Synthesis and characterization of biocompatible hydroxyapatite coated ferrite

Ferrite particles coated with biocompatible phases can be used for hyperthermia treatment of cancer. We have synthesized substituted calcium hexaferrite, which is not stable on its own but is stabilized with small substitution of La. Hexaferrite of chemical composition (CaO)_0.75(La₂0₃)_0.20(Fe₂O₃)₆ was prepared using citrate gel method. Hydroxyapatite was prepared by precipitating it from aqueous solution of Ca(NO₃)₂ and (NH₄)₂HPO₄ maintaining pH above 11. Four different methods were used for coating of hydroxyapatite on ferrite particles. SEM with EDX and X-ray diffraction analysis shows clear evidence of coating of hydroxyapatite on ferrite particles. These coated ferrite particles exhibited coercive field up to 2 kOe, which could be made useful for hysteresis heating in hyperthermia. Studies by culturing BHK-21 cells and WBC over the samples show evidence of biocompatibility. SEM micrographs and cell counts give clear indication of cell growth on the surface of the sample. Finally coated ferrite particle was implanted in Kasaulli mouse to test its biocompatibility. The magnetic properties and biocompatibility studies show that these hydroxyapatite coated ferrites could be useful for hyperthermia.     

Photocatalytic oxidation of low concentration 2,4-D solution with new TiO2 fiber catalyst in a continuous flow reactor.

Environmental pollution by low concentrations of 2,4-Dichlorophenoxyacetic acid (2,4-D) is a concern these days due to ever increasingly stringent regulations. Photocatalysis with immobilized TiO2 fiber is a promising oxidation method. Laboratory experiments on photocatalytic degradation of 0.045 mmol l(-1) 2,4-D with the world's first high-strength TiO2 fiber catalyst were carried out in a continuous flow reactor in which the degradations were, in general, similar to those with high 2,4-D concentrations investigated elsewhere. Degradation and mineralization of 2,4-D were significantly enhanced with no initial pH adjustments. The rate constants for total organic carbon (TOC) without pH adjustment were about two-fold bigger than the pH adjustment cases. CO2 gas measurement and carbon mass-balance were carried out for the first time, where about 34% organic carbon converted into CO2 gas during four-hour oxidation. 2,4-Dichlorophenol (2,4-DCP), phenol, benzyl alcohol and two unknowns (RT = 2.65 and 3.78 min.) were detected as aromatic intermediates while Phenol was the new aromatic in HPLC analysis. Dechlorination efficiencies were high (> 70%) in all the cases, and more than 90% efficiencies were observed in chloride mass balance. Bigger flow rates and solution temperature fixed at 20 degrees C without pH adjustment greatly enhanced 2,4-D mineralization. These results can be an important basis in applying the treatment method for dioxin-contaminated water and wastewater.     

Structure and mechanical properties of polyethylene-fullerene composites

The microhardness of films of fullerene-polyethylene composites prepared by gelation from semidilute solution, using ultrahigh molecular weight polyethylene (PE) (6×10⁶), has been determined. The composite materials were characterized by optical microscopy and X-ray diffraction techniques. The microhardness of the films is shown to increase notably with the concentration of fullerene particles within the films. In addition, a substantial hardening of the composites is obtained after annealing the materials at high temperatures (T _a=130 °C) and long annealing times (t _a=10⁵s). The hardening of the composites with annealing temperature has been identified with the thickening of the PE crystalline lamellae. Comparison of X-ray scattering data and the microhardness values upon annealing leads to the conclusion of phase separation of C₆₀ molecules from the polyethylene crystals within the material. The temperature dependence is discussed in terms of the independent contribution of the PE matrix of the C₆₀ aggregates to the hardness value.     

Discrete-time spare ordering policy with randomized lead times and discounting

The paper considers a generalized discrete‐time order‐replacement model for a single unit system, which is subject to random failure when in operation. Two types of discrete randomized lead times are considered for a spare unit; one is for regular (preventive) order and another is for expedited (emergency) order. The model is formulated based on the discounted cost criterion. The underlying two‐dimensional optimization problem is reduced to a simple one‐dimensional one and then the optimal ordering policy for the spare unit is characterized under two extreme conditions: (i) unlimited inventory time and (ii) zero inventory time for the spare unit. A numerical example is used to determine the optimal spare‐ordering policy numerically and to examine the sensitivity of the model parameters.     

Novel aspects of the microstructure of PP/PA blends prepared by reactive compounding as studied by microhardness

The microhardness of injection-moulded i-polypropylene/polyamide (iPP/PA) blends prepared by reactive compounding was determined. The formulation rules and processing technology for the preparation of these alloys was reported previously. iPP/PA compositions between 100/0 and 50/50 using functionalized PP with various degrees of mainchain grafting, were investigated. It is shown that the deviation of microhardness from the additivity law of the single components is mainly due to a decrease in the crystallinity of the iPP phase. The results are discussed in the light of the microstructural variations as revealed by X-ray diffraction methods.     

