Corrosion Behavior of 316LN and 316 Stainless Steels During Long-term Exposure to Aerated 0.5 M NaCl Using Electrochemical Noise Technique

In the present work 316LN as well as 316 stainless steel (SS) coupons each of dimensions (0.025 × 0.018 × 0.006 m³) in well-polished condition were used as two nominal electrodes which were immersed in the aerated solution of 0.5 M NaCl. Correlated current and potential electrochemical noise (EN) signals were collected at 1 Hz sampling frequency for 1 h daily over a period of 30 days. The detrended EN data were used to calculate the noise resistance (R _N) as well as the spectral noise resistance at zero frequency (R _SN^o) values and other statistical parameters. To study the nature of pits and distribution of their diameters as well as depths, extensive observations of the pitted and the blank specimens were carried out using Confocal Laser Scanning Microscopy (CLSM). The current and the potential records of the two alloys showed distinct differences in their corrosion behavior. It was observed that within less than 4 h of immersion, 316SS showed signals indicative of unstable pitting and onset of stable pitting was noticed after 48 h of exposure. However, until about 24 h, 316LN showed just the random signals and unstable pitting was observed after 28 h. The signals clearly indicated continuous growth of the stable pits in 316SS as against the repassivation of the unstable pits in 316LN after 7 days exposure. It was observed that R _N values showed a continuous decrease in the case of 316SS, but were quite stable in the case of 316LN over the exposure period. Concurrent to these observations it was observed that 316SS specimen was extensively pitted. The frequency distributions of pit diameters as well pit depths were observed to be highest at 10-20 μm and 5-10 μm, respectively. However, pits with as large as 70-80 μm diameter and as deep as 20-25 μm too were observed. No pits were observed in case of 316LN even after 30 days of exposure, an observation that corroborates well with the stable R _N values. Thus, in the present investigation, the long-term tests using EN technique coupled with CLSM studies conclusively prove that many unstable pits initiated in 316SS turn into stable ones resulting in insidious localized corrosion attack whereas the unstable pits initiated in 316LN get passivated in the simulated coastal environment.     

Ultrasonic nondestructive evaluation of fibre-reinforced composite materials — a review

A framework is presented for examining the effectiveness of limiting and modelling arguments used in the analysis of fluid flows. It consists of examining the consequences of the arguments on the flow problem as a whole and breaking down the limiting/modelling process into a sequence of steps and associated sequence of flow problems, termed here as ‘lidels’. The notion of validity of lidels is given. Several examples are given to explain the present approach. Invited general lecture at 3rd ACFM, Tokyo, September 1986     

Sulfur-related air pollutants induce the generation of platelet-activating factor, 5-lipoxygenase- and cyclooxygenase-products in canine alveolar macrophages via activation of phospholipases A2

Recent studies have shown that long-term in vivo exposure of dogs to neutral sulfur(IV)/sulfite aerosols induces mild inflammatory reactions, whereas the combination of neutral sulfite with acidic sulfur(VI)/sulfate aerosols evokes less pronounced effects. To understand underlying mechanisms, we studied in vitro the role of lipid mediators in the responses of alveolar macrophages (AMs) to sulfur-related compounds under neutral (pH 7) or moderate acidic (pH 6) conditions. Canine AMs incubated with sulfite at pH 7 released threefold higher amounts of platelet-activating factor than control (P < 0.005). Generation of arachidonic acid, leukotriene B4, 5-hydroxy-eicosatetraenoic acid, prostaglandin E2, thromboxane B2 and 12-hydroxyheptadecatrienoic acid increased twofold (P < 0.0005). However, these metabolites remained unchanged following incubation of AMs with sulfite at pH 6 or with sulfate at pH 7 or pH 6. Mediator release by sulfite-treated AMs at pH 7 stimulated respiratory burst activity of neutrophils. Inhibition of MAPK pathway by PD 98059, of cytosolic (cPLA2) and secretory phospholipases A2 by AACOCF3 and thioetheramide-PC, respectively, reduced sulfite-induced eicosanoid formation in AMs. Sulfite activated cPLA2 activity twofold at pH 7. This mechanism of sulfite-stimulated responses in phospholipid metabolism predicts that chronic exposure to sulfur(IV)/sulfite is associated with a considerable health risk.     

Two structural adaptations for regulating transmitter release at lobster neuromuscular synapses

The distal accessory flexor muscle (DAFM) in the lobster (Homarus americanus) walking leg consists of 5 muscle fiber bundles. All five bundles, one proximal, one distal, and 3 medial, are innervated by one excitatory and one inhibitory motor neuron. Both neurons release more transmitter on the distal bundle than on the proximal bundle. The aim of our studies was to investigate the structural basis of this differentiation. Thin sections cut at 50 microns intervals showed a similar number of excitatory synapses on the two bundles. Freeze-fracture views of excitatory synapses showed that synapse size, active zone number per synapse, and intramembrane particle density in the postsynaptic membrane are similar proximally and distally. Active zones at synapses on the distal bundle are larger and contain about 50% more large intramembrane particles, which are thought to include the voltage-gated Ca2+ channels that couple the action potential to transmitter release, than their counterparts on the most proximal bundle. This difference in channel number appears to produce a disproportionate increase in the probability of transmitter release sufficient to account for most of the proximal-distal disparity in the amplitude of the excitatory postsynaptic potential. In contrast, staining the inhibitor for antibodies to the inhibitory neurotransmitter, GABA, showed that it forms more varicosities on the distal bundle than on the proximal bundle. Because most of the synapses are located in the varicosities, differences in synapse number likely regulate the proximal-distal disparity in the amount of inhibitory transmitter released. Therefore, the regional differentiation in the amount of transmitter released in the DAFM appears to be based on two distinct mechanisms. In the inhibitor, transmitter release appears to be regulated differentially by differences in synapse number. In the excitor, transmitter release appears to be regulated differentially from a similar number of synapses by differences in active zone structure.     

