世界首颗量子科学实验卫星“墨子号”交付使用

<正>世界首颗量子科学实验卫星"墨子号"在圆满完成4个月的在轨测试任务后,正式交付用户单位使用。"墨子号"是我国自主研制的世界首颗空间量子科学实验卫星,其在轨测试阶段全面完成了卫星平台测试、有效载荷自测试和天地一体化链路测试等工作,     

Optimum truncation of a Gaussian beam for propagation through atmospheric turbulence

The mean on-axis far-field (or focal-plane) irradiance of a Gaussian beam that is truncated by a circular aperture in the presence of atmospheric turbulence is considered. In the absence of turbulence, an accurate analytic approximation for the irradiance distribution that is valid within the main central lobe of the beam is presented. Based on this approximation, the mean on-axis far-field irradiance and the corresponding turbulence Strehl ratio for the truncated Gaussian beam are then obtained. By maximization of the on-axis irradiance, the optimum ratio of the beam diameter to the aperture diameter in the presence of turbulence is obtained, and the results for the corresponding maximum on-axis irradiance as a function of the strength of turbulence are presented. In particular, for D/r(0) > 1, where D is the aperture diameter and r(0) is Fried's coherence length, optimum truncation of a Gaussian beam and uniform illumination of a circular aperture (where the same total power isuniformly distributed over the aperture) result in the same on-axis irradiance in the presence of uncompensated turbulence.     

Laser-speckle angular-displacement sensor: theoretical and experimental study

A novel, to our knowledge, method for the measurement of angular displacement for arbitrarily shaped objects is presented in which the angular displacement is perpendicular to the optical axis. The method is based on Fourier-transforming the scattered field from a single laser beam that illuminates the target. The angular distribution of the light field at the target is linearly mapped on a linear image sensor placed in the Fourier plane. Measuring this displacement facilitates the determination of the angular displacement of the target. It is demonstrated both theoretically and experimentally that the angular-displacement sensor is insensitive to object shape and target distance if the linear image sensor is placed in the Fourier plane. A straightforward procedure for positioning the image sensor in the Fourier plane is presented. Any transverse or longitudinal movement of the target will give rise to partial speckle decorrelation, but it will not affect the angular measurement. Furthermore, any change in the illuminating wavelength will not affect the angular measurements. Theoretically and experimentally it is shown that the method has a resolution of 0.3 mdeg ( approximately 5 murad) for small angular displacements, and methods for further improvement in resolution is discussed. No special surface treatment is required for surfaces giving rise to fully developed speckle. The effect of partially developed speckle is considered both theoretically and experimentally.     

Random-iteration algorithm-based optical parallel architecture for fractal-image decoding by use of iterated-function system codes

An optical parallel architecture for the random-iteration algorithm to decode a fractal image by use of iterated-function system (IFS) codes is proposed. The code value is first converted into transmittance in film or a spatial light modulator in the optical part of the system. With an optical-to-electrical converter, electrical-to-optical converter, and some electronic circuits for addition and delay, we can perform the contractive affine transformation (CAT) denoted in IFS codes. In the proposed decoding architecture all CAT's generate points (image pixels) in parallel, and these points then are joined for display purposes. Therefore the decoding speed is improved greatly compared with existing serial-decoding architectures. In addition, an error and stability analysis that considers nonperfect elements is presented for the proposed optical system. Finally, simulation results are given to validate the proposed architecture.     

