Zika Virus Growth in Human Kidney Cells Is Restricted by an Elevated Glucose Level

Mosquito-borne Zika virus (ZIKV) became a real threat to human health due to the lack of vaccine and effective antiviral treatment. The virus has recently been responsible for a global outbreak leading to millions of infected cases. ZIKV complications were highlighted in adults with Guillain–Barré syndrome and in newborns with increasing numbers of congenital disorders ranging from mild developmental delays to fatal conditions. The ability of ZIKV to establish a long-term infection in diverse organs including the kidneys has been recently documented but the consequences of such a viral infection are still debated. Our study aimed to determine whether the efficiency of ZIKV growth in kidney cells relates to glucose concentration. Human kidney HK-2 cells were infected with different ZIKV strains in presence of normal and high glucose concentrations. Virological assays showed a decrease in viral replication without modifying entry steps (viral binding, internalization, fusion) under high glucose conditions. This decrease replication was associated with a lower virus progeny and increased cell viability when compared to ZIKV-infected HK-2 cells in normal glucose concentration. In conclusion, we showed for the first time that an elevated glucose level influences ZIKV replication level with an effect on kidney cell survival.     

Note of Caution for the Aqueous Behaviour of Metal-Based Drug Candidates

Poor aqueous solubility is one of the recurrent drawbacks of many compounds in medicinal chemistry. To overcome this limitation, the dilution of drug candidates from stock solutions of an organic solvent is common practice. However, the precise characterisation of these compounds in aqueous solutions is often neglected, leading to some uncertainties regarding the nature of the actual active species. In this communication, we demonstrate that two ruthenium complexes previously reported by our group for their chemotherapeutic potential against cancer, namely [Ru(DIP)₂(sq)](PF₆) and [Ru(DIP)₂(3-methoxysq)](PF₆), where DIP is 4,7-diphenyl-1,10-phenanthroline, sq=semiquinonate and 3-methoxysq=3-methoxysemiquinonate, form colloids in water-DMSO (1 % v/v) mixtures that are invisible to the naked eyes. [Ru(DIP)₂(3-methoxysq)](PF₆) was found to form a highly stable and monodispersed colloid with nanoaggregates of ∼25 nm. In contrast, [Ru(DIP)₂(sq)](PF₆) was found to form large reticulates of mostly spherical aggregates which size was found to increase over time. The difference in size and shape distribution of drug candidates is of tremendous significance as the study of their biological activity might be severely affected. Overall, we strongly believe that these observations should be taken into account by the scientific community working on the development of metal-based drugs with poor water solubility.     

Matrix Transformation in Boron Containing High-Temperature Co–Re–Cr Alloys

An addition of boron largely increases the ductility in polycrystalline high-temperature Co–Re alloys. Therefore, the effect of boron on the alloy structural characteristics is of high importance for the stability of the matrix at operational temperatures. Volume fractions of ε (hexagonal close-packed—hcp), γ (face-centered cubic—fcc) and σ (Cr₂Re₃ type) phases were measured at ambient and high temperatures (up to 1500 °C) for a boron-containing Co–17Re–23Cr alloy using neutron diffraction. The matrix phase undergoes an allotropic transformation from ε to γ structure at high temperatures, similar to pure cobalt and to the previously investigated, more complex Co–17Re–23Cr–1.2Ta–2.6C alloy. It was determined in this study that the transformation temperature depends on the boron content (0–1000 wt. ppm). Nevertheless, the transformation temperature did not change monotonically with the increase in the boron content but reached a minimum at approximately 200 ppm of boron. A probable reason is the interplay between the amount of boron in the matrix and the amount of σ phase, which binds hcp-stabilizing elements (Cr and Re). Moreover, borides were identified in alloys with high boron content.     