Yield optimization for complex reactor systems

For complex reactions, the choice of reactor type is important for attaining optimum product yields. Strategies for specifying reactor types have beenIn this paper, product yield in a Van de Vusse reaction scheme has been studied for a wide range of the rate constants, in a reactor system consisting     

Hot isostatic pressed pyrochlore glass-ceramics: Revealing structure insides at the reaction interface

As potential waste forms for immobilizing actinide-rich radioactive wastes, Eu₂Ti₂O₇ (Eu as a surrogate for minor actinides) pyrochlore glass-ceramics were fabricated via hot isostatic pressing (HIPing) at 1200°C. The structure and microstructure at the reaction interface between the glass-ceramic waste form and the stainless steel (SS) canister under HIPing conditions were carefully investigated with scanning electron microscopy (SEM), transmission electron microscopy (TEM), and synchrotron single crystal X-ray diffraction (SC-XRD). The interactions at the reaction interface led to the formations of a ~10-µm-thick Cr₂O₃ layer as the oxidation front of the SS and a layer of a mixed oxide phase (Eu_1.25SiCr_0.8Ti_1.2O_7.5) on the glass-ceramic side of the reaction interface. The crystal structure of such a unique mixed oxide phase was revealed indubitably with a combination of synchrotron SC-XRD and TEM assisted with a focused ion beam (FIB) SEM system. The improved structural understanding of the reaction interface will help to support the utilization of HIPing as a versatile hot consolidation process for the treatment of radioactive wastes.     

Hydrogen effects on the passive film formation and pitting susceptibility of nitrogen containing type 316L stainless steels

The effects of hydrogen on the passivity and pitting susceptibility of type 316L stainless steels have been investigated with alloys containing different nitrogen contents (0.015, 0.198 and 0.556 wt.% N). The study revealed that electrochemically pre-charged hydrogen significantly reduced the pitting resistance of alloys conatining 0.015 and 0.198 wt.% nitrogen contents. In alloy with highest nitrogen content (0.556 wt.% N), an increase in the passive film current density with hydrogen was observed without affecting breakdown potential. Auger electron spectroscopy (AES) analysis of the passive film indicated the presence of nitrogen in the passive film. On other hand, for hydrogen charged samples, nitrogen was found to be significantly less in the passive film. In Electrochemical impedance spectroscopy (EIS) measurement, the decrease in semi-circle radius of Nyquist plot, and the polarization resistance, R_P associated with the resistance of the passive film was observed with hydrogen, indicating that hydrogen decreased the stability of the passive film. The present investigation indicated that precharged hydrogen deteriorated the passive film stability and pitting corrosion resistance in these alloys, and the increase in nitrogen content of the alloy offsets the deleterious effect of precharged hydrogen.     

Density Displays for Data Stream Monitoring

In many business applications, large data workloads such as sales figures or process performance measures need to be monitored in real‐time. The data analysts want to catch problems in flight to reveal the root cause of anomalies. Immediate actions need to be taken before the problems become too expensive or consume too many resources. In the meantime, analysts need to have the “big picture” of what the information is about. In this paper, we derive and analyze two real‐time visualization techniques for managing density displays: (1) circular overlay d isplays which visualize large volumes of data without data shift movements after the display is full, thus freeing the analyst from adjusting the mental picture of the data after each data shift; and (2) variable resolution density displays which allow users to get the entire view without cluttering. We evaluate these techniques with respect to a number of evaluation measures, such as constancy of the display and usage of display space, and compare them to conventional d isplays with periodic shifts. Our real time data monitoring system also provides advanced interactions such as a local root cause analysis for further exploration. The applications using a number of real‐world data sets show the wide applicability and usefulness of our ideas.     

Fuzzy logic techniques for navigation of several mobile robots

In this paper, navigation techniques for several mobile robots as many as one thousand robots using fuzzy logic are investigated in a totally unknown environment. Fuzzy logic controllers (FLC) using different membership functions are developed and used to navigate mobile robots. First a fuzzy controller has been used with four types of input members, two types of output members and three parameters each. Next two types of fuzzy controllers have been developed having same input members and output members with five parameters each. Each robot has an array of ultrasonic sensors for measuring the distances of obstacles around it and an infrared sensor for detecting the bearing of the target. These techniques have been demonstrated in various exercises, which depicts that the robots are able to avoid obstacles as well as negotiate the dead ends and reach the targets efficiently. Amongst the techniques developed, FLC having Gaussian membership function is found to be most efficient for mobile robots navigation.     

Comparative Study of the Different Variants of the DV-Hop Based Node Localization Algorithms for Wireless Sensor Networks

Wireless Personal Communications - Node localization is one of the essential services where sensor nodes in the wireless sensor network collaborate to provide location information of sensor nodes...