Superradiant Emission from Coherent Excitons in van Der Waals Heterostructures

Recent advancements in isolation and stacking of layered van der Waals materials have created an unprecedented paradigm for demonstrating varieties of 2D quantum materials. Rationally designed van der Waals heterostructures composed of monolayer transition-metal dichalcogenides (TMDs) and few-layer hBN show several unique optoelectronic features driven by correlations. However, entangled superradiant excitonic species in such systems have not been observed before. In this report, it is demonstrated that strong suppression of phonon population at low temperature results in a formation of a coherent excitonic-dipoles ensemble in the heterostructure, and the collective oscillation of those dipoles stimulates a robust phase synchronized ultra-narrow band superradiant emission even at extremely low pumping intensity. Such emitters are in high demand for a multitude of applications, including fundamental research on many-body correlations and other state-of-the-art technologies. This timely demonstration paves the way for further exploration of ultralow-threshold quantum-emitting devices with unmatched design freedom and spectral tunability.     

Characterization of virus replication

New viruses spread faster than ever and current signature based detection do not protect against these unknown viruses. Behavior based detection is the currently preferred defense against unknown viruses. The drawback of behavior based detection is the ability only to detect specific classes of viruses or have successful detection under certain conditions plus false positives. This paper presents a characterization of virus replication which is the only virus characteristic guaranteed to be consistently present in all viruses. Two detection models based on virus replication are developed, one using operation sequence matching and the other using frequency measures. Regression analysis was generated for both models. A safe list is used to minimize false positives. In our testing using operation sequence matching, over 250 viruses were detected with 43 subsequences. There were minimal false negatives. The replication sequence of just one virus detected 130 viruses, 45% of all tested viruses. Our testing using frequency measures detected all test viruses with no false negatives. The paper shows that virus replication can be identified and used to detect known and unknown viruses.     

Laser micro-welding of aluminum and copper with and without tin foil alloy

In this paper continuous laser welding of two dissimilar materials, aluminum and copper, was investigated. The aluminum and the copper utilized were Al3003-H14 and Cu110-H00, respectively. Two different sets of samples were laser welded; one in which a filler material, tin foil alloy (S-bond 220), was sandwiched between the aluminum and the copper and another set in which the aluminum and copper were directly welded without any filler. The foil alloy was utilized to enhance the compatibility of the two metals; aluminum and copper, reducing the brittleness of the intermetallic compound that may form and, subsequently, enhance the mechanical properties. The welding was carried out using an IPG 500 SM fiber laser. The length of the laser joint produced was 20 mm and the width was about 200 μm. The strength of the joint was evaluated by conducting the lap shear stress test. Samples in which filler foil was used exhibited a better performance in the lap shear stress test (an average of 780 N) than the samples without tin foil (an average of 650 N). The improvement in the lap shear test could be attributed to the positive effects of the filler on enhancing the compatibility of the intermetallic compound formed via diffusion. The fracture surface of both types of joints (with and without filler) was characterized using scanning electron microscope equipped with energy-dispersive X-ray (EDAX). To understand the failure initiation and propagation of the samples under tension, a finite element (FE) model was developed for the samples created with no filler material. The failure mechanism predicted from the FE model matches reasonably well with the experimental observations from EDAX analysis.     

Adapting technology: effect of high-involvement HRM and organisational trust

This study is designed to empirically test a model of high-involvement human resource management (HIHRM), organisational trust, and technology adaptation grounded on social exchange theory in the context of the private banking sector. The proposed model intends to add to the understanding of the effect of HIHRM on technology adaptation via the mediating influence of organisational trust. Frontline employees were surveyed using a self-administered questionnaire. Results from partial least square-structural equation modelling suggest that there is a significant influence of HIHRM on technology adaptation. Organisational trust further mediates the relationship. Thus, this paper finds an answer to the ‘black box’ of human resource management (HRM) practices, explaining how HIHRM influences employees’ attitudes towards technology adaptation. The study can help management have a better understanding of the importance of employee involvement-oriented HRM in introducing and implementing a new technology through the integration of trust processes in the organisation.     

Effects of cold rolling process variables on final surface quality of stainless steel thin strip

In cold rolling some surface defects, known as pits, are due to lubricant that, entrapped in the deep valleys of the surface roughness, is nearly incompressible and acts like an inclusion avoiding microcavity elimination. During the rolling process, when specific favorable conditions can be set up, the lubricant may be expelled by the microplasto-hydrodynamic lubrication (MPHL) mechanism and pits may be recovered. In this paper the Λ_m parameter, index of the MPHL, is investigated together with the neutral point position to better understand the practical process recommendations for surface defect recovery. By means of finite element analysis of a Sendzimir’cold rolling process, the sensitivity of these objective functions are studied by means of a design of experiment analysis changing the major process variables like back tension, friction coefficient, reduction parameter, initial thickness, and roll diameter.     

