Analysis of integrated optical waveguide mirrors

A new method is presented to analyze reflection losses of integrated mirrors, taking into account the exact guided mode profile and assuming that this profile remains unchanged up to the reflecting plane. The fraction of the reflected light coupled to one of the guided modes of the output waveguide is calculated, taking into account the mirror reflection coefficient. The influence of both translation and tilt of the reflecting plane is investigated. The method applies for every guided mode and any reflection angles. Numerical calculations are derived for a 90° optical corner mirror     

Endgroup analysis of polyethylene glycol polymers by matrix-assisted laser desorption/ionization Fourier-transform ion cyclotron resonance mass spectrometry

Fourier-transform ion cyclotron resonance mass spectrometry (FTICR-MS) by external injection of matrix-assisted laser desorbed and ionized (MALDI) polymers offers good possibilities for characterization of low molecular weight homopolymers (MW range up to 10 kDa). The molecular masses of the molecular weight distribution (MWD) components of underivatized and derivatized (dimethyl, dipropyl, dibutyl and diacetyl) polyethylene glycol (PEG) 1000 and 4000 were measured by MALDI-FTICR-MS. These measurements have been performed using a commercial FTICR spectrometer with a home-built external ion source. MALDI of the samples with a 2,5-dihydroxybenzoic acid matrix in a 1000:1 matrix-to-analyte molar ratio produces sodiated molecules in a sufficient yield to trap the ions in the ICR cell. The masses of the molecular weight distribution of PEG components were measured in broad-band mode with a mass accuracy of < 5 ppm in the mass range around 1000 u and within 40 ppm accuracy around 4000 u. From these measurements, the endgroup mass of the polymer was determined by correlation of the measured component mass with the degree of polymerization. The masses of the PEG endgroups have been determined within a deviation of 3-10 millimass units for the PEG1000 derivatives and 10-100 millimass units for the PEG4000 derivatives, thus confirming the identity of the distal parts of the model compounds.     

Numerical simulation of a silicon-on-insulator waveguideFabry-Perot interferometer for intensity light modulators at 1.3 μm

We present a new silicon-on-insulator (SOI) integrated optics structure to be used as an intensity light modulator at 1.3 μm. The device consists of a waveguide Fabry-Perot interferometer. In association with a grating coupler this device could function as a spatial light modulator or a reflective-mode modulator. The Fabry-Perot reflectivity is tuned by free-carrier injection from a forward-biased lateral P⁺/N^-/N⁺ diode. Consequently, the reflected back guided-mode has an intensity that is a function of the effective index modulation in the central waveguide of the Fabry-Perot. Our numerical simulation reveals that such a structure could function for current densities not exceeding 500 A/cm² with a cutoff frequency of 100 MHz. This new type of device is compatible with the mature silicon technology and could replace in applications the standard liquid-crystal spatial light modulators or for fiber-to-the-home intensity modulators     

Tandem mass spectrometry and nuclear magnetic resonance spectroscopy studies of Candida bombicola sophorolipids and product formed on hydrolysis by cutinase

Natural mixtures of sophorolipids produced by the yeast Candida bombicola have been analyzed by fast atom bombardment (FAB)-MS and collision-induced dissociation (CID)-MS. Some pure components have been analysed by two-dimensional NMR spectroscopy. The presence of acidic, lactonic, and O-acetylated forms and the position of double bonds in the fatty acid part of these glycolipids can be easily inferred from positive and negative ion FAB-mass spectra. Details about position of O-acetylation can be obtained from CID mass spectra of [M+H]+ and [M-H]- ions and from the NMR spectra. Differences in CID fragmentation between protonated and sodiated molecular ions are discussed in detail. Enzymatic hydrolysis of 6',6"-di-O-acetyl sophorolipid lactone by cutinase from Fusarium solani results specifically in the removal of the 6'-O-acetyl group, whereas the 6"-O-acetyl and lactone group are resistant. This specificity is explained from a three-dimensional model of the sophorolipid generated on the basis of the short 1H,1H distances as inferred from the NMR (ROESY) spectra.     

