Enhancement of glass-ceramic performance by TiO2 doping: In vitro cell viability,proliferation, and differentiation

A new TiO₂-containing bioactive glass and glass-ceramics based on 50SiO₂-(45-X)CaO-(XTiO₂)-5P₂O₅ system was designed using a sol–gel technique (where X = 5, 7.5 and 10 wt %). The roles of the crystallization behavior and physicochemical characteristics of the designed glass and glass-ceramics which were played in the introduction of TiO₂ substitutions were investigated. Moreover, cell proliferation and differentiation were evaluated against human osteosarcoma cells (Saos-2). The TiO₂/CaO replacements led to the formation of a stronger glass structure and thus increased thermal parameters and the chemical stabilization of the designed materials. The FTIR data confirmed the existence of Ti within the glass and glass-ceramics samples, and no remarkable effect on their chemical integrity was observed. The XRD patterns indicated that calcium-containing minerals, including Ca₂SiO₄,Ca₃(PO₄)₂, Ca(Ti,Si)O₅, CaTiSiO₅, and Ca₁₅(PO₄)₂·(SiO₄)₆ phases were developed as a role of structure/texture under the applied heat-treatment. The results of the cytotoxicity test proved that a safe sample dose is 12–50 μg/ml, at which cell viability is ≥ 85%. The cell differentiation determined by ALP test proved the superiority of glass-ceramics compared with their native glasses. Therefore, the obtained materials could be safely used as novel biocompatible materials for the regeneration of bone tissue.     

Cryptococcosis in tree shrews (Tupaia tana and Tupaia minor) and elephant shrews (Macroscelides proboscides)

OBJECTIVE: To determine the relation between metabolic and anthropometric parameters and circulating leptin concentrations in women with polycystic ovary syndrome (PCOS). DESIGN AND PATIENTS: Correlation of fasting serum leptin concentrations with anthropometric measures and multiple metabolic parameters including insulin and glucose responses to a 2-hour 75-g oral glucose tolerance test (OGTT) in 85 women with PCOS (17-36 years, body mass index (BMI) 29.9 +/- 0.9 kg/m2, mean +/- SD) and 18 control women (25-47 years, BMI 25 +/- 1.7 kg/m2). Diagnostic criteria for PCOS: characteristic ovarian morphology on ultrasound plus at least two of (1) elevated serum testosterone; (2) elevated serum androstenedione; and (3) reduced serum SHBG concentrations. MEASUREMENTS: Concentrations of androgens, lipids, PRL, gonadotrophins, and leptin were measured in the baseline fasting blood sample from an OGTT. Insulin and glucose were measured throughout OGTT. Serum leptin concentrations were measured by radioimmunoassay. RESULTS: Log leptin levels in the PCOS group correlated significantly with BMI (r = 0.85, P < 0.0001) and with 8 other parameters including waist/hip ratio (r = 0.51, P = 0.0005). By stepwise regression analysis, only BMI (P < 0.0001) and plasma high density lipoprotein concentration (P = 0.02) were independently correlated with log leptin levels, both positively. There was no effect of fat distribution, as measured by waist/ hip ratio, on leptin concentrations. Comparison of control subjects to a BMI-matched subgroup of 55 PCOS subjects revealed significantly higher circulating concentrations of LH, testosterone, DHEAS, progesterone and androstenedione, and higher glucose and insulin responses to OGTT in the PCOS group. Leptin levels were not different between the PCOS subgroup and control group (14.8 +/- 1.3 vs 12.1 +/- 2.3 micrograms/l, mean +/- SE, P = 0.26) and the relation of BMI to leptin levels determined by linear regression analysis also did not differ between the two groups. CONCLUSIONS: Our results indicate that circulating leptin concentrations in women with PCOS, a condition characterized by hyperandrogenaemia, increased LH concentrations and insulin resistance, are strongly related to BMI and not independently affected by circulating levels of insulin, gonadotrophins or sex hormones.     

2 cm long monolithic multisection laser for active modelocking at 2.2 GHz

A 2 cm long three-contact multisection laser has been fabricated for modelocking at very low repetition rates. Active modelocking yields 8.0-12.3 ps pulses at 2.2, 4.3 and 6.5 GHz corresponding to the fundamental, first, and second harmonics of the cavity resonance frequency. This device demonstrates the feasibility of fabricating monolithic pulse sources operating at rates as low as the OC-48 Sonet transmission rate (2.488 Gbit/s).<>     

An adaptive region segmentation combining surrogate model applied to correlate design variables and performance parameters in a transonic axial compressor

Surrogate models have been widely applied to correlate design variables and performance parameters in turbomachinery optimization applications. With more design variables and uncertain factors taken into account in an optimization design problem, the mathematical relations between the design variables and the performance parameters might present linear, low-order nonlinear or even high-order nonlinear characteristics, and are usually analytically unknown. Therefore, it is required that surrogate models have high adaptability and prediction accuracy for both the linear and nonlinear characteristics. The paper mainly investigates the effectiveness of an adaptive region segmentation combining surrogate model based on support vector regression and kriging model applied to a transonic axial compressor to approximate the complicated relationships between geometrical variables and objective performance outputs with different sampling methods and sizes. The purpose is to explore the prediction accuracy and computational efficiency of this adaptive surrogate model in real turbomachinery applications. Three different sampling techniques are studied: (1) uniform design; (2) Latin hypercube sampling method; (3) Sobol quasi-random design. For the low dimensional case with five variables, the adaptive region segmentation combining surrogate model performs better (not worse) than the single component surrogate in terms of prediction accuracy and computational efficiency. In the meanwhile, it is also noted that the uniform design applied to the adaptive surrogate model has more advantages over the Latin hypercube sampling method especially for the small sample size cases, both performing better than the Sobol quasi-random design. Moreover, a high dimensional case with 12 variables is also utilized to further validate the prediction advantage of the adaptive region segmentation combining surrogate model over the single component surrogate, and the computational results favor it. Overall, the adaptive region segmentation combining surrogate model has produced acceptable to high prediction accuracy in presenting complex relationships between the geometrical variables and the objective performance outputs and performed robustly for a transonic axial compressor problem.