Multi-input,multi-output flight control system design for the YF-16 using nonlinear QFT and pilot compensation

Nonlinear quantitative feedback theory (QFT) and pilot compensation techniques are used to design a 2 × 2 flight control system for the YF-16 aircraft over a large range of plant uncertainty. The design is based on numerical input-output time histories generated with a FORTRAN implemented nonlinear simulation of the YF-16. The first step of the design process is the generation of a set of equivalent linear time-invariant (LTI) plant models to represent the actual nonlinear plant. It has been proven that the solution to the equivalent plant problem is guaranteed to solve the original nonlinear problem. Standard QFT techniques are then used in the design synthesis based on the equivalent plant models. A detailed mathematical development of the method used to develop these equivalent LTI plant models is provided. After this inner-loop design, pilot compensation is developed to reduce the pilot's workload. This outer-loop design is also based on a set of equivalent LTI plant models. This is accomplished by modelling the pilot with parameters that result in good handling qualities ratings, and developing the necessary compensation to force the desired system responses.     

Determination du coefficient d'extinction molaire de OH− dans les verres fluores a base de metaux lourds

The extinction coefficient ? at 2.9 μm for OH in fluoride glasses is measured by determining the amount of HF evolved during heating of the glass under steam and the corresponding intensity of the OH absorption band. This coefficient is respectively equal to 31 litre mole^?1 cm^?1 for BTYbZ glass (15 BaF₂ - 29 ThF₄ - 28 YbF₃ - 28 ZnF₂) and 19.5 litre mole^?1 cm^?1 for BALLA glass (34 BaF₂ - 57 ZrF₄ - 4 AlF₃ - 5 LaF₃).     

Circuits and techniques for high-resolution measurement of on-chip power supply noise

This paper presents a technique for characterizing the statistical properties and spectrum of power supply noise using only two on-chip low-throughput samplers. The samplers utilize a voltage-controlled oscillator to perform high-resolution analog-to-digital conversion with minimal hardware. The measurement system is implemented in a 0.13-/spl mu/m process along with a high-speed link transceiver. Measured results from this chip validate the accuracy of the measurement system and elucidate several aspects of power supply noise, including its cyclostationary nature.     

Xylene Isomerization in a ZSM-5/SS Membrane Reactor

A membrane reactor containing different types of ZSM-5/porous SS membranes was used to perform the xylene isomerization reaction. The parent Na-ZSM-5 layer was synthesized by secondary growth on top of porous stainless steel tubes. The xylene isomerization reaction was carried out at different temperatures in the membrane reactor and in a fixed-bed reactor of identical geometry for comparison. Two different kinds of membranes were prepared by ion exchange: a Pt/H-ZSM-5 catalytic membrane and two Ba-ZSM-5 composites with different Ba²⁺ concentration. The p-xylene production using 100% exchanged Ba-membrane was about 28% higher than the fixed-bed reactor at 370 °C, when m-xylene was fed.     

JaTS: a fully portable seismic tomography software based on Fresnel wavepaths and a probabilistic reconstruction approach

JaTS, a Java 2D seismic tomography software, is presented. It implements original algorithms achieving optimal accuracy with reasonable computing costs. A second-order Fast Marching Method (FMM) is used for solving the eikonal equation, therefore enabling a fast and robust computation of seismic traveltimes between sources and receivers. The wavepaths are materialized by Fresnel volumes rather than by conventional rays. This approach accounts for complex velocity models and has the advantage of considering the effects of the wave frequency in the velocity model resolution. The model is computed by a Simultaneous Iterative Reconstruction Technique (SIRT) which has been reformulated to integrate Fresnel wavepaths by using a probabilistic approach. In addition, various utilities are implemented, such as a tapering filter, used to decrease artifact effects occurring in the vicinity of the sources and receivers. The software also offers the possibility of reconstructing the velocity field on a grid larger than the one used for the wave propagation computation. This contributes to stabilize the estimated values. All of the seismic processing tools have been integrated with a user-friendly graphical interface. JaTS represents a tightly integrated tool suite that supports the entire process of importing the SG2 field records, first-break picking, forward modeling and velocity-field computing across multiple platforms.     

EM procedures using mean field-like approximations for Markov model-based image segmentation

Image segmentation using Markov random fields involves parameter estimation in hidden Markov models for which the EM algorithm is widely used. In practice, difficulties arise due to the dependence structure in the models and approximations are required. Using ideas from the mean field approximation principle, we propose a class of EM-like algorithms in which the computation reduces to dealing with systems of independent variables. Within this class, the simulated field algorithm is a new stochastic algorithm which appears to be the most promising for its good performance and speed, on synthetic and real image experiments.