Processing effects and damage tolerance in poly(etheretherketone) composites

Thermoplastic composites in general have been found to display improved resistance to impact damage over their thermosetting counterparts. However, in earlier work, we presented data that suggested that in poly(etheretherketone) (PEEK) based composites, damage tolerance may be adversely affected if cooling rates are too slow in the processing of these parts. In this work, ultrasonic C-scan and compression-after-impact testing were implemented on PEEK APC-2 plaques cooled at three different cooling rates, in addition to toughened epoxy and bismaleimide plaques processed conventionally as a comparison. It was found that the damaged areas as measured ultrasonically varied significantly between the PEEK samples cooled at different rates, and that under the slowest cooling conditions, the damaged areas approached those of the thermosetting systems tested. However, because compressive strengths before impact were found to be greater on slow cooling, the differences in compression-after-impact were less dramatic than one would have expected from the C-scan results alone. Variations in crystallinity as well as spherulite size were the source for the differences in damaged areas as well as in compressive strength.     

Oxidation stability and compositional characteristics of oils from microwave roasted pumpkin seeds during thermal oxidation

The oxidative stability and compositional characteristics of the pumpkin seed oil (PSO) exposed to microwaves were studied during heating at 170°C. The oxidative indices such as free fatty acid (FFA), peroxide value (PV), p-anisidine value (p-AV), TOTOX, specific extinctions and thiobarbituric acid (TBA) value of oils were significantly increased, and the increments were found to be significantly higher (P < 0.05) in unroasted seed oil as compared to roasted seed oil. The relative contents of polyunsaturated fatty acids (PUFAs) were decreased to 84.7%, and saturated fatty acids (SFAs) were increased to 119.5% in unroasted sample, after 9 h of heating. On the other hand, in 12 min roasted samples, the relative contents of PUFAs were decreased to 97.0%, and SFAs were increased to 102.6% after 9 h of heating. The triacylglycerol species LLL and OLL levels were decreased as a consequence of increased heating time, and the reduction tended to be significantly higher in unroasted samples as compared to roasted ones. The oxidation products formed were also investigated by FTIR. The present results indicated that microwave roasting of pumpkin seeds markedly enhanced the oxidative stability of the oils during heating.     

Synthesis,Characterization and Catalytic Activities of Palladium(II) Nitroaryl Complexes

Two palladium(II) nitroaryl complexes trans-[bromo(p-nitrophenyl)bis(triphenylphosphine)palladium(II)] 1 and trans-[bromo(2,4-dinitrophenyl)bis(triphenylphosphine)palladium(II)] 2 have been synthesized. The complexes were characterized by FTIR and NMR (¹H, ¹³C and ³¹P) spectroscopy and elemental analysis. The molecular structure of complex 2, as confirmed by X-ray crystallography, reveals that the Pd atom and its neighboring groups (two PPh₃, Br and phenylene group) lie in a slightly distorted square plane. In the UV–Vis spectra of the complexes 1 and 2, the palladium to aryl charge transfer bands were observed. The emission peaks from the singlet excited states (S₁ → S₀) were observed in the photoluminescence spectra of the complexes. The thermal stability of the complexes has been studied by thermal gravimetric analysis (TGA). TGA data showed that both complexes are thermally stable up to 200 °C, and complex 1 is more stable than 2. The catalytic efficiency of the new palladium(II) complexes was studied as demonstrated using the Sonogashira coupling reactions with good yields. The experimental results suggest that the Sonogashira coupling reactions can be performed at moderate temperature (50 °C) using these new palladium(II) complexes as catalysts.     

Tooling device design for vibration-assisted high speed shaping of PMMA

PMMA optical components that are used as one of the most important parts of high precision equipments and machines are increasingly replacing the glass due to the various advantages of PMMA. Especially in Light Guide Panels, the PMMA sheet that is used in Liquid Crystal Displays plays an important role in scattering the incident light and requires very fine machining as the sheet is directly related to the optical characteristics of the panels. The High Speed End milling and High Speed Shaping processes that are widely adopted and applied to the precise machining of Light Incident Plane still have quality problems, such as cracks, breakages, poor waviness, and straightness. This paper presents the tooling device design for machining a Light Incident Plane through vibration-assisted High Speed Shaping for increasing the optical quality by minimizing the above-mentioned problems. The cutting tool and the tool post presented in this paper are designed by the authors to increase the magnitude of the cutting stroke by adopting the resonant frequency without weakening the stiffness and to reduce vibrations during even high speed feeding. The dynamic characteristics of the cutting tool and the tool post are evaluated through simulation and experiment as well. The results reveal very appropriate dynamic characteristics for vibration-assisted High Speed Shaping.