Dose-related effects of Ampligen (poly(I).poly(C12U)), a mismatched double-stranded RNA, in a bleomycin-mouse model of pulmonary fibrosis

The antifibrotic effect of the mismatched double-stranded RNA, Ampligen (poly(I).poly(C12U)), was evaluated in a bleomycin-mouse model of pulmonary fibrosis. Mice received a single intratracheal dose of bleomycin (0.125 U/mouse) or saline (50 microL) at the beginning of the experiment, followed by 5 or 6 intraperitoneal injections of Ampligen (1.0, 5.0, 10.0, 15.0, or 25.0 mg/kg) or saline at regular intervals for 2 weeks. Ampligen did not produce increased mortality or weight loss by itself. However, it produced varying degrees of mortality in combination with bleomycin. Five injections of 10 mg/kg Ampligen or three injections of 25 mg/kg Ampligen plus three injections of 10 mg/kg Ampligen in combination with bleomycin .produced significant reductions in lung collagen accumulation as indicated by lung hydroxyproline content compared to the bleomycin control group. Animals receiving bleomycin plus Ampligen at all dosages had significantly reduced prolyl hydroxylase activity compared to the bleomycin control group. Lipid peroxidation and bronchoalveolar lavage fluid (BALF)-supernatant protein content for the groups receiving bleomycin plus Ampligen were not reduced compared to the bleomycin control group. In the BALF-supernatant, the activity of acid phosphatase, a lysosomal enzyme produced by neutrophils, monocytes, and macrophages, was significantly decreased in the group receiving bleomycin plus 10 mg/kg Ampligen. Also, selected BALF differential immune cell counts were reduced in some of the groups receiving bleomycin plus Ampligen, but not in a consistent or dose-dependent manner. The results of this study indicate that Ampligen can significantly reduce the bleomycin-induced increased collagen accumulation and may be therapeutically useful in the management of lung fibrosis in humans.     

Dynamic proteome in enigmatic preeclampsia: an account of molecular mechanisms and biomarker discovery

The coevolution of genomics and proteomics has led to advancements in the field of diagnosis and molecular mechanisms of disease. Proteomics is now stepping into the field of obstetrics, where early diagnosis of pregnancy complication such as preeclampsia (PE) is imperative. PE is a multifactorial disease characterized by hypertension with proteinuria, which is a leading cause of maternal and neonatal morbidity and mortality occurring in 5-7% of pregnancies worldwide. This review discusses the probable molecular mechanisms that lead to PE and summarizes the proteomics research carried out in understanding the pathogenicity of PE, and for identifying the candidate biomarker for diagnosis of the disease.     

Selection of optimized features for fusion of palm print and finger knuckle‐based person authentication

The impact of digital technology in biometrics is much more efficient at interpreting data than humans, which results in completely replacement of manual identification procedures in forensic science. Because the single modality‐based biometric frameworks limit performance in terms of accuracy and anti‐spoofing capabilities due to the presence of low quality data, therefore, information fusion of more than one biometric characteristic in pursuit of high recognition results can be beneficial. In this article, we present a multimodal biometric system based on information fusion of palm print and finger knuckle traits, which are least associated to any criminal investigation as evidence yet. The proposed multimodal biometric system might be useful to identify the suspects in case of physical beating or kidnapping and establish supportive scientific evidences, when no fingerprint or face information is present in photographs. The first step in our work is data preprocessing, in which region of interest of palm and finger knuckle images have been extracted. To minimize nonuniform illumination effects, we first normalize the detected circular palm or finger knuckle and then apply line ordinal pattern (LOP)‐based encoding scheme for texture enrichment. The nondecimated quaternion wavelet provides denser feature representation at multiple scales and orientations when extracted over proposed LOP encoding and increases the discrimination power of line and ridge features. To best of our knowledge, this first attempt is a combination of backtracking search algorithm and 2D²LDA has been employed to select the dominant palm and knuckle features for classification. The classifiers output for two modalities are combined at unsupervised rank level fusion rule through Borda count method, which shows an increase in performance in terms of recognition and verification, that is, 100% (correct recognition rate), 0.26% (equal error rate), 3.52 (discriminative index), and 1,262 m (speed).     

Design of an Ultra-Compact and Highly-Sensitive Temperature Sensor Using Photonic Crystal Based Single Micro-Ring Resonator and Cascaded Micro-Ring Resonator

Silicon - In the present report, a photonic crystal based micro-ring resonator (MRR) structure is proposed which is very compact in size and has very fast response and is employed for temperature...