     

Impact of graphene oxide nanoparticles and carbon black on the gamma radiation sensitization of acrylonitrile–butadiene rubber seal materials

Seals prepared from acrylonitrile–butadiene rubber (NBR) are primarily used in nuclear services. Nevertheless, at relatively high ionizing radiation doses, NBR seal materials may undergo radiation-induced degradation processes, leading to adverse effects on the sealing ability life. Herein, to strengthen the functional characteristics of NBR seals against radiation, graphene oxide (GO) nanoparticles were prepared and characterized by transmission electron microscopy, X-ray diffraction (XRD), Fourier transform infrared (FTIR), and ultraviolet/visible spectroscopies. Various NBR/GO composites fabricated with different ratios of GO nanoparticles and in the presence or absence of carbon black (CB) were investigated via cross-linking density, scanning electron microscopy, XRD, FTIR, and mechanical and thermal stability analyses. The synergistic effect of the simultaneous presence of GO and CB on the NBR seal sensitization to gamma radiation up to a dose of 1 MGy was studied. The physicomechanical properties were enhanced by adding GO nanosheets up to 3 phr and by incorporating 35 phr of a CB with GO until 5 phr. Further, the application of γ-irradiation resulted in an overall enhancement in the mechanical, physical, and thermal stability of the prepared composites up to 0.5 and 1 MGy with GO nanosheets in the absence or presence of CB particles, respectively. The mechanical measurements indicated significant increments by loading with GO nanosheets in the absence and presence of CB as well as by irradiation. The tensile strength elevated up to about 121%, 336%, and 366% by adding 3 phr GO, 3 GO:35 CB phr, and 5 GO:35 CB phr, respectively.     

Open to a Select Few? Matching Partners and Knowledge Content for Open Innovation Performance

The purpose of the paper is to illuminate the costs and benefits of crossing firm boundaries in inbound open innovation (OI) by determining the relationships among partner types, knowledge content and performance. The empirical part of the study is based on a survey of OI collaborations answered by R&D managers in 415 Italian, Finnish and Swedish firms. The results show that the depth of collaboration with different partners (academic/consultants, value chain partners, competitors and firms in other industries) is positively related to innovation performance, whereas the number of different partners and size have negative effects. The main result is that the knowledge content of the collaboration moderates the performance outcomes and the negative impact of having too many different kinds of partners. This illustrates how successful firms use selective collaboration strategies characterized by linking explorative and exploitative knowledge content to specific partners, to leverage the benefits and limit the costs of knowledge boundary crossing processes.     

Different Estimation Methods for Constant Stress Accelerated Life Test under the Family of the Exponentiated Distributions

The Accelerated Life Testing (ALT) has been used for a long time in several fields to obtain information on the reliability of product components and materials under operating conditions in a much shorter time. One of the main purposes of applying ALT is to estimate the failure time functions and reliability performance under normal conditions. This paper concentrates on the estimation procedures under ALT and how to select the best estimation method that gives accurate estimates for the reliability function. For this purpose, different estimation methods are used, such as maximum likelihood, least squares (LS), weighted LS, and probability weighted moment. Moreover, the reliability function under usual conditions is predicted. The estimation procedures are applied under the family of the exponentiated distributions in general, and for the exponentiated inverted Weibull (EIW) as a special case. Numerical analysis including simulated data and a real life data set is conducted to compare the performances between these four methods. It is found that the ML method gives the best results among other estimation methods. Finally, a comparison between the EIW and the Inverted Weibull (IW) distributions based on a real life data set is made using a likelihood ratio test. It is observed that the EIW distribution can provide better fitting than the IW in case of ALT. Copyright © 2015 John Wiley & Sons, Ltd.     

Online scheduling with rejection and withdrawal

We study an online scheduling problem with rejection, in which some rearrangement of the solution is allowed. This problem is called scheduling with rejection and withdrawal. Each arriving job has a processing time and a rejection cost associated with it, and it needs to be either assigned to a machine or rejected upon arrival. At termination, it is possible to choose at most a fixed number of scheduled jobs and withdraw them (i.e., decide to reject them). We study the minimization version, where the goal is to minimize the sum of the makespan and the total rejection cost (which corresponds to the penalty), and the maximization problem, where the goal is to maximize the sum of the minimum load and the total rejection cost (which corresponds to profit). We study environments of machines, which are the case of m identical machines and the case of two uniformly related machines, and show a strong relation between these problems and the related classic online scheduling problems which they generalize, in contrast to standard scheduling with rejection, which typically makes the scheduling problems harder.     

Configuration Maintenance for Distributed Applications Management

The MANDAS project has defined a layered architecture for the management of distributed applications. In this paper we examine a vertical slice of this architecture, namely the management applications and services related to configuration management. We introduce an information model which captures the configuration information for distributed applications and discuss a repository service based on the model. We define a set of services and management applications to support maintenance of configuration information, and describe how the different types of configuration information are collected. Finally, we present two management applications that use configuration information.