Design rules for an integratable low-power amplifier/filter combination

In this paper design rules for a circuit topology in which there is an inseparable combination of an amplifier and a filter characteristic, are presented. By intentionally using the capacitance of an already present input sensor for the filtering, the total required integrated capacitance is much less than that in circuits, which have a separately designed amplifier and filter function. Consequently, it is possible to have the advantage of a better integratability. Moreover, less complexity in the design is achieved. The presented circuit shows a current-to-voltage conversion and an inherently controllable second-order low-pass filter characteristic. A discrete realization has been designed to test the circuit. This circuit operates down to a 1 V supply voltage and the transfer shows a 1.8 M currentto-voltage conversion with a bandwidth of 6 kHz. Measurement results of this circuit show that a 63 dB dynamic range can be achieved with a total required integrated capacitance of only 31 pF.     

Algorithms to Separate $\{0,\frac{1}{2}\}$ -Chvátal-Gomory Cuts

Chvátal-Gomory cuts are among the most well-known classes of cutting planes for general integer linear programs (ILPs). In case the constraint multipliers are either 0 or , such cuts are known as -cuts. It has been proven by Caprara and Fischetti (Math. Program. 74:221–235, 1996) that separation of -cuts is -hard. In this paper, we study ways to separate -cuts effectively in practice. We propose a range of preprocessing rules to reduce the size of the separation problem. The core of the preprocessing builds a Gaussian elimination-like procedure. To separate the most violated -cut, we formulate the (reduced) problem as integer linear program. Some simple heuristic separation routines complete the algorithmic framework. Computational experiments on benchmark instances show that the combination of preprocessing with exact and/or heuristic separation is a very vital idea to generate strong generic cutting planes for integer linear programs and to reduce the overall computation times of state-of-the-art ILP-solvers.     

Influence of aldehyde fixation on the morphology of endosomes and lysosomes: quantitative analysis and electron tomography

Cryoimmobilization is regarded as the most reliable method to preserve cellular ultrastructure for electron microscopic analysis, because it is both fast (milliseconds) and avoids the use of harmful chemicals on living cells. For immunolabelling studies samples have to be dehydrated by freeze‐substitution and embedded in a resin. Strangely, although most of the lipids are maintained, intracellular membranes such as endoplasmic reticulum, Golgi and mitochondrial membranes are often poorly contrasted and hardly visible. By contrast, Tokuyasu cryosectioning, based on chemical fixation with aldehydes is the best established and generally most efficient method for localization of proteins by immunogold labelling. Despite the invasive character of the aldehyde fixation, the Tokuyasu method yields a reasonably good ultrastructural preservation in combination with excellent membrane contrast. In some cases, however, dramatic differences in cellular ultrastructure, especially of membranous structures, could be revealed by comparison of the chemical with the cryofixation method. To make use of the advantages of the two different approaches a more general and quantitative knowledge of the influence of aldehyde fixation on ultrastructure is needed. Therefore, we have measured the size and shape of endosomes and lysosomes in high‐pressure frozen and aldehyde‐fixed cells and found that aldehyde fixation causes a significant deformation and reduction of endosomal volume without affecting the membrane length. There was no considerable influence on the lysosomes. Ultrastructural changes caused by aldehyde fixation are most dramatic for endosomes with tubular extensions, as could be visualized with electron tomography. The implications for the interpretation of immunogold localization studies on chemically fixed cells are discussed.     

Liar liar,pants on fire; or how to use subjective logic and argumentation to evaluate information from untrustworthy sources

This paper presents a non-prioritized belief change operator, designed specifically for incorporating new information from many heterogeneous sources in an uncertain environment. We take into account that sources may be untrustworthy and provide a principled method for dealing with the reception of contradictory information. We specify a novel Data-Oriented Belief Revision Operator, that uses a trust model, subjective logic, and a preference-based argumentation framework to evaluate novel information and change the agent’s belief set accordingly. We apply this belief change operator in a collaborative traffic scenario, where we show that (1) some form of trust-based non-prioritized belief change operator is necessary, and (2) in a direct comparison between our operator and a previous proposition, our operator performs at least as well in all scenarios, and significantly better in some.