1H T2‐NMR monitoring of crosslinked polyolefin aging

This work examines the correlation between the ¹H‐NMR T₂ relaxation constant and the mechanical properties of aged crosslinked polyolefin cable insulation. T₂ experiments on unswollen samples could not differentiate between unaged and highly aged materials; all exhibited ¹H T₂ constants of approximately 0.5 ms. To accentuate the effects of aging, samples were swollen in various solvents. Unaged samples had T₂ values of approximately 15 ms in good solvents. With thermal aging, T₂ values decreased as the ultimate tensile elongation decreased. However, the correlation between T₂ and elongation differed for samples irradiated with high‐energy radiation and for materials aged above versus below the crystalline melting temperature. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2578–2582, 2003     

PdO/Pd system equilibrium phase diagram under a gas mixture of oxygen and nitrogen

The thermal equilibrium decomposition properties of the PdO-Pd system under oxygen partial pressures ranging from 0.1 to 1.0 atm in a total combined pressure of oxygen and nitrogen of 1.0 atm were investigated by means of thermal-gravimetric analyses. The phase diagram of Pd-PdO over the range of oxygen/nitrogen gas concentration was established. The decomposition temperature of PdO to Pd was found to increase with the partial pressure of oxygen.     

Sacrospinous colpopexy in the management of uterovaginal prolapse

The tet(M) genes were characterized from 84 isolates of 10 different bacterial species isolated from the periodontal pockets of 16 patients with periodontal disease. A 740 bp polymerase chain reaction product from the hypervariable region of the tet(M) structural gene was cleaved with the restriction enzymes AluI and HinfI. Three different restriction patterns were identified for each of the two enzymes. By DNA sequencing, using a direct solid-phase automated sequencing method, the isolates could be grouped into 3 different clusters of tet(M) subtypes. The internal DNA homology within each subtype was 98-100%; the homology between clusters was 89-94%. Two different subtypes were identified in 9 of 10 bacterial species, and the remaining species had 3 different subtypes. One of the subtypes (M3) was seen mainly in the anaerobic isolates. This subtype was different from all earlier sequenced structural tet(M) genes present in the Genbank. Most patients had two different subtypes of tet(M), and a third subtype was seen in the 3 patients who exhibited the greatest variety of tetracycline-resistant bacterial species. It appears that the presence of one subtype of the tet(M) gene within a patient or bacterial species does not prevent the acquisition of another subtype of the same gene. This study identified a new subtype of the tet(M) gene and grouped it into 3 distinct yet highly homologous genetic subtypes.     

Live animal performance, carcass traits, and meat palatability of calf- and yearling-fed cloned steers

Two groups of Brangus steers produced by nuclear transplantation cloning were used in parallel studies investigating the impact of calf- and yearling-feeding. The first group (n = 8) were fed as calves (CF; n = 4) or yearlings (YF; n = 4) to a constant age end point of 16 mo. The second group (n = 10) were fed as calves (CF; n = 5) or yearlings (YF; n = 5) to a constant live weight end point (530 kg). When slaughtered at the same age, CF and YF steers did not differ (P > .05) in feedlot ADG, but the CF steers were heavier and had higher dressing percentages, numeric yield grades, and quality grades (P < .05). Top loin steaks from the groups of steers did not differ (P > .05) in palatability traits. When fed to a constant live weight, the YF steers gained more rapidly (P < .05) and had lower (P < .05) numeric yield grades than did CF steers. Again CF steers had higher (P < .05) dressing percentages. There was no difference (P > .05) between the treatments in carcass quality grade or meat palatability characteristics. Thus, when finished to a constant weight end point, YF steers gained more rapidly, with no adverse effects on carcass quality grade or palatability traits; however, CF steers consistently produced higher dressing percentages, largely due to greater external fatness.     

EEG spectral abnormalities and psychosis as predictors of cognitive and functional decline in probable Alzheimer's disease

We examined whether either psychotic features (e.g., delusions and hallucinations) or EEG abnormalities are associated with more rapid progression of Alzheimer's disease (AD). AD patients with psychosis have exhibited more EEG abnormalities than those without psychosis, and both abnormal EEG and psychosis have been noted to be predictors of functional and cognitive decline in AD. Ninety-five probable AD patients participating in a longitudinal study of dementia had an EEG and a semistructured psychiatric interview at baseline. Using EEG spectral analysis, we classified records as normal/abnormal based on the parasagittal mean frequency. Patients with abnormal EEGs were more functionally (e.g., Blessed Rating Scale for activities of daily living) and cognitively (e.g., Mini-Mental State) impaired than patients with normal EEG. AD patients with psychosis were only more functionally impaired than patients without psychosis. A two-factor analysis showed no interaction between abnormal EEG and psychosis. In addition, using a Cox proportional hazard model adjusted for age and education, the presence of an abnormal EEG or psychotic symptom at study entry was associated with higher risk of reaching severe cognitive and functional impairment during follow-up. Neither abnormal EEG nor the presence of psychosis predicted death. These results indicate that both abnormal EEG and psychosis are independent predictors of disease progression but not of physical survival.     

Flotation machine design: impeller—stator interaction

The separate contributions of impellers and stators to suction are studied by means of interaction models. From these, suction can be predicted when interchangeable components are used in any combination, and in either direction of impeller rotation. Methods are devised by which numerical values of the impeller and stator terms can be simply assigned. The resulting model provides good agreement with experiment. The influence of variability in component geometry is reflected in the model parameters. Possible applications of the model are suggested.