A comparative study of color measurement lntstrumentation

A multiplant Quality Improvement Team [QIT] was firmed to develop and implement an evaluation program for various color measurement .systems as potential replacements for the then-current aging systems. The emphasis qf this article is the analytical methodology utilized to evaluate the various color systems. The evaluation program consisted cf two phases. Phase I was a general overview/review of several systems, while Phase II was an extensive internal comparative evaluation measurement systems. These were Milton-Roy's ColorMate HDS, HunterLab's Ultrascan, Datacolor's CS-5, and BYK-Gardner's The Color Sphere [TCS]. The main comparison criteria were interinstrument agreement [agreement between two instruments ofthe same system], user-friendly software and computer interface capability, vendor amenability to a long-term logistical and maintenance relationship, and price. All systems were evaluated by duplicate measurements on various color tiles, yarns, and polymer flakes-over 1600 measurements on each system. The systems were compared with an instrument matrix, a decision matrix, and a product matrix. The instrument matrix was a comparison qfinstrument parameters, software/math treatments, and economics. The decision matrix was a forced ranking of each system by each criteria category [1–4 scale, with 1 representing the best and 4 representing the worst]. The product matrix accentuated the relative importance ofone criterion category over another by multiplying the forced ranking by the criticality of the category. The criticality of a given category wus determined by consensus within the QIT. Thr combination qf the three matrices allowed the evaluator[.s] t o select the color rneasuremmt system that best satixfied the color measurement needs and requirements of their facility and their products. For this evaluation, all ofthe evaluated systems were superior to the then-current agingsystems. As a result of this methodology, one instrument emerged as clearly superior. © 1994 John Wrley & Sons, Inc.     

Metallurgical Features of Plasma Surfacing Repair of Magnesium Alloys

Metallurgist - Results are provided for studying formation of the structure and properties of products made of high-strength light alloy ML5 of the magnesium-aluminum-manganese-zinc system using...     

Thermal expansion of an SiC particle-reinforced aluminum composite

Using a push-rod dilatometer, we measured between 76 and 390 K the thermal expansion of a particle-reinforced-composite wrought plate obtained by powdermetallurgy methods. The particles, 30% by volume, consisted of monocrystals of -SiC with sizes near 10 m. The matrix consisted of a 6061 aluminum alloy with original particle sizes near 20 m. We found the perpendicular thermal expansivity, ₃, higher by 26% than the in-plane thermal expansivity, ₁-₂. These values differ from a rule-of-mixture prediction by –3 and –23%, respectively. All three _i, components lie outside the Rosen-Hashin bounds. Levin's isotropic model agrees within 10% with the ₁-₂-₃ average. Both the anisotropy and the bounds violation result from microstructural nonhomogeneity arising from processing. Rosen and Hashin's transverse-isotropicsymmetry relationships account approximately for these effects by introducing the anisotropic elastic constants. Using neutron diffraction, we determined that the SiC particles are textureless.Paper presented at the Tenth International Thermal Expansion Symposium, June 6–7, 1989, Boulder, Colorado, U.S.A.     

Adaptation of an automotive dialogue system to users’ expertise and evaluation of the system

Spoken dialogue systems (SDSs) can be used to operate devices, e.g. in the automotive environment. People using these systems usually have different levels of experience. However, most systems do not take this into account. In this paper, we present a method to build a dialogue system in an automotive environment that automatically adapts to the user’s experience with the system. We implemented the adaptation in a prototype and carried out exhaustive tests. Our usability tests show that adaptation increases both user performance and user satisfaction. We describe the tests that were performed, and the methods used to assess the test results. One of these methods is a modification of PARADISE, a framework for evaluating the performance of SDSs [Walker MA, Litman DJ, Kamm CA, Abella A (Comput Speech Lang 12(3):317–347, 1998)]. We discuss its drawbacks for the evaluation of SDSs like ours, the modifications we have carried out, and the test results.

Temperature stability of thin anodic oxide films in metal/insulator/metal structures: A comparison between tantalum and aluminium oxide

The dielectric breakdown of thin (d = 3–4 nm) aluminium and tantalum oxide films was investigated by means of current voltage plots in metal/insulator/metal systems. Dielectric breakdown field strengths, E_DB, of 0.6 GV m^− 1 were found for both oxide types at room temperature. Differences appear in the temperature dependence of E_DB. Tantalum oxide films show an unchanged breakdown behaviour for temperatures up to 420 K while aluminium oxide films lose already 80% of their E_DB value in the same temperature range. Time-resolved investigations of the electric breakdown revealed intermediate states of both oxide types which were stable for several ms being characterized by an enhanced tunnel current. The breakdown voltage clearly scales with the oxide thickness for both oxide types.     

