Graded evolution of anisotropic microstructure during sintering from crystal-oriented powder compact

Anisotropic sintering, including shrinkage and grain growth, was examined for c-axis-oriented (Sr,Ca)₂NaNb₅O₁₅ (SCNN) ceramics, which were prepared by colloidal processing under a magnetic field. In the c-axis-oriented SCNN powder compact, shrinkage and grain growth along the c-axis were higher than those along the a-axis. The anisotropic microstructural development was clearly associated with anisotropic sintering shrinkage. X-ray diffraction, scanning electron microscopy, and energy back scattering diffraction showed that the grain growth of oriented particles by including random grains contribute to the development of the oriented microstructure. Finally, the highly crystal-oriented SCNN ceramics with a densified microstructure were obtained through anisotropic sintering. These results clearly showed the potential to develop a well-defined anisotropic microstructure during sintering by designing and controlling the particle packing structure in a powder compact.     

Pilot Plant Study of Simultaneous Sewage Sludge Digestion and Metal Leaching

This research is related to a preindustrial pilot scale study of the performance of the simultaneous sewage sludge digestion and metal leaching (SSDML) process for decontamination and stabilization of sewage sludge. Ten batch tests were carried out in two 4?m3 bioreactors under various conditions of operation. Results indicated that the addition of 1.0 to 1.5?g?S0/L, which is the equivalent of approximately 30 to 50?kg?S0 per tons dry sludge, is sufficient to obtain conditions of acidity (pH<2.5) and oxido-reduction potential greater than 500 mV necessary for an effective solubilization of toxic metals. The final average of metal solubilization in the output sludge during the SSDML process varied in the following ranges: 25–78% Cd, 9–32% Cr, 48–100% Cu, 77–99% Mn, 15–53% Ni, 12–47% Pb, and 66–100% Zn. The N, P, and K contents were also preserved in the decontaminated sludge. Moreover, the use of low concentrations of elemental sulfur makes it possible to obtain decontaminated sludge with a low total sulfur content (1.4–1.5% S) compatible with agricultural use. The suspended solids removal calculated for the SSDML process was slightly lower, (2.5±0.4)% volatile suspended solids per day, than those reached using standard aerobic digestion. Finally, the SSDML process was found to be effective in removing bad odors and in the destruction (99–100%) of indicator bacteria.     

Murine thymic lymphoma is associated with a species-specific hematopoietic progenitor cell subpopulation

Many strains of laboratory mouse are uniquely susceptible to the development of T cell lymphoma/leukemia, either spontaneously or as a result of chemical or radiation exposure. In contrast, T cell leukemias or lymphomas which are relatively uncommon in human populations, are not easily induced by radiation, and are not generally associated with chemotherapy or chemical exposure. Evidence is presented to suggest that differences in the susceptibility to the development of these malignancies is related to subtle but important variations in the regulation of hematopoietic stem cell differentiation between these two species.     

Treatment of hypertension in nondiabetic renal disease

To clarify whether long-term impaired glucose tolerance (IGT) is associated with dysfunction of peripheral and autonomic nerves, age-matched men with IGT and diabetes mellitus were followed prospectively for 12-15 years, when peripheral and autonomic nerve function was assessed. The patients comprised four subgroups: (1) 51 IGT subjects (duration of IGT at least 12-15 years); (2) 35 diabetic patients, with IGT 12-15 years ago, who later developed diabetes; (3) 34 diabetic patients, duration of diabetes at least 12-15 years; and (4) 62 age-matched non-diabetic control subjects. Mean age of the whole study population was 61 +/- 2 years (mean +/- SD), not different in the four groups. Peripheral nerve function tests included nerve conduction velocities, amplitudes, distal latencies, F-reflexes, and sensory perception thresholds for heat, cold, and vibration. Autonomic nerve function tests included the heart rate reaction during deep breathing (expiration to inspiration ratio) and to tilt (acceleration and brake indices). Despite 12-15 years of IGT, peripheral nerve function did not differ between IGT and control subjects, whereas autonomic nerve function deviated; an abnormal expiration to inspiration ratio (a sign of vagal nerve dysfunction) was significantly more common (15/51 versus 5/62; p < 0.01) in IGT than in control subjects. Diabetic patients (groups 2 and 3) showed lower conduction velocities (in general 2-4 m s-1 lower) than IGT and control subjects in all tested nerves. In conclusion, diabetes but not IGT, is associated with peripheral nerve dysfunction.     

Multi-functional biochip for medical diagnostics and pathogen detection

We describe a multi-functional biochip (MFB), which uses two different types of bioreceptors, including nucleic acid and antibody probes, on a single platform. The multi-functional capability of the MFB device for biomedical diagnostics is illustrated by measurements of DNA probes specific to gene fragments of Bacillus anthracis and antibody probes targeted to Escherichia coli. Calibration curves for monitoring pathogenic species using antibody probes against E. coli and DNA probes for B. anthracis illustrate the capability of the device for medical diagnostics and for quantitative detection of pathogenic agents.     

Exit effect on hydrodynamics of the internal circulating fluidized bed riser

This is the first time an extensive investigation has been carried out regarding the effects of riser exit geometry on pressure drop and solid behaviour inside the Internal Circulating Fluidized Bed (ICFB) riser, using different riser exit geometries at several operating conditions.The Radioactive Particle-Tracking (RPT) technique was used for solid concentration measurements and solid residence time distribution at the exit zone. Experiments were conducted using Geldart B particles, in the gas superficial velocity range of 4 to 10 m/s. Axial solid hold-up, solid residence time distribution in the exit zone, and the reflux ratio factor k_m, (defined earlier by [E.H. Van der Meer, R.B. Thorpe, J.F. Davidson, Flow patterns in the square cross-section riser of a circulating fluidized bed and the effect of riser exit design, Chem. Eng. Sc. 55 (19) (2000) 4079-4099]), were the main criteria used to investigate the impact of gas-solid separator devices implemented at the ICFB riser exit.Solid residence time distribution results and axial solid hold-up profiles provided clear evidence that the separator device at the riser exit strongly influences the hydrodynamic structure of the ICFB riser. The V-shaped riser exit geometry was found to be the optimum of all the configurations studied.     

程控电流源无需电源支持

工程实验室通常都配有各种电源设备、伏特计、函数信号发生器和示波器。然而．许多这样的工程实验室却缺少电流源。这令人感到非常遗憾，因为电流源有助于生成I-V（电流对电压）曲线，它能对电池进行充放电操作，对电源设备预加负荷，并可实现许多其他的应用。