A first-principles investigation on mechanical and metallic properties of titanium carbides under pressure

The titanium carbides are potential candidates to achieve both high hardness and refractory property. We carried out a structural search for titanium carbides at three pressures of 0 GPa, 30 GPa and 50 GPa. A phase diagram of the Ti-C system at 0 K was obtained by elucidating formation enthalpies as a function of compositions, and their mechanical and metallic properties of titanium carbides were investigated systematically. We also discussed the relation of titanium concentration to the both mechanical and metallic properties of titanium carbides. It has been found that the average valence electron density and tractility improved at higher concentrations of titanium, while the degree of covalent bonding directionality decreased. To this effect, the hardness of titanium carbide decreases as the content of titanium increases. Our results indicated that the titanium content significantly affected the metallic properties of the Ti-C system.     

Fastmet工艺评述

介绍了Ｆａｓｔｍｅｔ工艺及发展状况，并对工艺特点和指标进行了分析。使用冷固结含碳球团和转底炉使该工艺可直接采用粉矿和提高生产效率，但因硫含量高、铁品位低而产品质量较差。不过投资和生产成本与传统工艺比较却占有较大优势。     

Crystal growth of selected II–VI semiconducting alloys by directional solidification: Part I Ground-based experiments

A series of Hg_0.84Zn_0.16 Te crystal ingots have been grown from pseudobinary melts by the Bridgmam–Stockbarger type directional solidification using a Marshall Space Flight Center/Space Science Laboratory heat-pipe furnace and the ground control experiment laboratory furnace of the crystal growth furnace which was flown on the first United States Microgravity Mission. A number of translation rates and a series of hot- and cold-zone temperatures were employed to assess the influence of growth parameters on the crystal properties for the purpose of optimizing the in-flight growth conditions. This revised version was published online in November 2006 with corrections to the Cover Date.     

三聚甲醛萃取—精馏新工艺及过程优化

本文对采用Ｓ１和Ｓ２的混合物作为萃取剂的三聚甲醛萃取－精馏新工艺进行了模拟计算，得到了使总费用最低的三聚甲醛精制工艺的联合操作参数。模拟计算结果成功地指导了小试操作，并可为大型工程设计提供可靠的基础数据。     

Air bearing design, optimization, stability analysis andverification for sub-25 nm flying

Three sub-25 nm fly height sliders are presented for near contact recording. The designs are geared towards the goal of achieving 10 Gb/in ² areal density. The optimization procedure presented shows promise for facilitating achievement of this goal. The dynamic simulations show the stability of these designs when disturbed from their steady state conditions     

Determination of the liquidus lines and isotherms of the Hg-Zn-Te system by a modified direct observation method

The modified direct observation method is employed for the determination of the liquidus lines in the (Hg_{1_x}Zn_x)_{1_y}Te_y, ternary system. The liquidus temperatures of the ternary samples of various compositions withx from 0.05 to 0.30 andy from 0.5 to 0.9 are measured. The temperature-composition phase diagrams and some liquidus isotherms are established for this system.     

SO_3磺化法合成PNTS新工艺的研究

本文采用正交设计及方差分析法,确定了 SO_3磺化法合成 PNTS 新工艺的最佳工艺条件;并从技术及经济方面将新工艺同国内现有的生产老工艺进行了分析对比。     

光纤数字环路载波系统的发展

ＯＤＬＣ是当今用户接入网的新型设备，它一方面可取代端局，解决通信线路紧张和远距离大容量放号问题，另一方面也可满足日益增多的增值业务的需求。本文ＯＤＬＣ技术的基本原理，结合目前国内外常见ＯＤＬＣ系统，总结和对比了其基本特点，优势，并指明ＯＤＬＣ的技术发展方向和中国应用的前景。     

网带式连续烧结炉炉温及网带速度微机控制系统

本文介绍一个基于ＳＴＤ总线的单片机网带式连续烧结炉炉温及网带速度控制系统，详细叙述了系统的硬件结构和控制算法。