A place for Bobo in play therapy.

Some therapists hold that the Bobo and other aggressive toys should be excluded from the playroom as they elicit acting-out behavior that is transferred to the world outside the playroom. However, many therapists view the inclusion of these items as imperative elements that facilitate positive growth and maturation in the child. Interviews with authorities in the field of play therapy support the position that the inclusion of the Bobo is not only useful, but a therapeutic necessity. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Intensive filial therapy with child witnesses of domestic violence: A comparison with individual and sibling group play therapy.

The rationale for utilizing filial therapy as a treatment intervention with child witnesses of domestic violence while residing with their mothers in a shelter facility is explored and the effectiveness of an intensive 12-session filial therapy parent training group, conducted within 2-3 weeks, is described (n=11; aged 4-10 yrs). Results of analysis of covariance revealed that child witnesses in the experimental group significantly reduced behavior problems prevalent in child witnesses and significantly increased their self-concept as compared to child witnesses in the non-treatment comparison group. In addition, t-test results showed that mothers who facilitated treatment of the experimental group scored significantly higher after training on both their attitudes of acceptance and their empathic behavior. Comparative analysis revealed that intensive filial therapy as facilitated by the children's mothers was as effective in reducing behavior problems as was intensive individual play therapy and intensive sibling group play therapy as facilitated by professionally trained therapists. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Gel formation in diimide‐hydrogenated polymers

The hydrogenation of diene‐based polymers via diimide is a very attractive alternative to the conventional catalytic hydrogenation route based on gaseous molecular hydrogen. However, serious crosslinking always accompanies it and limits the end‐use properties of the polymers. Gel formation in polymers that are hydrogenated via diimide has been investigated in detail through an inspection of all the chemical reactions involved in the process. The results indicate that hydrogen peroxide decomposition, some reactions related to oxygen, and the redox reaction between hydrogen peroxide and hydrazine are capable of generating radicals. However, radicals generated in the aqueous phase do not appear to initiate the crosslinking of diene‐based polymers in the latex form. It is proposed that the primary radicals giving rise to crosslinking are generated in the polymer phase in situ, and the step responsible for generating these organic radicals is possibly the diimide disproportionation reaction. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1122–1125, 2005     

Effects of cashew nut shell liquid as a plasticizer on cure characteristics,processability, and mechanical properties of 50 : 50 NR/EPDM blends: A comparison with paraffin oil

50 : 50 natural rubber (NR) and ethylene–propylene–diene monomer rubber (EPDM) blends were prepared with different contents of cashew nut shell liquid (CNSL), a natural product obtained from the shells of the cashew nut, as a plasticizer. For comparison, a commercial paraffin oil plasticizer was also used. The effect of plasticizer content on the cure characteristics, processability, and mechanical properties such as tensile strength, elongation at break, and Young's modulus before and after ageing was investigated. Scanning electron microscopy (SEM) was used to observe the blend morphology. The results indicated that the CNSL plasticizer resulted in lower Mooney viscosity and lower cure time of the 50 : 50 NR/EPDM blends. The incorporation of CNSL into 50 : 50 NR/EPDM blends improved tensile strength and elongation at break but decreased Young's modulus. On addition of CNSL the resistance of the blends to heat and weathering ageing improved. Scanning electron micrographs revealed that the morphology of the blend plasticized with CNSL is finer and more homogeneous compared with the blend plasticized with paraffin oil. Overall results indicate that CNSL can be used as a cheaper plasticizer to replace paraffin oil in NR/EPDM blends with improved processability and mechanical properties. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Human, rhesus macaque, and feline sequences highly similar to mouse mammary tumor virus sequences

Sequences highly similar (>95%) to the mouse mammary tumor virus (MMTV) env gene have been amplified from human DNA samples, including DNA samples from patients with breast cancer (BC) and persons who did not have BC. The sequences from human DNA were distinct from the MMTV sequences used as controls in these PCR reactions, indicating that these results are not simply due to contamination. In addition to both, mouse and human-related sequences were also amplified from some monkey and cat genomic DNA samples. These products were shown to be distinct from, but highly related to, the MMTV env gene, whereas, testing of other sources (lambda phage, snake, cockroach, sea urchin, chicken, or dog) demonstrated no specific amplification. A sequence 90% similar to the MMTV group antigen gene (gag) was amplified from cat DNA. These results indicate that DNA from vertebrate species other than rodents, including some but not all humans, monkeys, and cats, can contain sequences closely related to MMTV.     

The influence of Ni/Nd‐based Ziegler–Natta catalyst on microstructure configurations and properties of butadiene rubber

Neodymium (Nd)‐based Ziegler–Natta catalyst has been well known for preparing polybutadiene rubber (BR) containing high, about 98%, cis−1,4 configuration with extremely low gel content providing superior resistance to low‐temperature fatigue and abrasion. However, its cost is more expensive than a conventional nickel (Ni)‐based catalyst. The Nd‐BR has poor processability with high cold flow due to its high linearity and molecular weight. To compare with a traditional process, the BR produced by Ni‐based catalyst has higher level of branching resulting in the better processability, but it contains medium amount of gel. To balance the catalyst cost and the BR properties, this article reported the influence of a solution containing Ni‐ and Nd‐based Ziegler–Natta catalyst (Ni/Nd) using diethyl aluminum chloride and triethyl aluminum as co‐catalysts on 1,3‐butadiene (BD) conversion and physical properties of the elastomeric materials based on obtained rubber (Ni/Nd‐BR). In the presence of toluene, the increase in the Ni/Nd molar ratio from 0.0/1.0 to 0.4/0.6 yielded Ni/Nd‐BR containing cis−1,4 units of 95%–96% with significantly decreasing both levels of vinyl−1,2 and trans−1,4 configurations from 0.26% to 0.13% and 4.44% to 3.07%, respectively. When cyclohexane was applied as the reaction media, 100% BD conversion was achieved and the Ni/Nd‐BR had very low content of vinyl−1,2 unit (0.07%). The mechanical properties in terms of tensile properties and abrasion resistance of the elastomer based on Ni/Nd‐BR having high cis‐1,4 and relatively higher trans−1,4 configurations were superior to elastomers based on commercial BRs produced by using Ni‐ and Nd‐based catalyst systems. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41834.     

Printability of elastomer latex for additive manufacturing or 3D printing

Additive manufacturing, sometimes referred to as 3D printing is a new, rapidly developing technology which has the potential to revolutionize fabrication of certain high value, complex products. Until now conventional elastomers have not been widely used in the additive manufacturing process. The goal of our work was to determine the feasibility of additive manufacturing using ink jet printing of elastomeric latex materials. Particle size, viscosity, and surface tension were measured for five different latex materials—poly(2‐chloro‐1,3‐butadiene), carboxylated styrene‐butadiene rubber, carboxylated butadiene‐acrylonitrile copolymer, natural rubber, and prevulcanized natural rubber. The XSBR latex was predicted as the one most likely to be printable. Printing trials carried out with the XSBR as the ink proved it to be printable, although technical problems of agglomeration and print head clogging need to be addressed and both the material and process need to be optimized for consistent printing to be achieved. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42931.