Application of rhodamine 800 for reversed phase liquid chromatographic detection using visible diode laser-induced fluorescence

This study reports the application of rhodamine 800, a far-red dye, suitable for excitation using visible diode laser-induced fluorescence (VDLIF) detection. A reagent synthesized from rhodamine 800 was evaluated as a precolumn reagent for derivatization with amino-containing analytes. The derivative of this reagent with primary amine analytes showed a loss of fluorescence. Rhodamine 800 was then applied as a mobile phase additive in the indirect mode for quantitation of valproic acid in plasma using reversed phase HPLC in combination with VDLIF detection. A visible diode laser (output power 8.50 mW) temperature-tuned to oscillate at 674.70 nm was used as a light source for a laboratory constructed HPLC fluorescence detector. A liquid/liquid extraction procedure was applied to human blank plasma. The selectivity of this method was validated by demonstration of a lack of interfering peaks in extracts of plasma (n = 3 sources). A calibration curve for valproic acid between 40 and 200 μg/mL was shown to be linear (r = 0.9932). The recoveries of valproic acid at concentrations of 50 and 100 μg/mL were evaluated and determined to be 73 and 72%, respectively. The precision and accuracy (n = 5) of the assay was within 7.0% RSD and 8.0% difference from the spiked concentration, respectively. The limits of detection (S/N = 3) for extracted and unextracted valproic acid were 15.0 and 11.54 μg/mL, respectively. The theoretical (C(lim)) and practical (C(det)) limits of detection in the detector flow cell for unextracted valproic acid at a S/N = 1 were found to be within 15%.     

Granularity in ion-beam-sputtered TiO(2) films

TiO(2)-SiO(2) multilayer dielectric stacks that were deposited by ion-beam sputtering were found to have a granular structure. The grains were in the TiO(2) layers rather than in the SiO(2) layers. Their formation was due to the heating of the film during deposition. When the apparatus was modified to reduce the substrate temperature, the granularity was eliminated.     

Motion regularization for matting motion blurred objects

This paper addresses the problem of matting motion blurred objects from a single image. Existing single image matting methods are designed to extract static objects that have fractional pixel occupancy. This arises because the physical scene object has a finer resolution than the discrete image pixel and therefore only occupies a fraction of the pixel. For a motion blurred object, however, fractional pixel occupancy is attributed to the object’s motion over the exposure period. While conventional matting techniques can be used to matte motion blurred objects, they are not formulated in a manner that considers the object’s motion and tend to work only when the object is on a homogeneous background. We show how to obtain better alpha mattes by introducing a regularization term in the matting formulation to account for the object’s motion. In addition, we outline a method for estimating local object motion based on local gradient statistics from the original image. For the sake of completeness, we also discuss how user markup can be used to denote the local direction in lieu of motion estimation. Improvements to alpha mattes computed with our regularization are demonstrated on a variety of examples.     

RFID-initiated workflow control to facilitate patient safety and utilization efficiency in operation theater

Objective

To control the workflow for surgical patients, we in-cooperate radio-frequency identification (RFID) technology to develop a Patient Advancement Monitoring System (PAMS) in operation theater.

Methods

The web-based PAMS is designed to monitor the whole workflow for the handling of surgical patients. The system integrates multiple data entry ports Across the multi-functional surgical teams. Data are entered into the system through RFID, bar code, palm digital assistance (PDA), ultra-mobile personal computer (UMPC), or traditional keyboard at designated checkpoints. Active radio-frequency identification (RFID) tag can initiate data demonstration on the computer screens upon a patient's arrival at any particular checkpoint along the advancement pathway.

Results

The PAMS can manage the progress of operations, patient localization, identity verification, and peri-operative care. The workflow monitoring provides caregivers’ instant information sharing to enhance management efficiency.

Conclusion

RFID-initiate surgical workflow control is valuable to meet the safety, quality, efficiency requirements in operation theater.     

Lighting level and productivity: a field study in the electronics industry

The effect of illuminance on the speed and the quality (percentage of errors) with which workers assemble electronic devices was studied in an electronics factory in The Netherlands. For the study, the horizontal illuminance was alternated per work shift between 800 and 1200 lux. The first test was done during the summer and a second test during the winter. A significant effect of illuminance has been found. With 1200 lux at the working plane, the speed of production in the summer was 2.9% higher than with 800 lux. In the winter it was 3.1% higher with the increased illuminance. There was no significant effect of the illuminance on the percentage of errors.