothermia might promote PS appearance. Indeed, in normal animals, PS is selectively suppressed both by hyperthermia and hypoxia. The inhibitory effect of hypoxia might explain why hypothermia, which protects the brain against hypoxic alterations, might facilitate PS. If this last hypothesis is correct, the putative increase in cerebral oxygen supply might increase PS. For this reason, we submitted eight pontine carotid-deafferented cats, kept at the same central temperature (34 +/- 0.5 degrees C: temperature clamp) to periodic hyperoxia (PaO2 = 58 +/- 7 kPa) or room air (PaO2 = 17 +/- 2 kPa) alternatively during 4- or 12-h periods. Hyperoxia induced an 85% increase in PS, mainly due to an increase in PS rhythm (PS cycle duration was 65 +/- 4 min in normoxia and 45 +/- 4 min in hyperoxia, p<0.0001). In five animals, after hyperoxia, PS cycle returned gradually back to control values in 4 to 12 h. These findings show that PS is exquisitely sensitive to conditions that impair oxidative metabolism. The role of cholinergic executive PS systems as putative metabolic-sensitive neurons remains to be established.     

Compatibility of polysaccharide/maleic copolymer blends. IV. Thermal behavior of hydroxypropyl cellulose‐containing blends

The compatibility of the hydroxypropyl cellulose (HPC) with maleic acid–vinyl acetate copolymer in the solid state was studied by thermogravimetry, thermo‐optical analysis, differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and optical microscopy. It was established that physical interactions are prevalent in blends with a high content of HPC, whereas chemical interactions predominate in blends with a medium and low content of HPC. By increasing the temperature, the thermochemical reactions are favored. Thermal properties are dependent on the mixing ratio of the components. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2585–2597, 2003