Clarification of a wheat straw‐derived medium with ion‐exchange resins for xylitol crystallization

BACKGROUND: Xylitol bioproduction from lignocellulosic residues comprises hydrolysis of the hemicellulose, detoxification of the hydrolysate, bioconversion of the xylose, and recovery of xylitol from the fermented hydrolysate. There are relatively few reports on xylitol recovery from fermented media. In the present study, ion‐exchange resins were used to clarify a fermented wheat straw hemicellulosic hydrolysate, which was then vacuum‐concentrated and submitted to cooling in the presence of ethanol for xylitol crystallization. RESULTS: Sequential adsorption into two anion‐exchange resins (A‐860S and A‐500PS) promoted considerable reductions in the content of soluble by‐products (up to 97.5%) and in medium coloration (99.5%). Vacuum concentration led to a dark‐colored viscous solution that inhibited xylitol crystallization. This inhibition could be overcome by mixing the concentrated medium with a commercial xylitol solution. Such a strategy led to xylitol crystals with up to 95.9% purity. The crystallization yield (43.5%) was close to that observed when using commercial xylitol solution (51.4%). CONCLUSION: The experimental data demonstrate the feasibility of using ion‐exchange resins followed by cooling in the presence of ethanol as a strategy to promote the fast recovery and purification of xylitol from hemicellulose‐derived fermentation media. Copyright © 2008 Society of Chemical Industry     

Effect of hot pressing on processing and properties of BBN ceramics

BBN (BaBi₂Nb₂O₉) is very interesting and promising lead free material with relaxor properties in capacitors, sensors and actuators.     

Analytical determination of intrinsic permeability of synthetic nonwoven filter fabrics

In this paper an analytical method for determining the permeability of nonwoven filter fabrics is presented. The derived formula shows that the intrinsic permeability, fully characterizing the porous medium, depends on fabric porosity, n, fibre diameter, d, and a shape factor determined experimentally.     

Polyurethane foams with 1,3‐pyrimidine ring

Attempts of obtaining of polyurethane foams using polyetherols with 1,3‐pyrimidine ring (obtained in reactions of 6‐aminouracil with oxiranes) are reported. Properties of the foams are investigated, especially their thermal stability. The foams show an improved thermal stability up to 200°C for a long time. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Influence of the amount of ferromagnetic addition on the rheological properties of spinning solutions,the structure,the strength,and thermal properties of polyacrylonitrile fibres

The rheological properties of spinning solutions of polyacrylonitrile in dimethyl formamide (DMF) containing various amounts of a ferromagnetic nanoaddition were investigated. The porous structure, the strength and thermal properties of fibers obtained from these solutions were assessed, as well as the uniformity of the nanoaddition distribution on the fiber surface was estimated. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Potentiometric studies of oxidation–reduction reactions with redox copolymers

Polymeric oxidants in the bead form that were macroporous styrene/divinylbenzene copolymers containing N‐chlorosulfonamide functional groups (in sodium or hydrogen form) or N‐bromosulfonamide groups (in sodium form) were synthesized and investigated to determine their oxidizing powers. The redox potentials of the N‐chlorosulfonamide/sulfonamide and N‐bromosulfonamide/sulfonamide systems were determined by potentiometric studies at different pH values with aqueous solutions of Na₂SO₃, KCN, and KSCN as reducers. The formal redox potentials of the N‐chlorosulfonamide copolymers were 0.79, 0.44, and ?0.12 V at pH's of 1.8, 8.45, and 13.6, respectively. The formal redox potential of the N‐bromosulfonamide copolymer was about 100 mV higher in comparable conditions and in solutions over pH = 5 (e.g., 0.56 V at pH = 8.56). The comparatively higher oxidizing power of the N‐bromosulfonamide copolymer was particularly evident in a strong alkaline medium (in which the N‐chlorosulfonamide copolymer was not reactive). In contrast, the N‐chlorosulfonamide copolymer showed strong oxidative properties in acidic media (in which the N‐bromosulfonamide copolymer decomposed itself). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Determination of porous glass surface free energy components from contact angles

The contact angles of water drops and diiodomethane drops on pellets made of controlled porosity glasses have been measured. The surface of the glasses was modified by thermal treatment at 873 K which led to an increase in the surface concentration of boron atoms. Glass modified with Carbowax 20M (polyethylene glycol) and fully hydroxylated glass have also been studied. Using the measured contact angles and modified Young equation, the dispersion and nondispersion components of the glass surface free energy have been calculated. The values show that with increasing heating time (increasing surface density of boron atoms) an increase in the surface polarity takes place. However, the polarity of the same samples decreases after treatment with Carbowax, increasingly so with higher boron atom concentrations.     

Allotropic phase transformations induced by ultraviolet power laser irradiation of graphite

Optically induced allotropic phase transformations of carbon were studied. Under irradiation with a laser beam of 337.1 nm wavelength, at an energy density of 1.9 mJ per 0.1 mm², graphite transformed into -carbin, and amorphous carbon-film transformed into rhombohedral graphite with no evidence of high-temperature effects. The transformations differ from the changes occurring due to heating alone. We suggest that the results could be explained by the one-photon excitation and recombination of electrons.     

Allotropie phase transformation induced by UV power laser irradiation of boron nitride

The optically induced allotropic phase transformations of boron nitride were studied. Under irradiation with laser beam of 337.1 nm wavelength, at energy density of 1.9mJ per 0.1 mm² a hexagonal boron nitride transformed into the cubic form. The suggestion is made that the results obtained could be explained by the multiphoton excitation and recombination of electrons.     

Spin singlet-triplet states of superfluid Fermi liquids in the presence of strong magnetic fields

The unitary singlet-triplet states of superfluid Fermi liquids are investigated in the presence of strong magnetic fields. The static spin susceptibility is calculated in the limith 0 in the framework of the weak coupling approximation. It is predicted that BS (a mixture of the Balian- Werthamer anisotropic state andD-wave singlet state) and 2DS (a mixture of the planar 2D state andD-wave singlet state) spin singlet-triplet states become stable at some temperatures and magnetic fields.