A multilayer recognition model for twitter user geolocation

Wireless Networks - Geolocation is important for many emerging applications such as disaster management and recommendation system. In this paper, we propose a multilayer recognition model (MRM) to...     

A study of the local site effects on the ground response for the city of Eskişehir,Turkey

Bulletin of Engineering Geology and the Environment - Local soil characteristics play a key role in determining soil-structure interaction and reliability of the superstructure behavior under...     

磷钨酸乙醇染色法在嗜铬颗粒电镜X射线显微分析中的应用

通过比较常规透射电镜制样法、快速冷冻固定－冷冻超薄切片法及磷钨酸乙醇（EPTA）染色法在嗜铬颗粒透射电镜X射线显微分析中的应用，发现磷钨酸乙醇染色法能使嗜铬颗粒电子着色，从而较好地显示嗜铬颗粒的超微结构。同时磷钨酸乙醇染色法也以在一定程度上原位保留生物样品中元素，可以应用于检测样品元素含量的变化或比较样品元素含量的组间差别，提示磷钨酸乙醇染色法是一种可应用于透射电镜X射线显微分析的经济简便的生物样品制备方法。     

一种制备磁性粉末的新技术--均匀颗粒成型法

采用均匀颗粒成型法（Uniform Dropler Spray-UDS）制备Fe基合金粉末，该方法制备的颗粒粒度分布均匀，性能一致，大大优于传统的粉末制备方法（如破碎法、气雾化），具有广阔的应用前景。本文分析了粉末制备过程中颗粒尺寸的影响因素，结果表明：颗粒的大小主要取决于坩埚底部小孔、坩埚内外气体压强差以及振荡频率三个独立变量。     

Topical use of aprotinin in open heart operations

Among various pharmacological agents used to reduce bleeding after open-heart operations, high-dose aprotinin therapy seems most promising. However, its long-term effects are still obscure; there is almost always possibility of bypass graft occlusions produced by the hypercoagulable state induced by aprotinin in coronary bypass operations. Topical application of aprotinin into the pericardial cavity could prevent the adverse effects. Fifty patients were prospectively studied to evaluate the effects of topical aprotinin. One million KIU of aprotinin was poured into the pericardial cavity before closure of the sternotomy in group 1 (n = 25). Patients in group 2 (n = 25) served as controls. Total postoperative bleeding was significantly reduced in group 1 when compared with that of group 2 (722.7 +/- 230.8 versus 1,282.6 +/- 225.7 mL; p < 0.01). The use of banked donor blood products was significantly less in group 1 than in group 2 (0.33 +/- 0.67 versus 1.36 +/- 0.86 units; p < 0.01). These results show that topical use of aprotinin reduces post-operative blood loss and need for transfusion. It seems promising and warrants further studies to be done.     

管式气体分散式反应器制备纳米碳酸钙

以石灰石为原料，利用管式气体分散式反应器新工艺制备出了粒径30～70nm的碳酸钙粉体。采用X射线衍射（XRD）、扫描电镜（SEM）、粒度分布仪及红外光谱仪（Fr-IR）等测试手段，对产品的物相、形貌和粒度分布进行了表征。X射线衍射表明产物为六方晶系方解石型碳酸钙并且产品结晶性能良好；扫描电镜及粒度分析表明粒度大小均匀、分散性良好；红外光谱表明改性后硬脂酸钠已吸附在碳酸钙表面，碳酸钙颗粒基本呈单分散状态。管式气体分散式反应器制备纳米碳酸钙粉体的优点是工艺简单，操作容易，原料易得，生产的产品粒径小，粒度分布窄，易于工业化生产。     

Effect of H2O adsorption on the electrical transport properties of double-walled carbon nanotubes

Water molecules adsorbed on a double-walled carbon nanotube (DWCNT) serve as charge trapping centers when present in low density and as electron donors when present in high density. There is a discontinuous change between the low- and high-density regions. H₂O molecules are apt to be adsorbed on the outer surface of DWCNTs, and in this case the electrical transport properties are extremely sensitive to environment, which suggests that DWCNTs are hole doped and act as an electric dipole with the inner tube.     

琥珀酰亚胺酯基类偶氮染料的制备及其超临界CO2羊毛清洁化染色

以对氨基苯甲酸和4-氨基-2-氯苯甲酸、苯胺和间甲苯胺为原料,采用重氮偶合反应制备染料前驱体,通过在前驱体上引入琥珀酰亚胺酯获得4例活性分散染料Ⅰ～Ⅳ.对染料的紫外-可见吸收光谱、光热稳定性、超临界二氧化碳(scCO2)中羊毛纤维的染色工艺等进行了测试.结果表明,4例染料均具有良好的光热稳定性,染料Ⅰ、Ⅲ和Ⅳ最大吸收波长集中在360～370 nm,染料Ⅱ的最大吸收波长红移到379～452 nm,染料均具备scCO2染色的条件.染料Ⅰ和Ⅲ的最佳染色条件为2 h、80℃和15 MPa,染料Ⅱ的最佳染色条件为1.5 h、80℃和15 MPa,染料Ⅳ的最佳染色条件为2 h、80℃和24 MPa.染色后的羊毛纤维的耐皂洗和耐光色牢度都可达4～5级,固色率最高可达86％,相比于未活化的前驱体,耐皂洗色牢度能提高2～3级,固色率最高能提升63％.SEM和显微镜成像证明4例染料具有良好的透染性,且能均匀附着于纤维的表面和内部.力学性能测试表明,染色后的羊毛纤维能基本保持原有的力学性能.     

机械球磨Al-10%Ti粉末的组织和热稳定性

研究了机械球磨方法制备的Al-10%Ti混合粉末的组织和热稳定性.结果表明:在球磨作用下,Al, Ti粉末的颗粒尺寸得到有效细化,并且球磨时间越长,Al/Ti粉末储备能量越大,生成Al-Ti金属间化合物所需的反应激活能越低,内能的增加和扩散能力的提高是由于机械球磨导致了大量的晶格缺陷;Al-10%Ti混合粉末反应烧结后相互扩散形成的最终产物是DO22-Al3Ti.     

Q-52-51型摩托车车轮轮毂开裂原因分析

检测和分析了Q-52-51型摩托车车轮轮毂从材料成分，力学性能和金相组织。结果表明，轮毂在径向冲击检测时开裂的主要原因是镁含量偏高，以及热处理加热温度高造成组织过热所致。