Geometric adaption of biodegradable magnesium alloy scaffolds to stabilise biological myocardial grafts. Part I

Synthetic patch materials currently in use have major limitations, such as high susceptibility to infections and lack of contractility. Biological grafts are a novel approach to overcome these limitations, but do not always offer sufficient mechanical durability in early stages after implantation. Therefore, a stabilising structure based on resorbable magnesium alloys could support the biological graft until its physiologic remodelling. To prevent early breakage in vivo due to stress of non-determined forming, these scaffolds should be preformed according to the geometry of the targeted myocardial region. Thus, the left ventricular geometry of 28 patients was assessed via standard cardiac magnetic resonance imaging (MRI). The resulting data served as a basis for a finite element simulation (FEM). Calculated stresses and strains of flat and preformed scaffolds were evaluated. Afterwards, the structures were manufactured by abrasive waterjet cutting and preformed according to the MRI data. Finally, the mechanical durability of the preformed and flat structures was compared in an in vitro test rig. The FEM predicted higher durability of the preformed scaffolds, which was proven in the in vitro test. In conclusion, preformed scaffolds provide extended durability and will facilitate more widespread use of regenerative biological grafts for surgical left ventricular reconstruction.     

Mechanical and moisture-dependent swelling properties of compressed Japanese cedar

In this research, five groups of compressed wood specimens were investigated, four made from compressed Japanese cedar (Cryptomeria japonica D. Don) with compression ratios (CR) of 33%, 50%, 67% and 70%, and one without compressing for control purpose. The measurements of moisture-dependent swelling of the specimens were carried out in the R, T and L directions, with typical strain values of 10%, 1.5% and 0.1% respectively corresponding to the CR = 67%. Mechanical property tests of the compressed wood were also undertaken. Material properties obtained cover radial and tangential swelling strain rates, shear moduli in LR, LT and RT planes, Young’s moduli in the L, R, T directions and Poisson ratios in all planes. The Young’s moduli along the longitudinal and radial directions have been increased by over 300% in relation to the CR of 70%.     

Recent Experiences with Listeria monocytogenes in New Zealand and development of a food control risk-based strategy

A risk-based strategy for Listeria monocytogenes has been developed by New Zealand Food Safety Authority. Incidents of L. monocytogenes in ready-to-eat foods reported to the regulatory authority were analysed to identify common factors that contributed to the contamination. In addition, the current regulatory framework and available food industry guidance were reviewed to prepare a strategy that will provide a consistent and informed approach to managing the risk of L. monocytogenes. Also recognised is the future impact of an aging population and an increase in the availability and range of chilled ready-to-eat foods that should be integrated into the strategy if an objective of ‘no increase in the reported incidence of foodborne listeriosis after five years’ is to be achieved.     

Comparative genomic hybridization: a comparison with molecular and cytogenetic analysis

A comparative analysis of the differentiation pattern, the proliferative behaviour, and the level of apoptosis between human benign and malignant neoplasms of smooth-muscle (SM) tissue is lacking. The clinical, histopathological, immunochemical, and immunocytochemical features of leiomyomas (LM) and leiomyosarcomas (LMS) were investigated by a panel of monoclonal antibodies specific for some differentiation markers of SM tissue (SM myosin and alpha-actin, desmin, and SM22) and for markers of non-muscle tissue (vimentin and non-muscle myosin). Proliferating normal and neoplastic cells were identified by proliferating-cell nuclear antigen (PCNA)/Ki67 immunostainings and the apoptotic cells were revealed by means of the terminal-deoxynucleotidyltransferase-mediated dUTP nick-end labelling technique. Gel electrophoresis and Western blotting, performed with anti-(SM1/SM2 myosin isoform) antibody, indicated quantitative differences between LMS and LM, which mirrored higher positive to negative nuclear ratios for PCNA, Ki67 and apoptosis in malignant as opposed to benign neoplasms. With LM, however, a similar SM1 to SM2 ratio could be associated with different proliferation levels. Uterine, gastric and intestinal LMS displayed specific patterns of SM1/SM2 and/or non-muscle myosin expression that were not paralleled by different levels of proliferation/apoptosis. While the level of PCNA/Ki67 correlated with the level of apoptosis in normal SM tissues and LM, that of LMS did not. In vivo at the cellular level, LM and uterine LMS displayed a near-uniform SM tissue differentiation, whereas the other LMS displayed a lesser or a heterogeneous immunoreactivity. In vitro, cultured LMS cells showed a limited and peculiar expression of SM myosin. In conclusion, there is no reciprocal relationship between degree of differentiation and the level of proliferation, as exemplified by the finding that the less differentiated intestinal LMS displays the lowest proliferative behaviour and that the relatively more differentiated gastric LMS/metastasis is more proliferative.