Review on zirconate-cerate-based electrolytes for proton-conducting solid oxide fuel cell

The performance of low-to-intermediate temperature (400–800?°C) solid oxide fuel cells (SOFCs) depends on the properties of electrolyte used. SOFC performance can be enhanced by replacing electrolyte materials from conventional oxide ion (O^2-) conductors with proton (H⁺) conductors because H⁺ conductors have higher ionic conductivity and theoretical electrical efficiency than O^2- conductors within the target temperature range. Electrolytes based on cerate and/or zirconate have been proposed as potential H⁺ conductors. Cerate-based electrolytes have the highest H⁺ conductivity, but they are chemically and thermally unstable during redox cycles, whereas zirconate-based electrolytes exhibit the opposite properties. Thus, tailoring the properties of cerate and/or zirconate electrolytes by doping with rare-earth metals has become a main concern for many researchers to further improve the ionic conductivity and stability of electrolytes. This article provides an overview on the properties of four types of cerate and/or zirconate electrolytes including cerate-based, zirconate-based, single-doped cerate–zirconate and hybrid-doped cerate–zirconate. The properties of the proton electrolytes such as ionic conductivity, chemical stability and sinterability are also systematically discussed. This review further provides a summary of the performance of SOFCs operated with cerate and/or zirconate proton conductors and the actual potential of these materials as alternative electrolytes for proton-conducting SOFC application.     

Stabilization of 6H-Hexagonal SrMnO3 Polymorph by Al2O3 insertion

We demonstrate the structural evolution of polymorphic phases in Al₂O₃-inserted SrMnO₃ ceramics synthesized by solid state reaction. While the 4H-hexagonal phase is predominant in pure SrMnO₃ ceramics, a small amount of 6H-hexagonal polymorph is identified in addition to the primary 4H-hexagonal SrMnO₃ and the secondary hexagonal SrAl₂O₄ phases in the as-sintered ceramics, evidenced by x-ray diffraction and subsequent Rietveld refinement analyses. The existence of the 6H-hexagonal SrMnO₃ phase is corroborated using Raman spectroscopy. The chemical compositions and electronic structures of the Al₂O₃-inserted SrMnO₃ compounds are also examined using energy dispersive spectroscopy and x-ray photoelectron spectroscopy, respectively. The first-principles calculations reveal that there is no clear difference between the total energies of 4H- and 6H-hexagonal polymorphs regardless of the presence/absence of Sr and oxygen vacancies. Possible origins are discussed with the estimation of actual strain based on the refined lattice parameter of 6H SrMnO₃.     

A new deep convolutional neural network model for classifying breast cancer histopathological images and the hyperparameter optimisation of the proposed model

The Journal of Supercomputing - Deep learning algorithms have yielded remarkable results in medical diagnosis and image analysis, besides their contribution to improvements in a number of fields...     

Material state remapping in computational solid mechanics

A computational procedure for remapping material state information from one finite element mesh to another is described. The procedure is useful in connection with evolving meshes for inelastic problems, as for example occur in the context of fracture simulation and adaptive mesh refinement. The proposed method is based on weak enforcement of equality between corresponding fields on the two meshes, where piecewise‐constant fields on both meshes are generalized from the quadrature‐point values. The essential algorithmic problem is that of calculating the volume partition of an arbitrary convex region with respect to a covering set of disjoint convex regions. Instead of geometrically resolving the associated intersections, the problem is herein approximated by a constrained optimization problem, which may be readily and efficiently solved computationally. This formulation is a main contribution of the paper. Computational examples are given that illustrate the effectiveness of the proposed procedure. Copyright © 2002 John Wiley & Sons, Ltd.     

On colloid-chemical properties of some polymer composites

The influence of the vibrowave action on the properties of some disperse systems used in the textile industry has been considered. It has been noted that excitation of nonlinear oscillation in the audio band under resonant conditions leads to an increase in the degree of dispersion of distributed systems and an increase in their colloid stability. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 79, No. 1, pp. 133–138, January–February, 2006.     

Smart home security: challenges,issues and solutions at different IoT layers

The Journal of Supercomputing - The Internet of Things is a rapidly evolving technology in which interconnected computing devices and sensors share data over the network to decipher different...     

Uncertainty modeling and robust minimax LQR control of multivariable nonlinear systems with application to hypersonic flight

For a class of multi‐input and multi‐output nonlinear uncertainty systems, a novel approach to design a nonlinear controller using minimax linear quadratic regulator (LQR) control is proposed. The proposed method combines a feedback linearization method with the robust minimax LQR approach in the presence of time‐varying uncertain parameters. The uncertainties, which are assumed to satisfy a certain integral quadratic constraint condition, do not necessarily satisfy a generalized matching condition. The procedure consists of feedback linearization of the nominal model and linearization of the remaining nonlinear uncertain terms with respect to each individual uncertainty at a local operating point. This two‐stage linearization process, followed by a robust minimax LQR control design, provides a robustly stable closed loop system. To demonstrate the effectiveness of the proposed approach, an application study is provided for a flight control problem of an air‐breathing hypersonic flight vehicle (AHFV), where the outputs to be controlled are the longitudinal velocity and altitude, and the control variables are the throttle setting and elevator deflection. The proposed method is used to derive a linearized uncertainty model for the longitudinal motion dynamics of the AHFV first, and then a robust minimax LQR controller is designed, which is based on this uncertainty model. The controller is synthesized considering seven uncertain aerodynamic and inertial parameters. The stability and performance of the synthesized controller is evaluated numerically via single scenario simulations for particular cruise conditions as well as a Monte‐Carlo type simulation based on numerous cases. It is observed that the control scheme proposed in this paper performs better, especially from the aspect of robustness to large ranges of uncertainties, than some controller design schemes previously published in the literature. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Sex pheromones of male yellowfin Baikal sculpin (Cottocomephorus grewingki): Isolation and chemical studies

Three components of the male yellowfin Baikal sculpin pheromonal signal have been isolated from urine by diethyl ether extraction, thinayer chromatography (TLC), and high-performance liquid chromatography (HPLC). Using mass spectrometry, we have identified two of them as testosterone (T) and 11-hydroxytestosterone (11HT). These steroids are synthesized in testes during full spermatogenesis, and they are excreted in male urine with milt. The third component is not a steroid. It is more likely to be a polyene alcohol (farnesol). 2Z,6E-Farnesol possesses behavioral activity.     

Properties of Co-doped N-type FeSi2 processed by mechanical alloying

Iron-silicide was produced with a mechanical alloying process and consolidated through vacuum hot pressing. The as-milled powders were of metastable state and fully transformed into the ß-FeSi₂ phase through subsequent isothermal annealing. The as-consolidated iron silicides consisted of an untransformed mixture of α-Fe₂Si₅ and ?-FeSi phases and a partially transformed β-FeSi₂ phase was found in the low density compact. Isothermal annealing was carried out to induce transformation into a thermoelectric semiconducting β-FeSi₂ phase. The transformation behavior of the β-FeSi₂ was investigated utilizing DTA, SEM, and XRD analyses. Isothermal annealing at 830°C in vacuum led to a thermoelectric semiconducting β-FeSi₂ phase transformation, but some residual metallic α and ?-phases were unavoidable even after 96 hours of annealing. The iron silicide microstructures were investigated using SEM and TEM. The mechanical and thermoelectric properties of the β-FeSi₂ materials before and after isothermal annealing are characterized in this study.