Trace elements in human transitory milk. Variation caused by biological attributes of mother and infant

Multielement analysis was performed on human milk collected on 5-9-d postpartum from 51 Japanese females using inductively coupled plasma (ICP) mass spectrometry (MS), ICP atomic emission spectrometry (ICP-AES) and fluorometry. Thirty-one elements were detected by these analytical methods in milk. Twelve elements (Na, Mg, P, S, K, Ca, Cu, Zn, Se, Sr, Rb, and Mo) were detected in all of the samples. Al, Cs, and Ba were the elements detected by ICP-MS in more than half of the samples. Multiple regression analysis extracted biological attributes of mother and infant, such as maternal stature, maternal wt, or infant's birth wt, as statistically significant factors contributing to the variation in elemental concentration in milk. However, the rates of contribution were small in all cases. It was concluded that the biological attributes of mother and infant examined in this study were not the major factors that contribute to elemental variation in human milk.     

In situ TEM study on changes in structure and electrical conductance of carbon nanotube-gold contact induced by local joule heating

Electrical conductance of multi-walled carbon nanotubes (MWCNTs) with closed and open tips contacting with a gold (Au) electrode was studied by in situ transmission electron microscopy. When a current density through the contact region reached a threshold value of 2.6 × 10⁸ A/cm², the MWCNT tip was embedded into the Au surface by local melting of Au, and the total resistance was reduced with the increase of the contact area. Conductance per unit area at the contact between the MWCNT and Au electrode for the open-ended MWCNT is four times larger than that for the close-ended one, which is due to the direct connection of inner walls of the open-ended MWCNT with the Au surface.     

Molecular Design and Synthesis of a Novel Substrate for Assaying Lysozyme Activity

A novel substrate {Galβ1,4GlcNAcβ1,4GlcNAc-β-pNP [Gal(GlcNAc)₂-β-pNP]} for assaying lysozyme activity has been designed using docking simulations and enzymatic synthesis via β-1,4-galactosyltransferase-mediated transglycosylation from UDP-Gal as the donor to (GlcNAc)₂-β-pNP as the acceptor. Hydrolysis of the synthesized Gal(GlcNAc)₂-β-pNP and related compounds using hen egg-white lysozyme (HEWL) demonstrated that the substrate was specifically cleaved to Gal(GlcNAc)₂ and p-nitrophenol (pNP). A combination of kinetic studies and docking simulation was further conducted to elucidate the mode of substrate binding. The results demonstrate that Gal(GlcNAc)₂-β-pNP selectively binds to a subsite of lysozyme to liberate the Gal(GlcNAc)₂ and pNP products. The work therefore describes a new colorimetric method for quantifying lysozyme on the basis of the determination of pNP liberated from the substrate.     

Bioconversion of 1-adamantanol to 1,3-adamantanediol using Streptomyces sp. SA8 oxidation system

To efficiently produce 1,3-adamantanediol (1,3-ad(OH)₂) from 1-adamantanol (1-adOH), our stocks of culture strains and soil microorganisms were surveyed for hydroxylation activity towards 1-adOH. Among them, the soil actinomycete SA8 showing the highest hydroxylation activity was identified as Streptomyces sp. based on 16S ribosomal DNA sequence analysis. The reaction products were purified by silica gel column chromatography, and from NMR and MS analyses, they were identified as 1,3-ad(OH)₂ and 1,4-ad(OH)₂. Streptomyces sp. SA8 produced 5.9 g l^? 1 1,3-ad(OH)₂from 6.2 g l^? 1 1-adOH in culture broth after 120 h at 25 °C. Using resting cells, 2.3 g l^? 1 1,3-ad(OH)₂ was produced after 96 h of incubation at a 69% conversion rate. In both cases, 1,4-ad(OH)₂ was formed as a byproduct at a rate of about 15%. Strain SA8 also hydroxylated 2-adamantanol and 2-methyl-2-adamantanol.     

Synergistic effect of Pt or Pd and perovskite oxide for water gas shift reaction

The water gas shift (WGS) reaction over Pt and Pd catalysts supported on various perovskite oxides has been investigated at 573 K without catalyst pretreatment. The Pt and Pd catalysts on LaCoO₃ support showed high catalytic activity. Interaction between Pt or Pd and the support is considered to promote the WGS reaction: Pt/LaCoO₃ had high initial activity but deactivated immediately; Pd/LaCoO₃ was less active than Pt/LaCoO₃, but had superior stability. Catalysts were characterized using XRD, STEM, XPS, and H₂-temperature programmed reduction (TPR). Results of this study showed that reduction of the support decreased the CO conversion on Pt/LaCoO₃. On the other hand, Pd/LaCoO₃ showed stable activity for the WGS reaction. Therefore, Pd was added to Pt/LaCoO₃ for stabilizing the catalyst activity, and 0.5 wt.% Pd/1 wt.% Pt/LaCoO₃ catalyst showed higher activity and stability.     

Purification and some properties of a chitinase from Xanthomonas sp. strain AK

Chitinase B (ChiB) was purified from the culture supernatant of Xanthomonas sp. strain AK by Phenyl-Toyopearl 650M and DEAE-Toyopearl 650M column chromatographies. The purified enzyme preparation gave a single band on SDS-polyacrylamide gel electrophoresis and the molecular weight of ChiB was estimated to be 48,000. The enzyme was optimally active at pH 6.0 and 60 degrees C. N-Terminal amino acid sequence analysis suggested that ChiB is a member of glycosyl hydrolase family 18 and that it is genetically different from ChiA recently reported (Sakka et al., J. Ferment. Bioeng., 86, 527-533, 1998). Immunological analysis suggested that ChiB was the major chitinase species in the culture supernatant of Xanthomonas sp. strain AK and that production of the enzyme was induced by the presence of chitin.     

Preparation of carbon microparticle assemblies from phenolic resin using an inverse opal templating method

Three-dimensionally (3D) well-ordered carbon microparticle assemblies with different particle morphologies were fabricated by infiltration of phenolic resin solution into SiO₂ inverse opal structures and subsequent carbonization. The effect of the phenolic resin solution concentration and the carbonization temperature on the morphology of the fabricated carbon microparticles was investigated. At a carbonization temperature of 1000 °C, carbon microparticles with interlocked bridges were obtained when the concentration of phenolic resin solution is 40 wt% and hollow carbon microparticles with opened window channels were obtained at a concentration of 30–35 wt%. When the carbonization temperature was decreased to 500 °C, carbon microparticles with interlocked bridges also were observed, even when the phenolic resin concentration was 30 wt%. The structures and properties of the carbon microparticles and their assemblies were characterized using SEM, XRD, and N₂ adsorption.     

Nonsalt 1‐(arylmethyloxy)pyrene photoinitiators capable of initiating cationic polymerization

Analysis of photoproducts derived from 1‐(methoxynaphthalen‐1‐ylmethyloxy)pyrene initiators and polymer end groups demonstrated that methoxynaphthalen‐1‐ylmethyl carbocation is involved in the initiation steps for both styrene (St) and cyclohexene oxide (CHO) polymerization. Charge transfer from the pyrenyloxy oxygen atom to the methoxynaphthalen‐1‐ylmethyl chromophore in the singlet excited state is assumed to be responsible for the efficient generation of the carbocation species, which also initiates the copolymerization of St and CHO. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40510.